Efficient extraction method to collect sugar from sweet sorghum.

BACKGROUND: Sweet sorghum is a domesticated grass containing a sugar-rich juice that can be readily utilized for ethanol production. Most of the sugar is stored inside the cells of the stalk tissue and can be difficult to release, a necessary step before conventional fermentation. While this crop holds much promise as an arid land sugar source for biofuel production, a number of challenges must be overcome. One lies in the inherent labile nature of the sugars in the stalks leading to a short usable storage time. Also, collection of sugars from the sweet sorghum stalks is usually accomplished by mechanical squeezing, but generally does not collect all of the available sugars. RESULTS: In this paper, we present two methods that address these challenges for utilization of sweet sorghum for biofuel production. The first method demonstrates a means to store sweet sorghum stalks in the field under semi-arid conditions. The second provides an efficient water extraction method that can collect as much of the available sugar as feasible. Operating parameters investigated include temperature, stalk size, and solid-liquid ratio that impact both the rate of sugar release and the maximal amount recovered with a goal of low water use. The most desirable conditions include 30°C, 0.6 ratio of solid to liquid (w/w), which collects 90 % of the available sugar. Variations in extraction methods did not alter the efficiency of the eventual ethanol fermentation. CONCLUSIONS: The water extraction method has the potential to be used for sugar extraction from both fresh sweet sorghum stalks and dried ones. When combined with current sugar extraction methods, the overall ethanol production efficiency would increase compared to current field practices.

Nanowell-trapped charged ligand-bearing nanoparticle surfaces: a novel method of enhancing flow-resistant cell adhesion.

Assuring cell adhesion to an underlying biomaterial surface is vital in implant device design and tissue engineering, particularly under circumstances where cells are subjected to potential detachment from overriding fluid flow. Cell-substrate adhesion is a highly regulated process involving the interplay of mechanical properties, surface topographic features, electrostatic charge, and biochemical mechanisms. At the nanoscale level, the physical properties of the underlying substrate are of particular importance in cell adhesion. Conventionally, natural, pro-adhesive, and often thrombogenic, protein biomaterials are frequently utilized to facilitate adhesion. In the present study, nanofabrication techniques are utilized to enhance the biological functionality of a synthetic polymer surface, polymethymethacrylate, with respect to cell adhesion. Specifically we examine the effect on cell adhesion of combining: 1. optimized surface texturing, 2. electrostatic charge and 3. cell adhesive ligands, uniquely assembled on the substrata surface, as an ensemble of nanoparticles trapped in nanowells. Our results reveal that the ensemble strategy leads to enhanced, more than simply additive, endothelial cell adhesion under both static and flow conditions. This strategy may be of particular utility for enhancing flow-resistant endothelialization of blood-contacting surfaces of cardiovascular devices subjected to flow-mediated shear.

Detection and quantification of poliovirus infection using FTIR spectroscopy and cell culture.

BACKGROUND: In a globalized word, prevention of infectious diseases is a major challenge. Rapid detection of viable virus particles in water and other environmental samples is essential to public health risk assessment, homeland security and environmental protection. Current virus detection methods, especially assessing viral infectivity, are complex and time-consuming, making point-of-care detection a challenge. Faster, more sensitive, highly specific methods are needed to quantify potentially hazardous viral pathogens and to determine if suspected materials contain viable viral particles. Fourier transform infrared (FTIR) spectroscopy combined with cellular-based sensing, may offer a precise way to detect specific viruses. This approach utilizes infrared light to monitor changes in molecular components of cells by tracking changes in absorbance patterns produced following virus infection. In this work poliovirus (PV1) was used to evaluate the utility of FTIR spectroscopy with cell culture for rapid detection of infective virus particles. RESULTS: Buffalo green monkey kidney (BGMK) cells infected with different virus titers were studied at 1 - 12 hours post-infection (h.p.i.). A partial least squares (PLS) regression method was used to analyze and model cellular responses to different infection titers and times post-infection. The model performs best at 8 h.p.i., resulting in an estimated root mean square error of cross validation (RMSECV) of 17 plaque forming units (PFU)/ml when using low titers of infection of 10 and 100 PFU/ml. Higher titers, from 103 to 106 PFU/ml, could also be reliably detected. CONCLUSIONS: This approach to poliovirus detection and quantification using FTIR spectroscopy and cell culture could potentially be extended to compare biochemical cell responses to infection with different viruses. This virus detection method could feasibly be adapted to an automated scheme for use in areas such as water safety monitoring and medical diagnostics.

Biological approaches for addressing the grand challenge of providing access to clean drinking water.

The U.S. National Academy of Engineering (NAE) recently published a document presenting "Grand Challenges for Engineering". This list was proposed by leading engineers and scientists from around the world at the request of the U.S. National Science Foundation (NSF). Fourteen topics were selected for these grand challenges, and at least seven can be addressed using the tools and methods of biological engineering. Here we describe how biological engineers can address the challenge of providing access to clean drinking water. This issue must be addressed in part by removing or inactivating microbial and chemical contaminants in order to properly deliver water safe for human consumption. Despite many advances in technologies this challenge is expanding due to increased pressure on fresh water supplies and to new opportunities for growth of potentially pathogenic organisms.

Evaluation of select sensors for real-time monitoring of Escherichia coli in water distribution systems.

This study evaluated real-time sensing of Escherichia coli as a microbial contaminant in water distribution systems. Most sensors responded to increased E. coli concentrations, showing that select sensors can detect microbial water quality changes and be utilized as part of a contaminant warning system.

Opto-electrophoretic detection of bio-molecules using conducting chalcogenide glass sensors.

Novel telluride glasses with high electrical conductivity, wide infrared transparency and good resistance to crystallization are used to design an opto-electrophoretic sensor for detection and identification of hazardous microorganisms. The sensor is based on an attenuated total reflectance element made of Ge-As-Te glass that serves as both an optical sensing zone and an electrode for driving the migration of bio-molecules within the evanescent wave of the sensor. An electric field is applied between the optical element and a counter electrode in order to induce the migration of bio-molecules carrying surface charges. The effect of concentration and applied voltage is tested and the migration effect is shown to be reversible upon switching the electric field. The collected signal is of high quality and can be used to identify different bacterial genus through statistical spectral analysis. This technique therefore provides the ability to detect hazardous microorganisms with high specificity and high sensitivity in aqueous environments. This has great potential for online monitoring of water quality.

Cytotoxicity of bacterial-derived toxins to immortal lung epithelial and macrophage cells.

Health risks associated with inhalation and deposition of biological materials have been a topic of great concern due to highly publicized cases of inhalation anthrax, of new regulations on the release of particulate matter, and to increased concerns on the hazards of indoor air pollution. Here, we present an evaluation of the sensitivity of two immortal cell lines (A549, human lung carcinoma epithelia) and NR8383 (rat alveolar macrophages) to a variety of bacterial-derived inhalation hazards and simulants including etoposide, gliotoxin, streptolysin O, and warfarin. The cell response is evaluated through quantification of changes in mitochondrial succinate dehydrogenase activity, release of lactate dehydrogenase, initiation of apoptosis, and through changes in morphology as determined by visible light microscopy and scanning electron microscopy. These cells display dose-response relations to each toxin, except for triton which has a step change response. The first observable responses of the epithelial cells to these compounds are changes in metabolism for one toxin (warfarin) and alterations in membrane permeability for another (gliotoxin). The other four toxins display a similar time course in response as gauged by changes in metabolism and loss of membrane integrity. Macrophages are more sensitive to most toxins; however, they display a lower level of stability. This information can be used in the design of cell-based sensors responding to these and similar hazards.

Grand challenges for biological engineering.

Biological engineering will play a significant role in solving many of the world's problems in medicine, agriculture, and the environment. Recently the U.S. National Academy of Engineering (NAE) released a document "Grand Challenges in Engineering," covering broad realms of human concern from sustainability, health, vulnerability and the joy of living. Biological engineers, having tools and techniques at the interface between living and non-living entities, will play a prominent role in forging a better future. The 2010 Institute of Biological Engineering (IBE) conference in Cambridge, MA, USA will address, in part, the roles of biological engineering in solving the challenges presented by the NAE. This letter presents a brief outline of how biological engineers are working to solve these large scale and integrated problems of our society.

Integrated capture and spectroscopic detection of viruses.

The goal of this work is to develop an online monitoring scheme for detection of viruses in flowing drinking water. The approach applies an electrodeposition process that is similar to the use of charged membrane filters previously employed for collection of viruses from aqueous samples. In the present approach, charged materials are driven onto a robust optical sensing element which has high transparency to infrared light. A spectroscopic measurement is performed using the evanescent wave that penetrates no more than 1 mum from the surface of an infrared optical element in an attenuated total reflectance measurement scheme. The infrared measurement provides quantitative information on the amount and identity of material deposited from the water. Initial studies of this sensing scheme used proteins reversibly electrodeposited onto germanium chips. The results of those studies were applied to design a method for collection of viruses onto an attenuated total reflectance crystal. Spectral signatures can be discriminated between three types of protein and two viruses. There is the potential to remove deposited material by reversing the voltage polarity. This work demonstrates a novel and practical scheme for detection of viruses in water systems with potential application to near-continual, automated monitoring of municipal drinking water.

Utilization of cellulosic waste from tequila bagasse and production of polyhydroxyalkanoate (PHA) bioplastics by Saccharophagus degradans.

Utilization of wastes from agriculture is becoming increasingly important due to concerns of environmental impact. The goals of this work were to evaluate the ability of an unusual organism, Saccharophagus degradans (ATCC 43961), to degrade the major components of plant cell walls and to evaluate the ability of S. degradans to produce polyhydroxyalkanoates (PHAs, also known as bioplastics). S. degradans can readily attach to cellulosic fibers, degrade the cellulose, and utilize this as the primary carbon source. The growth of S. degradans was assessed in minimal media (MM) containing glucose, cellobiose, avicel, and bagasse with all able to support growth. Cells were able to attach to avicel and bagasse fibers; however, growth on these insoluble fibers was much slower and led to a lower maximal biomass production than observed with simple sugars. Lignin in MM alone did not support growth, but did support growth upon addition of glucose, although with an increased adaptation phase. When culture conditions were switched to a nitrogen depleted status, PHA production commences and extends for at least 48 h. At early stationary phase, stained inclusion bodies were visible and two chronologically increasing infrared light absorbance peaks at 1,725 and 1,741 cm(-1) confirmed the presence of PHAs. This work demonstrates for what we believe to be the first time, that a single organism can degrade insoluble cellulose and under similar conditions can produce and accumulate PHA. Additional work is necessary to more fully characterize these capabilities and to optimize the PHA production and purification.

Discrimination of bacteria and bacteriophages by Raman spectroscopy and surface-enhanced Raman spectroscopy.

Detection of pathogenic organisms in the environment presents several challenges due to the high cost and long times typically required for identification and quantification. Polymerase chain reaction (PCR) based methods are often hindered by the presence of polymerase inhibiting compounds and so direct methods of quantification that do not require enrichment or amplification are being sought. This work presents an analysis of pathogen detection using Raman spectroscopy to identify and quantify microorganisms without drying. Confocal Raman measurements of the bacterium Escherichia coli and of two bacteriophages, MS2 and PRD1, were analyzed for characteristic peaks and to estimate detection limits using traditional Raman and surface-enhanced Raman spectroscopy (SERS). MS2, PRD1, and E. coli produced differentiable Raman spectra with approximate detection limits for PRD1 and E. coli of 10(9) pfu/mL and 10(6) cells/mL, respectively. These high detection concentration limits are partly due to the small sampling volume of the confocal system but translate to quantification of as little as 100 bacteriophages to generate a reliable spectral signal. SERS increased signal intensity 10(3) fold and presented peaks that were visible using 2-second acquisitions; however, peak locations and intensities were variable, as typical with SERS. These results demonstrate that Raman spectroscopy and SERS have potential as a pathogen monitoring platform.

Phi29 pRNA vector for efficient escort of hammerhead ribozyme targeting survivin in multiple cancer cells.

Ribozymes are potential therapeutic agents which suppress specific genes in disease-affected cells. Ribozymes have high substrate cleavage efficiency, yet their medical application has been hindered by RNA degradation, aberrant cell trafficking, or misfolding when fused to a carrier. In this study, we constructed a chimeric ribozyme escorted by the motor pRNA of bacteriophage phi29 to achieve proper folding and enhanced stability. A pRNA molecule contains an interlocking loop domain and a 5'/3' helical domain, which fold independently of one another. When a ribozyme is connected to the helical domain, the chimeric pRNA/ribozyme reorganizes into a circularly permuted form, and the 5'/3' ends are relocated and buried in the original 71'/75' positions. Effective silencing of the anti-apoptotic gene survivin by an appropriately designed chimeric ribozyme, as demonstrated at mRNA and protein levels, led to programmed cell death in various human cancer cell lines, including breast, prostate, cervical, nasopharyngeal, and lung, without causing significant non-specific cytotoxicity. Through the interlocking interaction of right and left loops, monomer pRNA/ribozyme chimeras can be incorporated into multi-functional dimer, trimer and hexamer complexes for specific gene delivery. Using the phi29 motor pRNA as an escort may revive the ribozyme's strength in medical application.

Cellular evaluation of the toxicity of combustion derived particulate matter: influence of particle grinding and washing on cellular response.

There is increasing interest in continual monitoring of air for the presence of inhalation health hazards, such as particulate matter, produced through combustion of fossil fuels. Currently there are no means to rapidly evaluate the relative toxicity of materials or to reliably predict potential health impact due to the complexity of the composition, size, and physical properties of particulate matter. This research evaluates the feasibility of utilizing cell cultures as the biological recognition element of an inhalation health monitoring system. The response of rat lung type II epithelial (RLE-6TN) cells to a variety of combustion derived particulates and their components has been evaluated. The focus of the current work is an evaluation of how particles are delivered to a cellular sensing array and to what degree does washing or grinding of the particles impacts the cellular response. There were significant differences in the response of these lung cells to PM's of varying sources. Mechanical grinding or washing was found to alter the toxicity of some of these particulates; however these effects were strongly dependent on the fuel source. Washing reduced toxicity of oil PM's, but had little effect on those from diesel or coal. Mechanical grinding could significantly increase the toxicity of coal PM's, but not for oil or diesel.

Lung cell fiber evanescent wave spectroscopic biosensing of inhalation health hazards.

Health risks associated with the inhalation of biological materials have been a topic of great concern; however, there are no rapid and automatable methods available to evaluate the potential health impact of inhaled materials. Here we describe a novel approach to evaluate the potential toxic effects of materials evaluated through cell-based spectroscopic analysis. Anchorage-dependent cells are grown on the surface of optical fibers transparent to infrared light. The probe system is composed of a single chalcogenide fiber (composed of Te, As, and Se) acting as both the sensor and transmission line for infrared optical signals. The cells are exposed to potential toxins and alterations of cellular composition are monitored through their impact on cellular spectral features. The signal is collected via evanescent wave absorption along the tapered sensing zone of the fiber through spectral changes between 3,000 and 600 cm(-1) (3,333-16,666 nm). Cell physiology, composition, and function are non-invasively tracked through monitoring infrared light absorption by the cell layer. This approach is demonstrated with an immortalized lung cell culture (A549, human lung carcinoma epithelia) in response to a variety of inhalation hazards including gliotoxin (a fungal metabolite), etoposide (a genotoxin), and methyl methansesulfonate (MMS, an alkylating agent). Gliotoxin impacts cell metabolism, etoposide impacts nucleic acids and the cell cycle, and MMS impacts nucleic acids and induces an immune response. This spectroscopic method is sensitive, non-invasive, and provides information on a wide range of cellular damage and response mechanisms and could prove useful for cell response screening of pharmaceuticals or for toxicological evaluations.

Biologically inspired sensing: infrared spectroscopic analysis of cell responses to an inhalation health hazard.

This work describes the development of a biologically based sensing technique to quantify chemical agents that pose inhalation health hazards. The approach utilizes cultured epithelial cells (A549 human type II pneumocytes) of the lung, exposed to potential toxins and monitored through the noninvasive means of infrared spectroscopy to quantify changes to cell physiology and function. Cell response to Streptolysin O, a cholesterol-binding cytolysin, is investigated here. Infrared spectra display changes in cell physiology indicative of membrane damage, altered proteins, and some nucleic acid damage. Methods to improve cell adhesion through modification of support surface properties are detailed. This spectroscopic approach not only provides a robust means to detect potential toxins but also provides information on modes of damage and mechanisms of cellular response.

Application of design-of-experiments procedures to optimize efficiently pretreatment of lipase for use in a nonaqueous reaction.

A variety of different pretreatments can improve the performance of enzymes in nonpolar reaction media. These pretreatments have primarily been studied in isolation; however, interactions between some pairs of pretreatments are known to exist. The presence of these interactions complicates the design of an optimum multifactor pretreatment. Modern design-of-experiments techniques allow the simultaneous optimization of two or more variables. To improve the performance of lipase in a model reaction, we used a technique called the method of steepest ascent to optimize three variables simultaneously: pretreatment pH and sodium phosphate concentration, and the concentration of acetic acid (one of the reactants) in the reaction mixture. In only 26 experimental runs, this optimization process determined a combination of variable settings that yielded a reaction product approx 180 times faster than achieved with untreated enzyme. Evidence is presented to demonstrate that locating this optimum with single-factor experiments would be inefficient. This article demonstrates the efficiency of the method of steepest ascent particularly for evaluation of enzymatic reaction conditions exhibiting significant interactions.