Effects of ractopamine hydrochloride on the growth performance and carcass characteristics of heavy-weight finishing pigs sent for slaughter using a 3-phase marketing strategy.

A total of 2,158 crossbred pigs was used to evaluate the effects of feeding 7.4 mg/kg ractopamine hydrochloride (RAC) on the growth performance and carcass characteristics of heavy-weight finishing pigs sent to slaughter using a 3-phase marketing strategy. The study was performed from 121.0 ± 4.28 kg to 144.5 ± 4.73 BW using a randomized complete block design (blocking factor was d of start on test) with 2 treatments (0 vs. 7.4 mg/kg RAC). Pigs were housed in a commercial wean-to-finish facility in groups of approximately 25 (44 groups/treatment), with ad libitum access to feed and water throughout the study, and pen weights of pigs were recorded at the start (d 0), and on d 7, 21, and 35 of study. Pigs were sent for slaughter according to the following marketing strategy: 1) after 7 d on RAC, the heaviest 16% of each pen was sent for slaughter (Phase 1), 2) after 21 d on RAC, the next 40% of each pen was sent for slaughter (Phase 2), and 3) after 35 d on RAC, the remaining 44% of each pen was sent for slaughter (Phase 3). Pigs were selected for slaughter by visual appraisal and shipped to a commercial facility where standard carcass measurements (HCW, LM depth, and backfat depth) were measured. Overall, feeding RAC increased (P < 0.001) ADG (18.8%) and G:F (23.7%) compared to the control, but lowered (P < 0.001) ADFI (3.3%). In addition, feeding RAC increased (P < 0.001) HCW (3.9 kg), carcass yield (0.7% units), LM depth (5.0%), and predicted lean content (1.0% units), and reduced backfat depth (6.3% lower) compared to controls. With each subsequent phase of marketing, the magnitude of improvements in response to feeding RAC decreased for ADG (43.1, 20.9, and -3.1% for Phase 1, 2, and 3, respectively) and G:F (37.5, 25.8, and 6.4% for Phase 1, 2, and 3, respectively); however, improvements in HCW (1.6, 4.5, and 4.2 kg for Phase 1, 2, and 3, respectively), carcass yield (0.2, 0.6, and 0.9% units for Phase 1, 2, and 3, respectively), LM depth (2.3, 5.7, and 5.2% for Phase 1, 2, and 3, respectively), and predicted lean content (0.2, 1.0, and 1.3% units for Phase 1, 2, and 3, respectively) generally increased from feeding RAC. These results suggest that while improvements in growth performance from feeding RAC will generally decline after 21 d of feeding, improvements in carcass traits, particularly carcass yield and lean content, will continue with feeding RAC until d 35.

Effect of narasin (Skycis) or zinc bacitracin (Albac) inclusion on the growth performance and carcass characteristics of finishing pigs sent for slaughter using a 3-phase marketing strategy.

The objective of this study was to evaluate the effect of dietary inclusion of narasin or zinc bacitracin on the growth performance and carcass characteristics of finishing pigs sent for slaughter using a 3-phase marketing strategy. The study used 2,219 crossbred pigs in a randomized complete block design (blocking factor = start date) with 3 dietary treatments: 1) Control (no feed additive), 2) 15 mg/kg narasin (Skycis, Elanco Animal Health, Greenfield, IN), and 3) 28 mg/kg zinc bacitracin (Albac, Zoetis, Parsippany, NJ). Pigs were housed in single-sex pens of 25 pigs in a commercial wean-to-finish facility and there were 30 pen-replicates of each dietary treatment. All pigs were weighed as a group (i.e., pen) on d 0 (start of experimental feeding period), 77, 91, and 105 (end) of study. Pigs had ad libitum access to feed and water throughout the study period; all feed additions to the feeder were recorded. Pigs were sent for slaughter according to the following marketing strategy: 1) after 77 d on study, the heaviest 20% of each pen was sent for slaughter (Phase 1), 2) after 91 d on study, the next heaviest 48% of each pen were sent for slaughter (Phase 2), and 3) after 105 d on study, the remaining 32% of each pen was sent for slaughter (Phase 3). Pigs within each pen were selected for slaughter by visual appraisal of weight and shipped to a commercial slaughter facility where standard carcass measurements (HCW, LM depth, and backfat depth) were measured. Feeding narasin increased (P < 0.05) final live BW (1.3 kg) and overall ADG (1.1%) compared to the other treatments, which were similar (P > 0.05). Dietary treatment did not impact (P > 0.05) overall G:F. Feeding narasin increased (P < 0.05) HCW (1.4 kg) and carcass yield (0.3% units) compared to the other dietary treatments, which were similar (P > 0.05) for these traits. Overall, these results demonstrate that narasin-fed pigs had improved overall growth rate, HCW, and carcass yield compared to controls or pigs fed zinc bacitracin.

Ham and belly processing characteristics of immunological castrated barrows (Improvest) fed ractopamine hydrochloride (Paylean).

Effects of sex class (physically castrated, PC or immunologically castrated, IC) and diet (0 or 5mg/kg ractopamine hydrochloride, RAC) on characteristics of ham and bellies were determined from pigs slaughtered in three groups with similar ending live weights. One carcass per pen per marketing group (n=8) was selected to evaluate further processing characteristics. Data were analyzed as a 2×2 factorial design with a split plot in time and fixed effects of sex, diet, marketing group, and their interactions. IC fresh bellies were thinner (P<0.01) and softer (P<0.01) than PC bellies. IC hams and bellies were leaner (P<0.05) than those from PC pigs. RAC feeding did not affect (P>0.05) fresh ham or belly characteristics but decreased (P<0.01) fat in cured PC bellies. Marketing group affected (P<0.05) fresh quality, processing characteristics, and composition of hams and bellies. Immunological castration and RAC produced leaner finished products but did not alter processing yield of hams or bacon.

Effects of narasin (Skycis) on live performance and carcass traits of finishing pigs sold in a three-phase marketing system.

The objective was to evaluate the effect of feeding narasin (Skycis; Elanco Animal Health, Greenfield, IN) on growth performance and carcass characteristics of finishing pigs sold in a 3-phase marketing system. Pigs ( = 1,232) were housed in 56 single-sex pens (22 pigs/pen) divided into 2 even blocks based on initiation of treatment. Each treatment × sex combination was replicated 14 times. Pigs were fed either 0 mg/kg narasin (control) or 15 mg/kg narasin for up to 85 d of finishing (initiated at an average of 52.95 kg BW). In each pen, 18% (4 pigs per pen) of pigs were sold in the first marketing group (Day 64 of dietary treatment), 50% (11 of the original 22) were sold in the second marketing group (Day 78), and 32% (the remaining 7 pigs) were sold in the third marketing group (Day 85). Data were analyzed as a randomized complete block design with pen as the experimental unit. The model included the fixed effects of diet, sex, and their interaction. Block and replicate nested within block were random variables. Carcass data from pigs in marketing group 3 of block 2 was not collected due to inclement weather. Narasin had no effect on growth performance traits ( ≥ 0.15) in phases 1 (Days 1-28) or 2 (Days 29-56), regardless of sex. Barrows fed narasin had a 2.0% greater overall (Day 0-85) ADG than barrows fed the control diet ( < 0.01), but ADG of gilts was not different due to diet ( = 0.69). Regardless of sex, narasin improved ( = 0.03) feed efficiency (G:F) by 1.3% throughout the 85-d feeding period. There were no effects ( ≥ 0.21) of narasin on carcass composition in marketing groups 1 and 2. Narasin-fed barrows in marketing group 3 had 0.9 percentage units lower ( < 0.01) estimated carcass lean compared with barrows fed control diets (51.0 vs. 52.0%); no difference existed in gilts ( = 0.21). This is likely due to narasin-fed barrows of marketing group 3 tending ( = 0.06) to have 7.7% greater fat depth than control barrows of marketing group 3. Pooled effects (across all 3 marketing groups) of feeding narasin tended ( = 0.08) to reduce loin depth by 1.1% (60.00 vs. 60.66 mm), but there were no effects on fat depth ( = 0.24) or estimated carcass lean ( = 0.11). Overall, narasin can be used during the last 85 d of feeding to increase feed efficiency of barrows and gilts with minimal impact on carcass composition.

Effects of feeding ractopamine hydrochloride (Paylean) to physical and immunological castrates (Improvest) in a commercial setting on carcass cutting yields and loin quality.

Effects of feeding ractopamine (RAC; 5 mg/kg) to physically castrated (PC) and immunologically castrated (IC) pigs on carcass characteristics, cutting yields, and loin quality were evaluated using 285 carcasses. Male pigs were randomly assigned to sex treatments (PC and IC) at birth and fed the same nursery diets before allotment into 32 pens with 22 pigs per pen in a grow-finish barn. Pigs in the PC group were physically castrated at approximately 5 d of age, and pigs in the IC group were administered Improvest at 11 and 18 wk of age. Diet treatments (control or RAC) were initiated on study d 87. Pigs were marketed at 12 d (4.5 wk post-second Improvest dose), 19 d (5.5 wk post-second Improvest dose), and 33 d (7.5 wk post-second Improvest dose) following the start of final diet treatments. Three carcasses per pen were selected for evaluation of cutting yields and loin quality. Data were analyzed using PROC MIXED in SAS with fixed effects of sex, diet, market group, and their interaction; carcass (N = 285) was the experimental unit. Carcasses from RAC-fed pigs were heavier (P < 0.01) and had deeper (P = 0.02) loins than control-fed carcasses. Carcasses from IC pigs were similar (P = 0.22) in weight but had less (P < 0.01) fat and shallower (P = 0.02) loins when compared to PC carcasses. There were differences (P < 0.05) among market groups for carcass weights, fat depths, loin depths, and estimated carcass leanness. For cutting yields, RAC-fed carcasses had greater (P ≤ 0.03) bone-in lean and total carcass cutting yields than control-fed carcasses while there were no differences (P > 0.05) between RAC-fed and control-fed carcasses when evaluating LM color, marbling, firmness, pH, drip loss, and tenderness. Carcasses from IC pigs had greater (P < 0.05) boneless lean yields, bone-in lean yields, and total carcass cutting yields than PC carcasses. There were minimal differences (P < 0.05) in LM marbling, firmness, composition, and tenderness between PC and IC pigs. There was an interaction (P = 0.03) between sex and diet for LM composition. Control-fed PC loins had more (P < 0.01) lipid than all other treatment combinations. Market group had effects (P < 0.05) on carcass cutting yields, LM color, marbling and firmness scores, pH, purge loss, composition, and tenderness. The results from this study indicated RAC and immunological castration were additive in terms of improving carcass cutting yields while having minimal effects on pork quality.

Effects of feeding ractopamine hydrochloride (Paylean) to physical and immunological castrates (Improvest) in a commercial setting on growth performance and carcass characteristics.

Growth performance and carcass characteristics of physically castrated (PC) and immunologically castrated (IC) pigs fed ractopamine hydrochloride (RAC; 5 mg/kg) were evaluated in 64 pens of 22 pigs each. Male pigs were randomly assigned to castration method at birth. Pigs in the PC group were physically castrated at 5 d of age while IC pigs were administered Improvest at 11 and 18 wk of age. Pigs entered the grow-finish barn at approximately 9 wk of age (d 0). Dietary treatments (control or RAC) were initiated on d 87. Final treatment arrangement was a 2 × 2 factorial of castration method and diet. Data were analyzed using a mixed model with fixed effects of castration method, diet, market group, and all 2- and 3-way interactions. Pen was the experimental unit. From d 0 to 65, IC pigs had 11.2% greater (P < 0.01) G:F and 11.6% less (P < 0.01) ADFI than PC pigs, but ADG was increased 1.0% in PC pigs compared with IC pigs (P < 0.01). From d 65 to 87, IC pigs had 7.9% greater (P < 0.01) ADG and 12.1% greater (P < 0.01) G:F than PC pigs while having similar (P = 0.16) ADFI. At the initiation of diet (RAC) treatments, BW of all treatments were similar (P ≥ 0.32). From d 87 to 120 (RAC feeding period), IC pigs had 10.0% greater (P < 0.01) ADG and 10.5% greater (P < 0.01) ADFI than PC pigs while having similar (P = 0.64) G:F. Feeding RAC increased (P < 0.01) ADG by 16.9% and G:F by 17.9% while having no effect (P = 0.42) on ADFI from d 87 to 120. There were no significant interactions between castration method and diet on growth performance from d 87 to 120. For the entire study (d 0-120), IC pigs had 2.6% greater (P < 0.01) ADG, 4.6% less (P < 0.01) ADFI, and 7.3% greater (P < 0.01) G:F than PC pigs. Averaged over market groups, IC pigs were 2.5 kg heavier (P < 0.01) and had similar (P = 0.10) carcass weights and 1.8 percentage units less (P < 0.01) dressing yields than PC pigs. Additionally, IC pigs had 1.3 mm less (P < 0.01) fat and 1.7 mm less (P < 0.01) loin depth than PC pigs. Pigs fed RAC were 2.9 kg heavier (P < 0.01) and had 2.3 kg heavier (P < 0.01) carcasses and 2.2 mm deeper (P < 0.01) loins but similar (P = 0.21) dressing yields and tended (P < 0.10) to have 0.4 mm less fat than control-fed pigs when averaged over market groups. Group 3 pigs were the heaviest (P < 0.01) at slaughter and had the heaviest (P < 0.01) carcasses, greatest (P < 0.01) dressing yields, and the most (P < 0.01) carcass fat of all market groups. Overall, immunological castration and RAC were additive in terms of improving growth performance and carcass characteristics.

Impact of ractopamine hydrochloride on growth, efficiency, and carcass traits of finishing pigs in a three-phase marketing strategy.

The objectives were to determine the effects of ractopamine hydrochloride (RAC) in a 3-phase marketing strategy. One thousand seven hundred forty pigs were used in 80 single-sex pens in 2 blocks. Each pen housed approximately 22 pigs. Sixteen percent of the total population of pigs was sold during the first marketing period, 18% was sold during the second marketing period, and the remaining 66% was sold during the third marketing period. Data were analyzed as a randomized complete block design of 2 treatments. Pigs in the second marketing group had greater growth performance indicators than pigs in the first marketing group. Over the entire feeding period, pigs fed RAC were 2.73 kg heavier (P < 0.0001), had 0.11 kg/d greater (P < 0.0001) ADG, and had 0.04 greater (P < 0.0001) G:F than pigs not fed RAC. Hot carcass weights were 3.3% greater (P < 0.0001), carcass yields were 0.68 (% units) greater (P < 0.0001), fat depth was 7.2% less (P < 0.0001), loin depth was 5.6% greater (P < 0.0001), and estimated carcass lean was 0.97% units greater (P < 0.0001) in RAC-fed pigs when compared with pigs not fed RAC. By the end of the first marketing period carcasses from pigs fed RAC (89.73 kg) were 2.1% heavier (P = 0.04) and gained 0.19 kg/d more (P = 0.03) carcass weight than carcasses from pigs not fed RAC (87.89 kg). By the end of the second marketing period carcasses from pigs fed RAC (99.00 kg) were 3.1% heavier (P < 0.001) and gained 0.14 kg/d more (P < 0.001) carcass weight than carcasses from pigs not fed RAC (96.02 kg). By the end of the third marketing period carcasses from pigs fed RAC (102.75 kg) were 3.7% heavier (P < 0.0001) and gained 0.10 kg/d more (P < 0.0001) carcass weight than carcasses from pigs not fed RAC (99.06 kg). Although carcass gain per day decreased with extended RAC feeding duration, HCW advantages continued to increase as feeding duration was increased from 7 d to 35 d. Growth benefits were evident during the initial marketing period, but as duration increased differences diminished. Therefore, RAC can provide the expected growth performance benefits when included in the diet for up to 21 d, but HCW advantages continue to increase throughout the entire 35 d feeding period. Even though carcass benefits were not as evident in pigs sold during the first marketing period, advantages (particularly HCW) continued to increase with each marketing period.

Meta-analysis of the effects of ractopamine hydrochloride on carcass cutability and primal yields of finishing pigs.

The objective was to summarize previous literature, using a meta-analysis approach, on the effects of ractopamine hydrochloride (RAC) when fed at doses of 5 to 10 mg/kg for up to 35 d before harvest on carcass cutability and belly quality of finishing pigs. The meta-analysis provided an opportunity to determine the consensus of previously published literature. Ten studies were evaluated to determine cutting yields and 8 studies were used to determine belly quality in this review. Pooled dietary RAC concentrations (5 mg/kg, 7.4 mg/kg, 10 mg/kg, and step-up feeding programs) and pooled feeding durations (up to 35 d before harvest) were compared with pigs not fed RAC (controls) and were analyzed as a meta-analysis using the mixed procedure of SAS. Ractopamine inclusion was the fixed effect in the model and the individual study was considered a random variable. The only difference between RAC and control pigs for whole primals as a percentage of side weight was the whole ham (P < 0.01). No other differences were detected for whole primals as a percentage of side weight. Yet, differences were detected in the standardized trimmed primal yields. A difference (P < 0.05) in percentages of the side weight was detected for the Boston butt, trimmed loin, and trimmed ham. This translated into RAC pigs having a carcass cutting yield (74.70% vs. 73.69%, respectively; P = 0.02; SED = 0.33) advantage of 1.01% units and a bone in lean cutting yield (61.43% vs. 60.33%, respectively; P = 0.03; SED = 0.40) advantage of 1.10% units when compared with control pigs. The advantage in bone-in cutability was a result of increased boneless sub primal yields in each of the lean cuts (shoulder, loin, and ham). When further evaluated, RAC pigs had a boneless shoulder (Boston butt + picnic) yield advantage of 0.32% units (P < 0.01; SED = 0.11), a 0.43% unit (P = 0.01; SED = 0.13) yield advantage in the boneless loin (Canadian back + tenderloin + sirloin), and a 0.51% unit (P < 0.001; SED = 0.11) advantage in the boneless ham (inside + outside + knuckle). A boneless yield was calculated using a summation of the percentage of side weight from the boneless shoulder, boneless loin, and boneless ham, which resulted in a 1.08% unit (36.28% vs. 35.20%, respectively; P = 0.002; SED = 0.25) advantage of RAC pigs when compared with control pigs. There were no subprimal yield differences (P = 0.93) in the trimmed belly between RAC pigs (12.18%) and control pigs (12.18%). However, RAC pigs (15.27 cm; 73.42) had narrower flop distances (P = 0.02; SED = 0.62) and greater iodine values (P = 0.01; SED = 0.33), respectively, when compared with control pigs (17.08 cm; 71.48).

Characterization of striping in fresh, enhanced pork loins.

To investigate the striping phenomenon in fresh, enhanced pork, a series of experiments were undertaken to identify possible causes of the problem. No one factor (individual brine components, brine pH, ingredient concentration, enhancement pressure, meat and brine pH, or enhancement level) was specifically identified, which could be used to reduce the severity of the striping problem. Furthermore, tumbling the product for 2h, did not reduce the amount of striping, indicating once striping has occurred, it is permanent. Evaluation of the striping pattern indicates that the stripes are formed not only at the needle injection site, but also follow the muscle fiber orientation. The use of darker pork provided more of a contrast when evaluating striping, thus exacerbating the perceived level of striping.

Intramuscular fat content has little influence on the eating quality of fresh pork loin chops.

Fresh pork loins (n = 290) were selected from a commercial packing facility based on subjective marbling of the intact loin and 24-h pH to determine the influence of marbling on sensory attributes. The study was designed using pigs from a similar genetic background, raised in similar production facilities, and slaughtered on a single kill day to minimize the effects of genetics, management, environment, and slaughter day. Loins were vacuum-packaged, transported to the University of Illinois Meat Science Laboratory, and aged for 7 d, after which a chop was removed from the area of the tenth rib for proximate analysis. Quality measurements, including National Pork Producers Council color, marbling, and firmness, ultimate pH, Minolta L*, a*, and b*, and drip loss, were determined after aging. After the proximate composition was completed, 150 loins were selected to provide a continuous and uniform distribution of extractable lipid, ranging from 1 to 8%, and a pH range from 5.5 to 5.8. Trained sensory panel analyses (end point cooking temperatures of 62, 71, or 80 degrees C) as well as measurement of Warner-Bratzler shear force (cooked to 71 degrees C) were performed on chops from the 150 loins. Consumer evaluation was also conducted on a subset (n = 40) of these loins, which were broken down into 5 discrete levels of intramuscular lipid, with averages of 1.6, 2.5, 3.6, 4.5, and 5.7% extractable lipid. Consumers were also asked to select the chops they would most prefer from a retail display case based on the amount of marbling present. Results from the consumer portion of the study indicated that intramuscular fat content had limited effects on perceived tenderness, juiciness, pork flavor, and oiliness; some significant differences (P < 0.05) were detectable, but they were numerically small. Most consumers also selected lean chops from the retail case, with nearly 50% selecting chops with less than 1.7% extractable lipid. Warner-Bratzler shear force was negatively related (P < 0.0001) to extractable lipid, with an R(2) value of 0.10. Results from the trained panel sensory analysis indicate that the percentage of extractable lipid did not correlate strongly with perceived tenderness, juiciness, or pork flavor for this group of pork loins that was controlled for genetics, pH, management, and day of slaughter.

Evaluating an objective method to measure fresh pork loin firmness.

The purpose of this study was to develop an objective method for measuring fresh pork loin firmness. A total of 42 fresh boneless pork loins were collected from a range of subjective firmness scores based on the whole boneless loin to create a population suitable for creating a prediction equation. Loins were subjectively scored by panelists prior to objectively being measured with a Texture Analyzer. An R(2) value of 0.54 was achieved for the prediction equation that was generated. A second trial was performed to test the equation resulting in an R(2) value of 0.30 concerning subjective and objective values. The results from these studies indicate that it is possible to create a standardized protocol in order to determine objective firmness that would be useful for future studies and for the development of hand held or online firmness measuring devices.

The effects of ractopamine hydrochloride on lean carcass yields and pork quality characteristics.

One hundred eighty barrows were evaluated to determine the effects of ractopamine hydrochloride (RAC) on lean carcass yields and pork quality. The pens were blocked by weight (six pens per block) with starting block weights of 69.0, 70.7, 73.8, 76.6, 78.4, and 84.3 kg. Pens within a block were assigned randomly to one of three RAC treatments so each treatment in a block was replicated twice. Treatments (as-fed basis) included control diet, 10 ppm of RAC added (R10), and 20 ppm of RAC added (R20) and ranged from 25 to 41 d depending on block. Pigs were slaughtered by blocks when block average live weights were 109 kg. Gain and feed efficiency were improved (P < 0.05) with increasing dietary concentrations of RAC, but feed intake did not differ (P > 0.05). Dressing percentage was higher (P < 0.05) for RAC-treated pigs. Subjective color, firmness, marbling scores, and Minolta L* reflection of the LM were not different (P > 0.05) among treatments. Carcass weights were heavier (P < 0.05) for pigs treated with RAC compared with control pigs and were higher for R20 than for R10. The RAC-fed pigs had greater (P < 0.05) yields (actual and percentage of HCW) of the following Institutional Meat Purchase Specification (IMPS) cuts than control pigs: trimmed, boneless ham (IMPS-402C and IMPS-402G), loin (IMPS-414), sirloin, and Boston butt (IMPS-406A). Pigs treated with RAC had a greater (P < 0.05) percentage of fat-free lean trimmings (IMPS-418) than did control pigs. Pigs treated with the R20 concentration had increased (P < 0.05) water-holding capacity compared with control pigs. Purge loss decreased linearly (P < 0.05) with increasing RAC compared with control for 14-d aged, non-enhanced loins. Warner-Bratzler shear (WBS) force values measured for nonenhanced chops were greater for RAC-treated pigs than for control pigs with a low dose response (P = 0.001). Enhanced chop (salt and phosphate injection) WBS values did not differ (P > 0.05) among dietary treatments. Trained sensory evaluation panel results for tenderness decreased in a low-dose plateau response fashion for nonenhanced chops (P = 0.004). Tenderness of enhanced chops decreased linearly (P = 0.04) with increasing RAC concentrations. No differences (P > 0.05) were found in juiciness or flavor of enhanced or nonenhanced chops. Feeding RAC to late-finishing swine resulted in faster growing, more efficient animals with increased boneless subprimal yields, and it had little effect on pork juiciness and flavor.

Effects of different cereal grains and ractopamine hydrochloride on performance, carcass characteristics, and fat quality in late-finishing pigs.

Forty-eight barrows and forty-eight gilts (PIC 337 sires x PIC C22 dams) were evaluated to determine the effects of feeding ractopamine hydrochloride (RAC) and different cereal grains on the carcass and fat quality in late finishing pigs. The study was carried out using four replicates with 24 animals in each replicate (four pigs per pen, six pens per replicate, two replicates per slaughter date, 12 pens per slaughter date). Treatments for the experiment included corn, wheat, and barley (early finisher period); and corn, corn + RAC, wheat, wheat + RAC, barley, and barley + RAC for the late finisher period. Ractopamine was fed at the level of 10 mg/kg (as-fed basis) of feed. Pigs were allotted to early finisher period treatments at approximately 45 kg BW. Pigs were then given late finisher period treatments at approximately 80 kg BW and fed for 28 d. The dietary digestible lysine level for all diets was maintained at 2.7 g/Mcal of ME. Pigs fed the wheat and corn diets during the late finisher period had a greater (P <0.05) G:F than those fed the barley diets. Pigs fed diets with RAC had lower (P <0.05) leaf fat weights, 10th-rib fat, last-rib fat, and belly firmness and had improved (P <0.05) dressing percents and loin muscle areas compared with those not receiving RAC. Pigs fed the wheat diets had a greater (P <0.05) dressing percent than those receiving the barley diets, but pigs fed the barley diets had a higher (P <0.05) Minolta L* for fat color than pigs fed wheat. Pigs fed diets containing RAC produced pork that was less tender (P <0.05) compared with pigs that did not receive RAC. Linoleic acid percent values were higher (P <0.05) for pigs fed diets with RAC than in those that did not. Feeding RAC improved G:F and lowered feed intake of pigs during the late finisher period (P <0.05). Feeding diets equal in lysine (2.7 g/Mcal of ME) but varying in ME, whether based on corn, wheat, or barley with or without RAC, had little to no effect on carcass, meat, or fat quality attributes.