Biochip∕laser cell deposition system to assess polarized axonal growth from single neurons and neuron∕glia pairs in microchannels with novel asymmetrical geometries.

Axon path-finding plays an important role in normal and pathogenic brain development as well as in neurological regenerative medicine. In both scenarios, axonal growth is influenced by the microenvironment including the soluble molecules and contact-mediated signaling from guiding cells and cellular matrix. Microfluidic devices are a powerful tool for creating a microenvironment at the single cell level. In this paper, an asymmetrical-channel-based biochip, which can be later incorporated into microfluidic devices for neuronal network study, was developed to investigate geometric as well as supporting cell control of polarized axonal growth in forming a defined neuronal circuitry. A laser cell deposition system was used to place single cells, including neuron-glia pairs, into specific microwells of the device, enabling axonal growth without the influence of cytophilic∕phobic surface patterns. Phase microscopy showed that a novel "snag" channel structure influenced axonal growth in the intended direction 4:1 over the opposite direction. In heterotypic experiments, glial cell influence over the axonal growth path was observed with time-lapse microscopy. Thus, it is shown that single cell and heterotypic neuronal path-finding models can be developed in laser patterned biochips.

Development of human umbilical vein endothelial cell (HUVEC) and human umbilical vein smooth muscle cell (HUVSMC) branch/stem structures on hydrogel layers via biological laser printing (BioLP).

Angiogenesis is one of the prerequisite steps for viable tissue formation. The ability to influence the direction and structure in the formation of a vascular system is crucial in engineering tissue. Using biological laser printing (BioLP), we fabricated branch/stem structures of human umbilical vein endothelial cells (HUVEC) and human umbilical vein smooth muscle cells (HUVSMC). The structure is simple as to mimic vascular networks in natural tissue but also allow cells to develop new, finer structures away from the stem and branches. Additionally, we printed co-culture structures by first depositing only HUVECs, followed by 24 h incubation to allow for adequate cell-cell communication and differentiation into lumina; these cell printed scaffold layers were then removed from incubation and inserted into the BioLP apparatus so that HUVSMCs could be directly deposited on top and around the previously printed HUVEC structures. The growth and differentiation of these co-culture structures was then compared to the growth of printed samples with either HUVECs or HUVSMCs alone. Lumen formation was found to closely mimic the original branch and stem structure. The beginning of a network structure is observed. HUVSMCs acted to limit HUVEC over-growth and migration when compared to printed HUVEC structures alone. HUVSMCs and HUVECS, when printed in close contact, appear to form cell-cell junctions around lumen-like structures. They demonstrate a symbiotic relationship which affects their development of phenotype when in close proximity of each other. Our results indicate that it is possible to direct the formation and growth of lumen and lumen network using BioLP.

Methods for imaging Shewanella oneidensis MR-1 nanofilaments.

Nanofilament production by Shewanella oneidensis MR-1 was evaluated as a function of lifestyle (planktonic vs. sessile) under aerobic and anaerobic conditions using different sample preparation techniques prior to imaging with scanning electron microscopy. Nanofilaments could be imaged on MR-1 cells grown in biofilms or planktonically under both aerobic and anaerobic batch culture conditions after fixation, critical point drying and coating with a conductive metal. Critical point drying was a requirement for imaging nanofilaments attached to planktonically grown MR-1 cells, but not for cells grown in a biofilm. Techniques described in this paper cannot be used to differentiate nanowires from pili or flagella.

Printing of protein microarrays via a capillary-free fluid jetting mechanism.

Current proteomics experiments rely upon printing techniques such as ink jet, pin, or quill arrayers that were developed for the creation of cDNA microarrays. These techniques often do not meet the requirements needed for successful spotting of proteins to perform high-throughput, array-based proteomic profiling. Biological laser printing (BioLP) is a spotting technology that does not rely on solid pins, quill pins, or capillary-based fluidics. The non-contact mechanism of BioLP utilizes a focused laser pulse to transfer protein solutions, thereby eliminating the potential for orifice clogging, air bubbles, and unnecessary volume loss potentially encountered in commercially available spotting technologies. The speed and spot-to-spot reproducibility of BioLP is comparable to other techniques, while the minimum spot diameter and volume per printed droplet is significantly less at 30 microm and approximately 500 fL, respectively. The transfer of fluid by BioLP occurs through a fluid jetting mechanism, as observed by high-speed images of the printing process. Arraying a solution of BSA with subsequent immunodetection demonstrates the reproducible spotting of protein in an array format with CVs of <3%. Printing of the enzyme alkaline phosphatase followed by a positive reaction with a colorimetric substrate demonstrates that functional protein can be spotted using this laser-based printer.

Biological laser printing: a novel technique for creating heterogeneous 3-dimensional cell patterns.

We have developed a laser-based printing technique, called biological laser printing (BioLP). BioLP is a non-contact, orifice-free technique that rapidly deposits fL to nL scale volumes of biological material with spatial accuracy better than 5 microm. The printer's orifice-free nature allows for transfer of a wide range of biological material onto a variety of substrates. Control of transfer is performed via a computer-aided design/computer-aided manufacturing (CAD/CAM) system which allows for deposition rates up to 100 pixels of biological material per second using the current laser systems. In this article, we present a description of the apparatus, a model of the transfer process, and a comparison to other biological printing techniques. Further, examples of current system capabilities, such as adjacent deposition of multiple cell types, large-scale cell arrays, and preliminary experiments on creating multi-layer cell constructs are presented. These cell printing experiments not only demonstrate near 100% viability, they also are the first steps toward using BioLP to create heterogeneous 3-dimensional constructs for use in tissue engineering applications.

Biological laser printing of genetically modified Escherichia coli for biosensor applications.

One of the primary requirements of cell- or tissue-based sensors is the placement of cells and cellular material at or near the sensing elements of the device. The ability to achieve precise, reproducible and rapid placement of cells is the focus of this study. We have developed a technique, biological laser printing or BioLP, which satisfies these requirements and has advantages over current technologies. BioLP is capable of rapidly depositing patterns of active biomolecules and living cells onto a variety of material surfaces. Unlike ink jet or manual spotting techniques, this process delivers small volume (nl to fl) aliquots of biomaterials without the use of an orifice, thus eliminating potential clogging issues and enabling diverse classes of biomaterials to be deposited. This report describes the use of this laser-based printing method to transfer genetically-modified bacteria capable of responding to various chemical stressors onto agar-coated slides and into microtiter plates. The BioLP technology enables smaller spot sizes, increased resolution, and improved reproducibility compared to related technologies.

Picoliter-scale protein microarrays by laser direct write.

We demonstrate the accurate picoliter-scale dispensing of active proteins using a novel laser transfer technique. Droplets of protein solution are dispensed onto functionalized glass slides and into plastic microwells, activating as small as 50-microm diameter areas on these surfaces. Protein microarrays fabricated by laser transfer were assayed using standard fluorescent labeling techniques to demonstrate successful protein and antigen binding. These results indicate that laser transfer does not damage the active site of the dispensed protein and that this technique can be used to successfully fabricate a functioning protein microarray. Also, as a result of the efficient nature of the process, material usage is reduced by two to four orders of magnitude compared to conventional pin dispensing methods for protein spotting.

Generation of mesoscopic patterns of viable Escherichia coli by ambient laser transfer.

We have generated mesoscopic patterns of viable Escherichia coli on Si(1 1 1), glass, and nutrient agar plates by using a novel laser-based transfer process termed matrix assisted pulsed laser evaporation direct write (MAPLE DW). We observe no alterations to the E. coli induced by the laser-material interaction or the shear forces during the transfer. Transferred E. coli patterns were observed by optical and electron microscopes, and cell viability was shown through green fluorescent protein (GFP) expression and cell culturing experiments. The transfer mechanism for our approach appears remarkably gentle and suggests that active biomaterials such as proteins, DNA and antibodies could be serially deposited adjacent to viable cells. Furthermore, this technique is a direct write technology and therefore does not involve the use of masks, etching, or other lithographic tools.