Layer-by-layer deposition of tannic acid and Fe³âº cations is of electrostatic nature but almost ionic strength independent at pH 5.

The step-by-step assembly of tannic acid (TA) and of Fe(3+) cations allows to produce films of controlled thickness using exclusively small multivalent ions. In the present investigation, it is shown that even if electrostatic interactions are dominant over ligand to metal charge transfer interactions in stabilizing such films, those electrostatic interactions display a small sensitivity to concentration in NaCl used as a supporting electrolyte as well as to the concentration in sodium acetate in the absence of NaCl. This finding highlights the strong stability of the films obtained through the step-by-step deposition of TA and Fe(3+) cations. Complementarily, the films made from 6 deposition cycles of TA and Fe(3+) cations do not form Prussian Blue when put in contact with hexacyanoferrate anions. This shows that Fe(3+) is so tightly bound to the film that it is not able to form a coordination polymer with Fe(CN)6(4-) anions.

Multilayer films made from poly(allylamine) and phosphorous containing polyoxometalates: focus on the zeta potential.

The physicochemical characterization of coatings deposited in a step-by-step (SBS) manner relies most often on thickness and homogeneity measurements by means of atomic force microscopy. In the case of coatings produced from oppositely charged species, their surface potential, estimated through their zeta potential, was for a long time expected to change alternatively as a prerequisite for the film deposition. However, some counterexamples appeared in the literature where the growth of the coating was observed when the number of deposition steps was increased but without a regular change in the sign of the surface potential. These data showed that the interpretation of the zeta potential of SBS deposited films should be subjected to more attention. In this article, we show the occurrence of ionic strength dependent instability of the surface potential of films made from the alternated deposition of poly(allylamine hydrochloride) and polyoxoanions. This instability may be due to a structural change in the coating, but we cannot exclude some shear induced desorption during the zeta potential measurement. In addition, a change in ionic strength between the deposition of the coating and the measurement of its streaming potential can have a huge importance on the result.

Collagen-based fibrillar multilayer films cross-linked by a natural agent.

Surface functionalization plays an important role in the design of biomedical implants, especially when layer forming cells, such as endothelial or epithelial cells, are needed. In this study, we define a novel nanoscale surface coating composed of collagen/alginate polyelectrolyte multilayers and cross-linked for stability with genipin. This buildup follows an exponential growth regime versus the number of deposition cycles with a distinct nanofibrillar structure that is not damaged by the cross-linking step. Stability and cell compatibility of the cross-linked coatings were studied with human umbilical vein endothelial cells. The surface coating can be covered by a monolayer of vascular endothelial cells within 5 days. Genipin cross-linking renders the surface more suitable for cell attachment and proliferation compared to glutaraldehyde (more conventional cross-linker) cross-linked surfaces, where cell clumps in dispersed areas were observed. In summary, it is possible with the defined system to build fibrillar structures with a nanoscale control of film thickness, which would be useful for in vivo applications such as inner lining of lumens for vascular and tracheal implants.

Reactive layer-by-layer deposition of poly(ethylene imine) and a precursor of TiO2: influence of the sodium chloride concentration on the film growth, interaction with hexacyanoferrate anions, and particle distribution in the film.

Films prepared according to a layer-by-layer (LBL) manner find increasing importance in many applications such as coatings with dedicated optical or electronic properties, particularly when including nanomaterials. An alternative way to prepare such hybrid layer-by-layer coatings is to perform sol-gel chemistry in a layer-by-layer manner. In this article, we highlight the importance of the NaCl concentration as a parameter to control the growth as well as the properties of LBL films made from poly(ethylene imine) as the organic counterpart and titanium IV (bisammoniumlactato)dihydroxyde ([Ti(lac)(2)(OH)(2)](2-)) as the precursor of TiO(2). An increase in the sodium chloride concentration leads to the faster growth of the film and to a decrease in the number of hexacyanoferrate anions remaining in the film after a buffer rinse. This may be due to a progressive increase in the fraction of negatively charged TiO(2) as suggested by transmission electron microscopy. In the presence of 0.5 M NaCl, the fraction of TiO(2) is close to 60% in mass. As a surprising finding, the films produced from 0.15 M NaCl are not homogeneously filled with TiO(2) even if the film is produced in an LBL fashion. The increased concentration of TiO(2) at the film-solution interface could constitute a barrier for the incorporation of the negatively charged redox probe.

Protein adsorption on dopamine-melanin films: role of electrostatic interactions inferred from zeta-potential measurements versus chemisorption.

We recently showed the possibility to build dopamine-melanin films of controlled thickness by successive immersions of a substrate in alkaline solutions of dopamine [F. Bernsmann, A. Ponche, C. Ringwald, J. Hemmerlé, J. Raya, B. Bechinger, J.-C. Voegel, P. Schaaf, V. Ball, J. Phys. Chem. C 113 (2009) 8234-8242]. In this work the structure and properties of such films are further explored. The zeta-potential of dopamine-melanin films is measured as a function of the total immersion time to build the film. It appears that the film bears a constant zeta-potential of (-39+/-3) mV after 12 immersion steps. These data are used to calculate the surface density of charged groups of the dopamine-melanin films at pH 8.5 that are mostly catechol or quinone imine chemical groups. Furthermore the zeta-potential is used to explain the adsorption of three model proteins (lysozyme, myoglobin, alpha-lactalbumin), which is monitored by quartz crystal microbalance. We come to the conclusion that protein adsorption on dopamine-melanin is not only determined by possible covalent binding between amino groups of the proteins and catechol groups of dopamine-melanin but that electrostatic interactions contribute to protein binding. Part of the adsorbed proteins can be desorbed by sodium dodecylsulfate solutions at the critical micellar concentration. The fraction of weakly bound proteins decreases with their isoelectric point. Additionally the number of available sites for covalent binding of amino groups on melanin grains is quantified.