Fate of telomere entanglements is dictated by the timing of anaphase midregion nuclear envelope breakdown.

Persisting replication intermediates can confer mitotic catastrophe. Loss of the fission yeast telomere protein Taz1 (ortholog of mammalian TRF1/TRF2) causes telomeric replication fork (RF) stalling and consequently, telomere entanglements that stretch between segregating mitotic chromosomes. At ≤20 °C, these entanglements fail to resolve, resulting in lethality. Rif1, a conserved DNA replication/repair protein, hinders the resolution of telomere entanglements without affecting their formation. At mitosis, local nuclear envelope (NE) breakdown occurs in the cell's midregion. Here we demonstrate that entanglement resolution occurs in the cytoplasm following this NE breakdown. However, in response to taz1Δ telomeric entanglements, Rif1 delays midregion NE breakdown at ≤20 °C, in turn disfavoring entanglement resolution. Moreover, Rif1 overexpression in an otherwise wild-type setting causes cold-specific NE defects and lethality, which are rescued by membrane fluidization. Hence, NE properties confer the cold-specificity of taz1Δ lethality, which stems from postponement of NE breakdown. We propose that such postponement promotes clearance of simple stalled RFs, but resolution of complex entanglements (involving strand invasion between nonsister telomeres) requires rapid exposure to the cytoplasm.

Synergizing Nanomaterials and Artificial Intelligence in Advanced Optical Biosensors for Precision Antimicrobial Resistance Diagnosis.

Antimicrobial resistance (AMR) poses a critical global One Health concern, ensuing from unintentional and continuous exposure to antibiotics, as well as challenges in accurate contagion diagnostics. Addressing AMR requires a strategic approach that emphasizes early stage prevention through screening in clinical, environmental, farming, and livestock settings to identify nonvulnerable antimicrobial agents and the associated genes. Conventional AMR diagnostics, like antibiotic susceptibility testing, possess drawbacks, including high costs, time-consuming processes, and significant manpower requirements, underscoring the need for intelligent, prompt, and on-site diagnostic techniques. Nanoenabled artificial intelligence (AI)-supported smart optical biosensors present a potential solution by facilitating rapid point-of-care AMR detection with real-time, sensitive, and portable capabilities. This Review comprehensively explores various types of optical nanobiosensors, such as surface plasmon resonance sensors, whispering-gallery mode sensors, optical coherence tomography, interference reflection imaging sensors, surface-enhanced Raman spectroscopy, fluorescence spectroscopy, microring resonance sensors, and optical tweezer biosensors, for AMR diagnostics. By harnessing the unique advantages of these nanoenabled smart biosensors, a revolutionary paradigm shift in AMR diagnostics can be achieved, characterized by rapid results, high sensitivity, portability, and integration with Internet-of-Things (IoT) technologies. Moreover, nanoenabled optical biosensors enable personalized monitoring and on-site detection, significantly reducing turnaround time and eliminating the human resources needed for sample preservation and transportation. Their potential for holistic environmental surveillance further enhances monitoring capabilities in diverse settings, leading to improved modern-age healthcare practices and more effective management of antimicrobial treatments. Embracing these advanced diagnostic tools promises to bolster global healthcare capacity to combat AMR and safeguard One Health.

Wild edible Ficus fruits of Uttarakhand, India: a natural remedy towards malnutrition and human health enrichment.

Wild fruits play a vital role in the diets and economic well-being of tribal communities of Uttarakhand, India. Despite their significance, there is limited information on some of the wild Ficus species such as Ficus drupacea, Ficus rumphii, Ficus semicordata, Ficus subincisa and Ficus hispida. This research aimed to analyse the nutritional potential, anti-nutritional compositions, mineral composition, antioxidant and finally the phytochemical properties of Ficus fruits to ascertain their medicinal and nutritional significance. The proximate analysis results of all the five wild Ficus species displayed varying percentages of protein, moisture, fat, ash, crude fibre, carbohydrates. Ficus species exhibited superior nutritional and mineral parameters along with a significant amount of vitamin C. Additionally, these fruits significantly showed lower levels of anti-nutritional and good amount of antioxidant parameters. Thus, adequate consumption of these wild Ficus fruits could potentially contribute to human nutritional needs and may serve as sources for dietary enhancements.

Impact of oral health preventive program using specialized audio and tactile aids in visually impaired school children. A cross-sectional study.

BACKGROUND: The maintenance of oral hygiene and subsequent health related issues in visually handicapped children is a challenging task. Hence, tools must be used to ensure good oral health in these children. The study aimed to analyze the effectiveness of preventive programs on oral health using specialized audio and tactile aids in visually impaired school children. MATERIALS AND METHODS: 100 visually handicapped children were selected for the study. They were divided into two groups: Group A (Training using Braille) and Group B (training by means of audio aids). Children were trained using appropriate tools and oral health was assessed using Plaque and Gingival bleeding indices. STATISTICAL ANALYSIS: Independent 'T-test' was used for comparing mean ± SD values. RESULTS: Statistically significant improvements in both plaque and gingival bleeding indices were obtained on follow-up observations at 3rd and 6th months. CONCLUSION: The use of specialized tactile and audio tools significantly improved the oral health status of visually impaired school children.

Parallel genetic screens identify nuclear envelope homeostasis as a key determinant of telomere entanglement resolution in fission yeast.

In fission yeast lacking the telomere binding protein, Taz1, replication forks stall at telomeres, triggering deleterious downstream events. Strand invasion from one taz1Δ telomeric stalled fork to another on a separate (nonsister) chromosome leads to telomere entanglements, which are resolved in mitosis at 32°C; however, entanglement resolution fails at ≤20°C, leading to cold-specific lethality. Previously, we found that loss of the mitotic function of Rif1, a conserved DNA replication and repair factor, suppresses cold sensitivity by promoting resolution of entanglements without affecting entanglement formation. To understand the underlying pathways of mitotic entanglement resolution, we performed a series of genome-wide synthetic genetic array screens to generate a comprehensive list of genetic interactors of taz1Δ and rif1Δ. We modified a previously described screening method to ensure that the queried cells were kept in log phase growth. In addition to recapitulating previously identified genetic interactions, we find that loss of genes encoding components of the nuclear pore complex (NPC) promotes telomere disentanglement and suppresses taz1Δ cold sensitivity. We attribute this to more rapid anaphase midregion nuclear envelope (NE) breakdown in the absence of these NPC components. Loss of genes involved in lipid metabolism reverses the ability of rif1+ deletion to suppress taz1Δ cold sensitivity, again pinpointing NE modulation. A rif1+ separation-of-function mutant that specifically loses Rif1's mitotic functions yields similar genetic interactions. Genes promoting membrane fluidity were enriched in a parallel taz1+ synthetic lethal screen at permissive temperature, cementing the idea that the cold specificity of taz1Δ lethality stems from altered NE homeostasis.

Arabidopsis BECLIN1-induced autophagy mediates reprogramming in tapetal programmed cell death by altering the gross cellular homeostasis.

In flowering plants, the tapetum degeneration in post-meiotic anther occurs through developmental programmed cell death (dPCD), which is one of the most critical and sensitive steps for the proper development of male gametophytes and fertility. Yet the pathways of dPCD, its regulation, and its interaction with autophagy remain elusive. Here, we report that high-level expression of Arabidopsis autophagy-related gene BECLIN1 (BECN1 or AtATG6) in the tobacco tapetum prior to their dPCD resulted in developmental defects. BECN1 induces severe autophagy and multiple cytoplasm-to-vacuole pathways, which alters tapetal cell reactive oxygen species (ROS)-homeostasis that represses the tapetal dPCD. The transcriptome analysis reveals that BECN1- expression caused major changes in the pathway, resulting in altered cellular homeostasis in the tapetal cell. Moreover, BECN1-mediated autophagy reprograms the execution of tapetal PCD by altering the expression of the key developmental PCD marker genes: SCPL48, CEP1, DMP4, BFN1, MC9, EXI1, and Bcl-2 member BAG5, and BAG6. This study demonstrates that BECN1-mediated autophagy is inhibitory to the dPCD of the tapetum, but the severity of autophagy leads to autophagic death in the later stages. The delayed and altered mode of tapetal degeneration resulted in male sterility.

Cryo-EM structure of wheat ribosome reveals unique features of the plant ribosomes.

Plants being sessile organisms exhibit unique features in ribosomes, which might aid in rapid gene expression and regulation in response to varying environmental conditions. Here, we present high-resolution structures of the 60S and 80S ribosomes from wheat, a monocot staple crop plant (Triticum aestivum). While plant ribosomes have unique plant-specific rRNA modification (Cm1847) in the peptide exit tunnel (PET), the zinc-finger motif in eL34 is absent, and uL4 is extended, making an exclusive interaction network. We note differences in the eL15-helix 11 (25S) interaction, eL6-ES7 assembly, and certain rRNA chemical modifications between monocot and dicot ribosomes. In eukaryotes, we observe highly conserved rRNA modification (Gm75) in 5.8S rRNA and a flipped base (G1506) in PET. These features are likely involved in sensing or stabilizing nascent chain. Finally, we discuss the importance of the universal conservation of three consecutive rRNA modifications in all ribosomes for their interaction with A-site aminoacyl-tRNA.

Lipidomic Profiling and Pharmacological Activities of Ficus drupacea Oil: Comparative Study Between Conventional vs. Green Solvent.

Ficus drupacea is a medicinal tree found in temperate regions. Various parts of this plant had been used traditionally for the treatment of various ailments such as root powder applied externally for skin infections. Analysis was carried out on the bioactive lipids extracted from Ficus drupacea fruit using both petroleum-based solvent (Hexane) and an environmentally friendly solvent Dimethyl carbonate (DMC). The results showed that DMC extraction yielded a high oil content in Ficus drupacea fruit (6.51 %). When examining the fatty acid composition using GC-FID analysis, Ficus drupacea oil extracted with DMC contained significant proportions of essential fatty acids such as linoleic acid (32.317 %), oleic acid (20.946 %), palmitic acid (25.841 %), etc. Additionally, DMC extraction resulted in higher levels of total phenolics in Ficus drupacea fruit oil compared to hexane. Moreover, DMC extracted oil exhibited stronger antioxidant properties, such as radical scavenging, anti- arthritic, photoprotective activity while displayed similar anti-inflammatory and anti-microbial activity as hexane-extracted oil. In summary, these findings demonstrate that DMC is an efficient and safer alternative to conventional solvent hexane for extracting oils from Ficus drupacea fruit. It is rich in bioactive compounds essential for human nutrition, including polyunsaturated fatty acids, flavonoids, and phenolic compounds, with enhanced biological activities.

Nanotechnology-based theranostic and prophylactic approaches against SARS-CoV-2.

SARS-CoV-2 (COVID-19) pandemic has been an unpredicted burden on global healthcare system by infecting over 700 million individuals, with approximately 6 million deaths worldwide. COVID-19 significantly impacted all sectors, but it very adversely affected the healthcare system. These effects were much more evident in the resource limited part of the world. Individuals with acute conditions were also severely impacted. Although classical COVID-19 diagnostics such as RT-PCR and rapid antibody testing have played a crucial role in reducing the spread of infection, these diagnostic techniques are associated with certain limitations. For instance, drawback of RT-PCR diagnostics is that due to degradation of viral RNA during shipping, it can give false negative results. Also, rapid antibody testing majorly depends on the phase of infection and cannot be performed on immune compromised individuals. These limitations in current diagnostic tools require the development of nanodiagnostic tools for early detection of COVID-19 infection. Therefore, the SARS-CoV-2 outbreak has necessitated the development of specific, responsive, accurate, rapid, low-cost, and simple-to-use diagnostic tools at point of care. In recent years, early detection has been a challenge for several health diseases that require prompt attention and treatment. Disease identification at an early stage, increased imaging of inner health issues, and ease of diagnostic processes have all been established using a new discipline of laboratory medicine called nanodiagnostics, even before symptoms have appeared. Nanodiagnostics refers to the application of nanoparticles (material with size equal to or less than 100 nm) for medical diagnostic purposes. The special property of nanomaterials compared to their macroscopic counterparts is a lesser signal loss and an enhanced electromagnetic field. Nanosize of the detection material also enhances its sensitivity and increases the signal to noise ratio. Microchips, nanorobots, biosensors, nanoidentification of single-celled structures, and microelectromechanical systems are some of the most modern nanodiagnostics technologies now in development. Here, we have highlighted the important roles of nanotechnology in healthcare sector, with a detailed focus on the management of the COVID-19 pandemic. We outline the different types of nanotechnology-based diagnostic devices for SARS-CoV-2 and the possible applications of nanomaterials in COVID-19 treatment. We also discuss the utility of nanomaterials in formulating preventive strategies against SARS-CoV-2 including their use in manufacture of protective equipment, formulation of vaccines, and strategies for directly hindering viral infection. We further discuss the factors hindering the large-scale accessibility of nanotechnology-based healthcare applications and suggestions for overcoming them.

Functional analysis of the AUG initiator codon context reveals novel conserved sequences that disfavor mRNA translation in eukaryotes.

mRNA translation is a fundamental process for life. Selection of the translation initiation site (TIS) is crucial, as it establishes the correct open reading frame for mRNA decoding. Studies in vertebrate mRNAs discovered that a purine at -3 and a G at +4 (where A of the AUG initiator codon is numbered + 1), promote TIS recognition. However, the TIS context in other eukaryotes has been poorly experimentally analyzed. We analyzed in vitro the influence of the -3, -2, -1 and + 4 positions of the TIS context in rabbit, Drosophila, wheat, and yeast. We observed that -3A conferred the best translational efficiency across these species. However, we found variability at the + 4 position for optimal translation. In addition, the Kozak motif that was defined from mammalian cells was only weakly predictive for wheat and essentially non-predictive for yeast. We discovered eight conserved sequences that significantly disfavored translation. Due to the big differences in translational efficiency observed among weak TIS context sequences, we define a novel category that we termed 'barren AUG context sequences (BACS)', which represent sequences disfavoring translation. Analysis of mRNA-ribosomal complexes structures provided insights into the function of BACS. The gene ontology of the BACS-containing mRNAs is presented.

Initiation factor 3 bound to the 30S ribosomal subunit in an initial step of translation.

Bacterial ribosomes require three initiation factors IF1, IF2, and IF3 during the initial steps of translation. These IFs ensure correct base pairing of the initiator tRNA anticodon with the start codon in the mRNA located at the P-site of the 30S ribosomal subunit. IF3 is one of the first IFs to bind to the 30S and plays a crucial role in the selection of the correct start codon and codon: anticodon base pairing. IF3 also prevents the premature association of the 50S subunit of ribosomes and aids in ribosome recycling. IF3 is reported to change binding sites and conformation to ensure translation initiation fidelity. A recent study suggested an initial binding of IF3 CTD away from the P-site and that IF1 and IF2 promote the movement of CTD to the P-site and concomitant movement of NTD. Hence, to visualize the position of IF3 in the absence of any other IFs, we determined cryo-EM structure of the 30S-IF3 complex. The map shows that IF3 is present in an extended conformation with CTD present at the P-site and NTD near the platform even in the absence of IF1 and IF2. Hence, IF3 CTD binds at the P-site and moves away during the accommodation of the initiator tRNA at the P-site in the later steps of translation initiation. Overall, we report the structure of 30S-IF3 which demystifies the starting binding site and conformation of IF3 on the 30S ribosomal subunit.

Bimatoprost-loaded lipidic nanoformulation development using quality by design: liposomes versus solid lipid nanoparticles in intraocular pressure reduction.

Background: Bimatoprost is a drug used to lower intraocular pressure in the treatment of glaucoma. Conventional eye drops have the limitations of repeated dosing, drug loss due to tear outflow and hence poor availability for action. Materials & methods: Using a systematic quality by design approach, liposomes and solid lipid nanoparticles were formulated and further encapsulated in thermo-sensitive in situ hydrogel. Results & conclusion: Optimized liposomes had 87.04% encapsulation efficiency and 306.78 nm mean particle size, while solid lipid nanoparticles had 90.51% and 304.21 nm. Bimatoprost liposomes had controlled zero-order drug kinetics and no initial burst release, making them better than solid lipid nanoparticles. Bimatoprost-loaded liposomes in thermo-sensitive hydrogel decreased intraocular pressure for 18 h.

CaMKK2 and CHK1 phosphorylate human STN1 in response to replication stress to protect stalled forks from aberrant resection.

Keeping replication fork stable is essential for safeguarding genome integrity; hence, its protection is highly regulated. The CTC1-STN1-TEN1 (CST) complex protects stalled forks from aberrant MRE11-mediated nascent strand DNA degradation (NSD). However, the activation mechanism for CST at forks is unknown. Here, we report that STN1 is phosphorylated in its intrinsic disordered region. Loss of STN1 phosphorylation reduces the replication stress-induced STN1 localization to stalled forks, elevates NSD, increases MRE11 access to stalled forks, and decreases RAD51 localization at forks, leading to increased genome instability under perturbed DNA replication condition. STN1 is phosphorylated by both the ATR-CHK1 and the calcium-sensing kinase CaMKK2 in response to hydroxyurea/aphidicolin treatment or elevated cytosolic calcium concentration. Cancer-associated STN1 variants impair STN1 phosphorylation, conferring inability of fork protection. Collectively, our study uncovers that CaMKK2 and ATR-CHK1 target STN1 to enable its fork protective function, and suggests an important role of STN1 phosphorylation in cancer development.

Modified Impedance Sensing System Determination of Virulence Characteristics of Pathogenic Bacteria Klebsiella Species.

An impedance sensing system is a family of biosensors that measure changes in electrical impedance to perform their functions. Physical and chemical changes in the impedance of the sensing element, such as changes in the concentration of a target analyte or changes in the physical properties of the sensing element, can result in changes in the impedance of the sensing element. Many impedance biosensors have been developed for the detection of pathogens in the past few decades. Several types of biosensors have been developed for the detection of infections, including transduction elements, biorecognition components, and electrochemical approaches. In this review, we discuss the characteristics and pathogenic factors associated with 2,3-butanediol-producing Klebsiella pneumoniae collected using impedance sensors. An impedance sensing system was introduced as a great method for monitoring the virulence factors of Klebsiella spp. in situ. Klebsiella pneumoniae produces virulence factors, including capsules, lipopolysaccharides, fimbriae, and siderophores, as part of its pathogenesis. It is possible to examine virulence factors' pathogenic characteristics in vitro and in vivo using real tissues or mouse models in order to conduct experiments. For the monitoring of virulence factors in situ, a novel alternative method has been developed to mimic the environment of real tissues. For the purpose of developing tissue-mimicking models, mucin and mannose were used to modify the surface of gold electrodes. These components are known to contribute to the adhesion of pathogens to epithelial cells in mammals.

Cancer treatment and toxicity outlook of nanoparticles.

Diversified nanosystems with tunable physicochemical attributes have emerged as potential solution to globally devastating cancer by offering novel possibilities for improving the techniques of cancer detection, imaging, therapies, diagnosis, drug delivery and treatment. Drug delivery systems based on nanoparticles (NPs) with ability of crossing different biological barriers are becoming increasingly popular. Besides, NPs are utilized in pharmaceutical sciences to mitigate the toxicity of conventional cancer therapeutics. However, significant NPs-associated toxicity, off-targeted activities, and low biocompatibility limit their utilization for cancer theranostics and can be hazardous to cancer patients up to life-threatening conditions. NPs interact with the biomolecules and disturb their regular function by aggregating inside cells and forming a protein corona, and the formulation turns ineffective in controlling cancer cell growth. The adverse interactions between NPs and biological entities can lead to life-threatening toxicities. This review focuses on the widespread use of various NPs including zinc oxide, titanium oxide, silver, and gold, which serve as efficient nano-vehicles and demonstrate notable pharmacokinetic and pharmacodynamic advantages in cancer therapy. Subsequently, the mechanism of nanotoxicity attached with these NPs, alternate solutions and their prospect to revolutionize cancer theranostics are highlighted. This review will serve as guide for future developments associated with high-performance NPs with controlled toxicity for establishing them as modern-age nanotools to manage cancer in tailored manner.

Contribution of Medical Education through Role Playing in Community Health Promotion: A Review.

Background: Didactic lecture is most commonly used method to teach medical students in Family and Community Medicine. However, considering its demerits and the need to integrate theoretical knowledge into practice, the objective of this paper is to review the contribution of role play in medical education and to propose it's applications to deliver healthcare services in community more effectively. Methods: Research studies on role play were searched in PubMed, Google scholar, Google using terms role play, medical education, community medicine, family medicine, health promotion, awareness during the period between January 2000 up to December 2021 to evaluate the potential and contribution of role play in medical education and health promotion. Results: Review of role play and related researches were included to analyze the outcome. The outcomes of different studies analyzed were showing several teaching methodologies used in medical field. Several studies have tested role play in other medical specialities and have found it to be a powerful educational tool. However, not many studies have tested its effectiveness to educate students in Family and Community Medicine although it could have immense practical applications like demonstrating and creating awareness in the community about the importance of cancer screening, breast feeding, immunisation, food fortification, genetic screening, premarital counselling, ante natal checkups, danger signs in pregnancy. Conclusion: Role play simulates real scenarios enabling students to apply their skills and knowledge into practice in real time. It can integrate theory concepts into practice. Hence, it must be introduced in medical curriculum to achieve the objectives of teaching and learning more effectively.

Analysing role of airborne particulate matter in abetting SARS-CoV-2 outbreak for scheming regional pandemic regulatory modalities.

The mutating SARS-CoV-2 necessitates gauging the role of airborne particulate matter in the COVID-19 outbreak for designing area-specific regulation modalities based on the environmental state-of-affair. To scheme the protocols, the hotspots of air pollutants such as PM2.5, PM10, NH3, NO, NO2, SO2, and and environmental factors including relative humidity (RH), and temperature, along with COVID-19 cases and mortality from January 2020 till December 2020 from 29 different ground monitoring stations spanning Delhi, are mapped. Spearman correlation coefficients show a positive relationship between SARS-COV-2 with particulate matter (PM2.5 with r > 0.36 and PM10 with r > 0.31 and p-value <0·001). Besides, SARS-COV-2 transmission showed a substantial correlation with NH3 (r = 0.41), NO2 (r = 0.36), and NO (r = 0.35) with a p-value <0.001, which is highly indicative of their role in SARS-CoV-2 transmission. These outcomes are associated with the source of PM and its constituent trace elements to understand their overtone with COVID-19. This strongly validates temporal and spatial variation in COVID-19 dependence on air pollutants as well as on environmental factors. Besides, the bottlenecks of missing latent data, monotonous dependence of variables, and the role air pollutants with secondary environmental variables are discussed. The analysis set the foundation for strategizing regional-based modalities considering environmental variables (i.e., pollutant concentration, relative humidity, temperature) as well as urban and transportation planning for efficient control and handling of future public health emergencies.

Deficiency in mammalian STN1 promotes colon cancer development via inhibiting DNA repair.

Despite the high lethality of colorectal cancers (CRCs), only a limited number of genetic risk factors are identified. The mammalian ssDNA-binding protein complex CTC1-STN1-TEN1 protects genome stability, yet its role in tumorigenesis is unknown. Here, we show that attenuated CTC1/STN1 expression is common in CRCs. We generated an inducible STN1 knockout mouse model and found that STN1 deficiency in young adult mice increased CRC incidence, tumor size, and tumor load. CRC tumors exhibited enhanced proliferation, reduced apoptosis, and elevated DNA damage and replication stress. We found that STN1 deficiency down-regulated multiple DNA glycosylases, resulting in defective base excision repair (BER) and accumulation of oxidative damage. Collectively, this study identifies STN1 deficiency as a risk factor for CRC and implicates the previously unknown STN1-BER axis in protecting colon tissues from oxidative damage, therefore providing insights into the CRC tumor-suppressing mechanism.

Effect of surface termination on electronic and optical properties of lead-free tin-based eco-friendly perovskite solar cell: a first principal study.

The lead (Pb)-based halide perovskites have been reported to be promising materials for photovoltaic applications; however, the presence of toxic lead in them concerns the environmental and health issues. In this work, we have, therefore, studied the lead-free and non-toxic tin-based halide perovskite, CsSnI3, which is an eco-friendly material with high power conversion efficiency, thus, being a potential candidate for photovoltaic applications. We have investigated the influence of CsI and SnI2-terminated (001) surfaces on structural, electronic and optical properties of lead-free tin-based halide perovskite CsSnI3 from the first principal calculations, based on density functional theory (DFT). The calculations of electronic and optical parameters are performed under the parameterisation of PBE_Sol for exchange-correlation functions conjugated with modified- Beche-Johnshon (mBJ) exchange potential. The optimised lattice constant, the energy band structure and the density of states (DOS) have been calculated for the bulk and different terminated surface structures. The optical properties of CsSnI3 are computed in terms of the real and imaginary part of absorption coefficient, dielectric function, refractive index, conductivity, reflectivity, extinction coefficient and electron energy loss. The photovoltaic characteristics for the CsI-termination are found to be better than the bulk and SnI2-terminated surfaces. This study reveals that optical and electronic properties can be tuned by selecting proper surface termination in halide perovskite CsSnI3. The CsSnI3 surfaces exhibit semiconductor behaviour with a direct energy band gap and a high value of absorption power in the ultraviolet and visible region, rendering these inorganic halide perovskite materials important for the eco-friendly and efficient optoelectronic devices.