High-Temperature Polylactic Acid Proves Reliable and Safe for Manufacturing 3D-Printed Patient-Specific Instruments in Pediatric Orthopedics-Results from over 80 Personalized Devices Employed in 47 Surgeries.

(1) Background: Orthopedic surgery has been transformed by 3D-printed personalized instruments (3DP-PSIs), which enhance precision and reduce complications. Hospitals are adopting in-house 3D printing facilities, using cost-effective methods like Fused Deposition Modeling (FDM) with materials like Polylactic acid (PLA) to create 3DP-PSI. PLA's temperature limitations can be overcome by annealing High-Temperature PLA (ann-HTPLA), enabling steam sterilization without compromising properties. Our study examines the in vivo efficacy of ann-HTPLA 3DP-PSI in pediatric orthopedic surgery. (2) Methods: we investigated safety and efficacy using ann-HTPLA 3DP-PSI produced at an "in-office" 3D-printing Point-of-Care (3DP-PoC) aimed at correcting limb deformities in pediatric patients. Data on 3DP-PSI dimensions and printing parameters were collected, along with usability and complications. (3) Results: Eighty-three ann-HTPLA 3DP-PSIs were utilized in 33 patients (47 bone segments). The smallest guide used measured 3.8 cm3, and the largest measured 58.8 cm3. Seventy-nine PSIs (95.2%; 95% C.I.: 88.1-98.7%) demonstrated effective use without issues. Out of 47 procedures, 11 had complications, including 2 infections (4.3%; 95% CI: 0.5-14.5%). Intraoperative use of 3DP-PSIs did not significantly increase infection rates or other complications. (4) Conclusions: ann-HTPLA has proven satisfactory usability and safety as a suitable material for producing 3DP-PSI in an "in-office" 3DP-PoC.

Health-related quality of life and associated risk factors in patients with Multiple Osteochondromas: a cross-sectional study.

PURPOSE: To evaluate the health-related quality of life and associated risk factors for Multiple Osteochondromas patients. METHODS: A cross-sectional, observational study was conducted from May to December 2022 during the routine visit to the referral center for rare skeletal disorders. All patients with Multiple Osteochondromas aged ≥ 3 years were included. EuroQol 5-dimension questionnaires, and demographic, clinical, and surgical history data were collected. Descriptive statistics, Fisher's exact test, One-sample t-test, Spearman's correlation, and multiple linear and logistic regression were performed to analyze the data. Results are reported following STROBE guidelines. RESULTS: A total of 128 patients were included in the study, with a mean age of 14 [SD, 10] years. The mean EQ-5D Index Value was 0.863 [SD, 0.200] and the EQ-VAS was 84 [SD, 19] with a positive correlation between two scores [r = 0.541, p < 0.001]. Patients frequently referred problems in pain/discomfort [78.8%], anxiety/depression [50%], and usual activities [38.8%] dimensions. Increasing age was the common risk factor for health-related quality of life [p < 0.000], as well as Index Value and VAS scores were significantly lower in surgical patients [p = 0.001 and p < 0.001, respectively]. CONCLUSION: Increasing age and surgical procedures were found highly associated with reduced health-related quality of life in Multiple Osteochondromas patients. Our findings provide relevant information to support the establishment of patient-centered healthcare pathways and pave the way for further research into medical and non-medical therapeutic strategies for these patients.

Virtual Surgical Planning and Patient-Specific Instruments for Correcting Lower Limb Deformities in Pediatric Patients: Preliminary Results from the In-Office 3D Printing Point of Care.

(1) Background: Virtual reality and 3D printing are transforming orthopedic surgery by enabling personalized three-dimensional (3D) models for surgical planning and Patient-Specific Instruments (PSIs). Hospitals are establishing in-house 3D printing centers to reduce costs and improve patient care. Pediatric orthopedic surgery also benefits from these technologies, enhancing the precision and personalization of treatments. This study presents preliminary results of an In-Office 3D Printing Point of Care (PoC), outlining considerations and challenges in using this program for treating lower limb deformities in pediatric patients through Virtual Surgical Planning (VSP) and 3D-printed Patient-Specific Instruments (PSIs). (2) Materials and Methods: Pediatric patients with congenital or acquired lower limb deformities undergoing surgical correction based on VSP, incorporating 3D-printed PSIs when required, were included in this study. The entire process of VSP and 3D printing at the In-Office PoC was illustrated. Data about deformity characteristics, surgical procedures, and outcomes, including the accuracy of angular correction, surgical times, and complications, were reported. (3) Results: In total, 39 bone correction procedures in 29 patients with a mean age of 11.6 ± 4.7 years (range 3.1-18.5 years) were performed according to VSP. Among them, 23 procedures were accomplished with PSIs. Surgeries with PSIs were 45 min shorter, with fewer fluoroscopy shots. Optimal correction was achieved in 37% of procedures, while the remaining cases showed under-corrections (41%) or over-corrections (22%). Major complications were observed in four patients (13.8%). (4) Conclusions: The In-Office 3D Printing Point of Care is becoming an essential tool for planning and executing complex corrections of lower limb deformities, but additional research is needed for optimizing the prediction and accuracy of the achieved corrections.

Side-to-Side Flipping Wedge Osteotomy: Virtual Surgical Planning Suggested an Innovative One-Stage Procedure for Aligning Both Knees in "Windswept Deformity".

(1) Background: The adoption of Virtual Surgical Planning (VSP) and 3D technologies is rapidly growing within the field of orthopedic surgery, opening the door to highly innovative and individually tailored surgical techniques. We present an innovative correction approach successfully used in a child affected by "windswept deformity" of the knees. (2) Methods: We report a case involving a child diagnosed with "windswept deformity" of the knees. This condition was successfully addressed through a one-stage bilateral osteotomy of the distal femur. Notably, the wedge removed from the valgus side was flipped and employed on the varus side to achieve the correction of both knees simultaneously. The surgical technique was entirely conceptualized, simulated, and planned in a virtual environment. Customized cutting guides and bony models were produced at an in-hospital 3D printing point of care and used during the operation. (3) Results: The surgery was carried out according to the VSP, resulting in favorable outcomes. We achieved good corrections of the angular deformity with an absolute difference from the planned correction of 2° on the right side and 1° on the left side. Moreover, this precision not only improved surgical outcomes but also reduced the procedure's duration and overall cost, highlighting the efficiency of our approach. (4) Conclusions: The integration of VSP and 3D printing into the surgical treatment of rare limb anomalies not only deepens our understanding of these deformities but also opens the door to the development of innovative, personalized, and adaptable approaches for addressing these unique conditions.

Is the High Healing Index a Complication of Progressive Long Bone Lengthening? Observations from a Cohort of 178 Children Treated with Circular External Fixation for Lower Limb Length Discrepancy.

The use of external fixators (EFs) for lower limb lengthening is common for treating lower limb length discrepancy (LLD) in children. The concern at present revolves around extended treatment times, with some suggesting a healing index (HI) > 45 days/cm as a major complication. The aim of this study is to assess the factors affecting bone healing and treatment duration in children who undergo limb lengthening for LLD using circular EFs. A total of 240 lengthening procedures on 178 children affected by congenital or acquired LLDs (mean age at surgery 13.8 ± 2.8 years) were retrospectively evaluated. Complications according to Lascombes' classification and treatment duration factors were analyzed. Mean HI was 57 ± 25 days/cm for the femur and 55 ± 24 days/cm for the tibia, with an HI > 45 days/cm in 64% of the procedures. A total of 189 procedures (79%) reported complications; 85 had an HI > 45 days/cm as the sole complication. While reducing the frame time is crucial, revising the classifications is necessary to avoid the overestimation of complications.

Recurrence and Complication Rates of Surgical Treatment for Blount's Disease in Children: A Systematic Review and Meta-Analysis.

BACKGROUND: Blount's disease is a growth disorder of the proximal tibia that causes progressive genu varum in children. Surgical treatment is recommended if the deformity worsens, but which intervention is best remains controversial. This study aims to identify factors influencing outcomes and determine the most effective surgical approach. METHODS: A systematic review was conducted of studies published before January 2022. RESULTS: In total, 63 retrospective studies with CEBM IIIb/IV levels were included (1672 knees in 1234 patients). The most commonly reported treatment was acute correction via osteotomy (47%), followed by hemiepiphysiodesis (22%) and gradual correction (18%). Combined procedures were reported in 13% of cases. The overall recurrence rate was 18%, with a significant difference when comparing the recurrence rates after gradual correction with those after hemiepiphysiodesis (7% and 29%, respectively). Major complications beyond recurrence were observed in 5% of cases. A meta-analysis of the available raw data showed a significantly increased recurrence rate (39%) among treated children who were between 4.5 and 11.25 years of age and were followed for a minimum follow-up of 2.5 years. CONCLUSIONS: Overall, poor evidence with which to establish an optimal treatment for Blount's disease was found. This study remarked on the need for early diagnosis, classification, and treatment of infantile tibia vara, since a significant rate of recurrence was found in neglected cases.

Subtalar arthroereisis post-operative management in children: A literature review.

PURPOSE: Subtalar arthroereisis is a minimally-invasive technique for the treatment of flexible flatfoot. Some issues regarding the procedure are still debated, such as post-operative management. The aim of this study is to offer a review of the pertaining literature to identify current post-operative protocols and describe possible differences among them. METHODS: We searched the PubMed database for all papers related to subtalar arthroereisis in children specifying the post-operative protocols. After reviewing all studies according to excluding criteria, 50 articles were selected for analysis. RESULTS: Based on the literature review, different post-operative protocols emerged in the treatment of patients undergoing subtalar arthroereisis, in particular regarding length of hospital stay, type and duration of immobilization, weight-bearing management, adopted rehabilitation scheme, sport resumption and implant removal. CONCLUSIONS: The most important finding was the existence of a wide variety in post-operative management after subtalar arthroereisis in children, thus confirming that no clear consensus still exists in this field.

The Flipping-Wedge Osteotomy: How 3D Virtual Surgical Planning (VSP) Suggested a Simple and Promising Type of Osteotomy in Pediatric Post-Traumatic Forearm Deformity.

(1) Background: The application of computer-aided planning in the surgical treatment of post-traumatic forearm deformities has been increasingly widening the range of techniques over the last two decades. We present the "flipping-wedge osteotomy", a promising geometrical approach to correct uniapical deformities defined during our experience with virtual surgical planning (VSP); (2) Methods: a case of post-traumatic distal radius deformity (magnitude 43°) treated with a flipping-wedge osteotomy in an 11-year-old girl is reported, presenting the planning rationale, its geometrical demonstration, and the outcome of the procedure; (3) Results: surgery achieved correction of both the angular and rotational deformities with a neutral ulnar variance; (4) Conclusions: flipping-wedge osteotomy may be a viable option to achieve correction in forearm deformities, and it deserves further clinical investigation.

A 20-Year Retrospective Study of Children and Adolescents Treated by the Three-in-One Procedure for Patellar Realignment.

BACKGROUND: Patellar instability is the most common disorder of the knee during childhood and adolescence. Surgical treatment significantly reduces the rate of redislocation, but the underlying pathologies and pattern of instability may affect the results. We aimed to report the clinical and functional outcomes of the three-in-one procedure for patellar realignment in a cohort of skeletally immature patients with or without syndromes and various patterns of chronic patellar instability. METHODS: We retrospectively investigated 126 skeletally immature patients (168 knees) affected by idiopathic or syndromic patellar instability, who underwent patella realignment through a three-in-one procedure. We classified the instability according to the score proposed by Parikh and Lykissas. RESULTS: Patellar dislocation was idiopathic in 71 patients (94 knees; 56.0%) and syndromic in 55 (74 knees; 44.0%). The mean age at surgery was 11.5 years (range 4-18) and was significantly lower in syndromic patients. Syndromic patients also exhibited more severe clinical pattern at presentation, based on the Parikh and Lykissas score. The mean follow-up was 5.3 years (range 1.0-15.4). Redislocation occurred in 19 cases, with 10 cases requiring further realignment. The Parikh and Lykissas score and the presence of congenital ligamentous laxity were independent predictors of failure. A total of 22 knees in 18 patients required additional surgical procedures. The post-operative Kujala score was significantly lower in patients with syndromic patellar instability. CONCLUSIONS: The type of instability and the presence of underlying syndromes negatively affect the rate of redislocation and the clinical and functional outcome following patellar realignment through the three-in-one procedure. We recommend the consideration of alternative surgical strategies, especially in children with severe syndromic patellar dislocation.

The Minimally Invasive SERI Osteotomy for Pediatric Hallux Valgus.

Hallux valgus (HV), one of the most common forefoot pediatric pathologies, is characterized by lateral deviation of the big toe and medial displacement of the first metatarsal bone. Different surgical techniques have been described to correct the deformity, but no consensus has been reached regarding the best surgical option. The aim of this retrospective study was to report the results of the SERI technique in 58 pediatric HV of 45 consecutive patients. Pre- and postoperative VAS, AOFAS score, HVA, IMA and DMAA were collected. Preoperatively 3 patients (5.2%) had a mild deformity, 52 patients (89.6%) had moderate deformity and 3 patients (5.2%) had severe deformity according to Coughlin et al. Mean VAS score decreased from 5.2 ± 2.2 preoperatively to 0.8 ± 0.4 postoperatively. Mean AOFAS score improved from 68.1 ± 6.8 (range 59−75) preoperatively to 96.3 ± 3.2 (range 88−100) postoperatively, mean HVA reduced from 28.4° preoperatively to 13.2° postoperatively, mean IMA decreased from 15.2° preoperatively to 9.5° postoperatively (p < 0.01); mean DMAA decreased from 13.7° preoperatively to 8.2° postoperatively (p < 0.01). SERI technique showed satisfactory results when treating mild to severe pediatric HV deformity. No major complications were reported.

Guided Growth Technique for Epiphysiodesis and Hemiepiphysiodesis: Safety and Performance Evaluation.

BACKGROUND: Guided-growth modulation is a first-line treatment widely adopted to correct lower-limb angular deformities and limb-length discrepancies (LLD) in the paediatric population. METHODS: We conducted a retrospective study to evaluate the safety and performance of a new construct (8-Plate Plus or Guided-Growth Plate System Plus, Orthofix S.r.l) used to correct angular deformities and LLD in non-skeletally mature children. The primary endpoint was safety (from plate implantation to removal). The secondary endpoint was performance; patients treated for LLD achieved complete correction if a pre- and post-surgery difference of <0 was observed; angular deformities performance was measured in terms of IMD, ICD, mMPTA, and mLDFA. RESULTS: We performed 69 procedures in 41 patients. A total of 10 patients had an LLD, and 31 had an angular deformity. We observed nine minor complications in the hemiepiphysiodesis group. One patient experienced rebound. All 10 LLD patient treatments were successful. A total of 30/31 patients with an angular deformity had a successful treatment; the remaining patient had a partial correction. CONCLUSIONS: Guided-growth by temporary epiphysiodesis or hemiepiphysiodesis was safe and effective for angular deformities and limb-length discrepancies. Further prospective and/or randomized controlled trial studies assessing more significant cohorts of patients and a comparison group could add evidence to our findings.

Virtual Surgical Planning, 3D-Printing and Customized Bone Allograft for Acute Correction of Severe Genu Varum in Children.

Complex deformities of lower limbs are frequent in children with genetic or metabolic skeletal disorders. Early correction is frequently required, but it is technically difficult and burdened by complications and recurrence. Herein, we described the case of a 7-year-old girl affected by severe bilateral genu varum due to spondyloepiphyseal dysplasia. The patient was treated by patient-specific osteotomies and customized structural wedge allograft using Virtual Surgical Planning (VSP) and 3D-printed patient-specific instrumentation (PSI). The entire process was performed through an in-hospital 3D-printing Point-of-Care (POC). VSP and 3D-printing applied to pediatric orthopedic surgery may allow personalization of corrective osteotomies and customization of structural allografts by using low-cost in-hospital POC. However, optimal and definitive alignment is rarely achieved in such severe deformities in growing skeleton through a single operation.

Early results of the modified Simmonds-Menelaus procedure for adolescent hallux valgus.

Adolescent hallux valgus is a common problem, and there is no agreement about the best surgical technique to use to correct this deformity. Excellent results have been reported with a distal soft tissue procedure and an associated osteotomy at the base of the first metatarsal. The current study reports the early results of using an incomplete osteotomy at the base of the first metatarsal. No hardware was used to fix the osteotomy, and the postoperative immobilization was shorter. The study included 20 feet in 11 female patients. All osteotomies healed primarily without complications. The average preoperative hallux valgus of 31.2 degrees was reduced to 17.8 degrees at a minimum of 2 years follow-up. The average intermetatarsal angle improved from 13.5 degrees in the preoperative period to 11.3 degrees. Using the duPont bunion rating score as an outcome assessment, the authors had 4 excellent and 16 good results.