Investigation of the Roles of Plasma Species Generated by Surface Dielectric Barrier Discharge.

As an emerging sterilization technology, cold atmospheric plasma offers a dry, non-thermal, rapid process that is minimally damaging to a majority of substrates. However, the mechanisms by which plasma interacts with living cells are poorly understood and the plasma generation apparatuses are complex and resource-intensive. In this study, the roles of reactive oxygen species (ROS), nitric oxide (NO), and charged particles (ions) produced by surface dielectric barrier discharge (SDBD) plasma on prokaryotic (Listeria monocytogenes (Gram-positive)) and eukaryotic (human umbilical vein endothelial cells (HUVEC)) cellular function were evaluated. HUVEC and bacterial oxidative stress responses, the accumulation of nitrite in aqueous media, air ion density, and bacterial inactivation at various distances from SDBD actuators were measured. SDBD actuator designs were also varied in terms of electrode number and length to evaluate the cellular effects of plasma volume and power distribution. NO and ions were found to contribute minimally to the observed cellular effects, whereas ROS were found to cause rapid bacterial inactivation, induce eukaryotic and prokaryotic oxidative stress, and result in rapid oxidation of bovine muscle tissue. The results of this study underscore the dominance of ROS as the major plasma generated species responsible for cellular effects, with ions and RNS having a secondary, complimentary role.

Bioprinted chitosan-gelatin thermosensitive hydrogels using an inexpensive 3D printer.

The primary bottleneck in bioprinting cell-laden structures with carefully controlled spatial relation is a lack of biocompatible inks and printing conditions. In this regard, we explored using thermogelling chitosan-gelatin (CG) hydrogel as a novel bioprinting ink; CG hydrogels are unique in that it undergoes a spontaneous phase change at physiological temperature, and does not need post-processing. In addition, we used a low cost (<$800) compact 3D printer, and modified with a new extruder to print using disposable syringes and hypodermic needles. We investigated (i) the effect of concentration of CG on gelation characteristics, (ii) solution preparation steps (centrifugation, mixing, and degassing) on printability and fiber formation, (iii) the print bed temperature profiles via IR imaging and grid-based assessment using thermocouples, (iv) the effect of feed rate (10-480 cm min-1), flow rate (15-60 µl min-1) and needle height (70-280 µm) on fiber size and characteristics, and (v) the distribution of neuroblastoma cells in printed fibers, and the viability after five days in culture. We used agarose gel to create uniform print surfaces to maintain a constant gap with the needle tip. These results showed that degassing the solution, and precooling the solution was necessary for obtaining continuous fibers. Fiber size decreased from 760, to 243 µm as the feed rate increased from 10 to 100 cm min-1. Bed temperature played the greatest role in fiber size, followed by feed rate. Increased needle height initially decreased fiber size but then increased showing an optimum. Cells were well distributed within the fibers and exhibited excellent viability and no contamination after 5 d. Overall we printed 3D, sterile, cell-laden structures with an inexpensive bioprinter and a novel ink, without post-processing. The bioprinter described here and the novel CG hydrogels have significant potential as an ink for bioprinitng various cell-laden structures.

In vitro characterization of acelluar porcine adipose tissue matrix for use as a tissue regenerative scaffold.

This study evaluated a novel approach to decellularizing porcine adipose tissue while preserving its 3-D architecture. An ethanol-water mixture was used as a solvent to remove lipids and the number of freeze-thaw cycles (1-7), ethanol concentration, and tissue thickness were tested. Trypsin incubation time (1-3 h) and xylene immersion time were investigated separately. Processed sample microarchitecture was analyzed via scanning electron microscope, cellular content was analyzed via hematoxylin and eosin (H&E) staining, and DNA content was analyzed using gel electrophoresis. Tensile testing and five-stage incremental stress-relaxation testing was performed in phosphate-buffered saline at 37°C. Human neuroblasts were seeded and evaluated for infiltration and attachment over 8 days. Four cycles of freeze-thaw in 50% ethanol-water mixture removed one-third of the lipids. Microarchitecture showed the presence of pores, capillary channels, and lack of sidedness; H&E micrographs confirmed unaltered morphology and absence of cells. Incubation for 1.5 h in trypsin removed 99.5% DNA from delipidized samples. An average of 40% rehydration swelling, an elastic modulus of 324(±141) kPa, and an ultimate tensile strength of 87.4(±23.1) kPa were observed. The matrix exhibited strain hardening behavior similar to small intestinal submucosa. Cells successfully infiltrated and spread in the decellularized scaffold. Removal of lipids significantly reduced incubation in trypsin EDTA. In summary, the acellular matrix shows significant potential as a new template for tissue regeneration. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 3127-3136, 2016.