Simulated gastric leachate of 3D printer metal-fill filaments induces cytotoxic effects in rat and human intestinal models.

Metals are used in 3-dimensional (3D) printer filaments in the manufacture of 3D printed objects. Exposure to the filaments, printed objects and emissions from printing may pose health risks from release of toxic metals. This study investigated the cytotoxicity of extruded 3D printer filament leachates in rat and human intestinal cells. Copper-, bronze-, and steel-fill extruded filaments were incubated in acidic media for 2 h. Leachates were adjusted to pH 7 and cells exposed for 4 or 24 h. Concentration- and time-dependent decreases in rat and human cell viability were observed using a colorimetric assay and confirmed by microscopy. Copper- and bronze-fill leachates were more cytotoxic than steel. Copper-fill leachates had the highest copper concentrations by ICP-MS. Exposure to CuSO4 resulted in concentration-dependent cytotoxicity in rat cells. The copper chelator bathocuproine disulphonate alleviated cytotoxicity of CuSO4 and copper-fill leachate, suggesting that copper ions have a role in the cytotoxicity. Hydrogen peroxide increased and glutathione decreased in rat cells exposed to copper-fill leachate, suggesting the formation of reactive oxygen species. Overall, our data indicate that metals released from the acidic exposure of print objects using metal-fill filaments, especially copper, are toxic to rat and human intestinal cells and additional studies are needed.

Extraction and concentration of nanoplastic particles from aqueous suspensions using functionalized magnetic nanoparticles and a magnetic flow cell.

Although a considerable knowledge base exists for environmental contamination from nanoscale and colloidal particles, significant knowledge gaps exist regarding the sources, transport, distribution, and effects of microplastic pollution (plastic particles < 5 mm) in the environment. Even less is known regarding nanoplastic pollution (generally considered to be plastic particles < 1 µm). Due to their small size, nanoplastics pose unique challenges and potential risks. We herein report a technique focused on the concentration and measurement of nanoplastics in aqueous systems. Hydrophobically functionalized magnetic nanoparticles (HDTMS-FeNPs) were used as part of a method to separate and concentrate nanoplastics from environmentally relevant matrices, here using metal-doped polystyrene nanoplastics (PAN-Pd@NPs) to enable low-level detection and validation of the separation technique. Using a magnetic separation flow cell, PAN-Pd@NPs were removed from suspensions and captured on regenerated cellulose membranes. Depending on the complexity of solution chemistry, variable extraction rates were possible. PAN-Pd@ NPs were recovered from ultrapure water, synthetic freshwater, synthetic freshwater with a model natural organic matter isolate (NOM; Suwannee River Humic Acid), and from synthetic marine water, with recoveries for PAN-Pd@NPs of 84.9%, 78.9%, 70.4%, and 56.1%, respectively. During the initial method testing, it was found that the addition of NaCl was needed in the ultrapure water, synthetic freshwater and synthetic fresh water with NOM to induce particle aggregation and attachment. These results indicate that magnetic nanoparticles in combination with a flow-through system is a promising technique to extract nanoplastics from aqueous suspensions with various compositions.

In vitro intestinal toxicity of commercially available spray disinfectant products advertised to contain colloidal silver.

The use of colloidal silver-containing products as dietary supplements, immune boosters and surface disinfectants has increased in recent years which has elevated the potential for human exposure to silver nanoparticles and ions. Product mislabeling and long-term use of these products may put consumers at risk for adverse health outcomes including argyria. This study assessed several physical and chemical characteristics of five commercial products as well as their cytotoxicity using a rat intestinal epithelial cell (IEC-6) model. Concentrations of silver were determined for both the soluble and particulate fractions of the products. Primary particle size distribution and elemental composition were determined by transmission electron microscopy (TEM) and energy-dispersive X-ray spectroscopy (EDS), respectively. Hydrodynamic diameters were measured using nanoparticle tracking analysis (NTA) and dynamic light scattering (DLS). The effect of gastrointestinal (GI) simulation on the colloidal silver products was determined using two systems. First, physical and chemical changes of the silver nanoparticles in these products was assessed after exposure to Synthetic Stomach Fluid (SSF) resulting in particle agglomeration, and the appearance of AgCl on the surfaces and between particles. IEC-6 cells were exposed for 24 h to dilutions of the products and assessed for cell viability. The products were also treated with a three-stage simulated GI system (stomach and intestinal fluids) prior to exposure of the IEC-6 cells to the isolated silver nanoparticles. Cell viability was affected by each of the consumer products. Based on the silver nitrate and commercial silver nanoparticle dose response, the cytotoxicity for each of the colloidal silver products was attributed to the particulate silver, soluble silver or non­silver matrix constituents.

Transformation of Silver Nanoparticle Consumer Products during Simulated Usage and Disposal.

Twenty-two silver nanoparticle (AgNP) consumer products (CPs) were analyzed with respect to their silver speciation. Three CPs and three lab-synthesized particles were selected to simulate environmental fate and transport by simulating their intended usage and disposal methods. Since many of these products are meant for ingestion, we simulated their usage by exposing them to human synthetic stomach fluid followed by exposure to wastewater sludge. We found that during the products individual exposure to wastewater sludge, the conversion rate of silver to AgCl and Ag2S was affected by both the amount of silver ion present and the properties of the AgNP. The rates of conversion of metallic silver to silver sulfide was heavily dependent on the particle size for the lab-synthesized particles, with 90 nm PVP-capped particles reacting to a much lesser extent than the 15 nm PVP-capped or the citrate-capped particles. We observed similar sulfidation rates on two of the tested CPs with the 15 nm lab-synthesized particles despite containing silver nanoparticles >5 times larger, indicating the presence of other influencing factors. Pre-treatment with synthetic stomach fluid modified the rates of Ag2S formation. Due to the variable composition of CPs and the conditions they are exposed to between manufacture, sale, use, and disposal, their final composition may be somewhat unpredictable in the environment. In the present study, we have achieved a more accurate approximation of the expected interactions between silver nanoparticle-containing CPs and environmental media by utilizing real CPs and evaluating them with solid phase and aqueous phase analytical techniques.

In vitro intestinal toxicity of copper oxide nanoparticles in rat and human cell models.

Human oral exposure to copper oxide nanoparticles (NPs) may occur following ingestion, hand-to-mouth activity, or mucociliary transport following inhalation. This study assessed the cytotoxicity of Cupric (II) oxide (CuO) and Cu2O-polyvinylpyrrolidone (PVP) coated NPs and copper ions in rat (intestine epithelial cells; IEC-6) and human intestinal cells, two- and three-dimensional models, respectively. The effect of pretreatment of CuO NPs with simulated gastrointestinal (GI) fluids on IEC-6 cell cytotoxicity was also investigated. Both dose- and time-dependent decreases in viability of rat and human cells with CuO and Cu2O-PVP NPs and Cu2+ ions was observed. In the rat cells, CuO NPs had greater cytotoxicity. The rat cells were also more sensitive to CuO NPs than the human cells. Concentrations of H2O2 and glutathione increased and decreased, respectively, in IEC-6 cells after a 4-h exposure to CuO NPs, suggesting the formation of reactive oxygen species (ROS). These ROS may have damaged the mitochondrial membrane of the IEC-6 cells causing a depolarization, as a dose-related loss of a fluorescent mitochondrial marker was observed following a 4-h exposure to CuO NPs. Dissolution studies showed that Cu2O-PVP NPs formed soluble Cu whereas CuO NPs essentially remained intact. For GI fluid-treated CuO NPs, there was a slight increase in cytotoxicity at low doses relative to non-treated NPs. In summary, copper oxide NPs were cytotoxic to rat and human intestinal cells in a dose- and time-dependent manner. The data suggests Cu2O-PVP NPs are toxic due to their dissolution to Cu ions, whereas CuO NPs have inherent cytotoxicity, without dissolving to form Cu ions.

Characterization of engineered nanoparticles in commercially available spray disinfectant products advertised to contain colloidal silver.

Given the potential for human exposure to silver nanoparticles from spray disinfectants and dietary supplements, we characterized the silver-containing nanoparticles in 22 commercial products that advertised the use of silver or colloidal silver as the active ingredient. Characterization parameters included: total silver, fractionated silver (particulate and dissolved), primary particle size distribution, hydrodynamic diameter, particle number, and plasmon resonance absorbance. A high degree of variability between claimed and measured values for total silver was observed. Only 7 of the products showed total silver concentrations within 20% of their nominally reported values. In addition, significant variations in the relative percentages of particulate vs. soluble silver were also measured in many of these products reporting to be colloidal. Primary silver particle size distributions by transmission electron microscopy (TEM) showed two populations of particles - smaller particles (<5nm) and larger particles between 20 and 40nm. Hydrodynamic diameter measurements using nanoparticle tracking analysis (NTA) correlated well with TEM analysis for the larger particles. Z-average (Z-Avg) values measured using dynamic light scattering (DLS); however, were typically larger than both NTA or TEM particle diameters. Plasmon resonance absorbance signatures (peak absorbance at around 400nm indicative of metallic silver nanoparticles) were only noted in 4 of the 9 yellow-brown colored suspensions. Although the total silver concentrations were variable among products, ranging from 0.54mg/L to 960mg/L, silver containing nanoparticles were identified in all of the product suspensions by TEM.

A comprehensive framework for evaluating the environmental health and safety implications of engineered nanomaterials.

Engineered nanomaterials (ENM) are a growing aspect of the global economy, and their safe and sustainable development, use, and eventual disposal requires the capability to forecast and avoid potential problems. This review provides a framework to evaluate the health and safety implications of ENM releases into the environment, including purposeful releases such as for antimicrobial sprays or nano-enabled pesticides, and inadvertent releases as a consequence of other intended applications. Considerations encompass product life cycles, environmental media, exposed populations, and possible adverse outcomes. This framework is presented as a series of compartmental flow diagrams that serve as a basis to help derive future quantitative predictive models, guide research, and support development of tools for making risk-based decisions. After use, ENM are not expected to remain in their original form due to reactivity and/or propensity for hetero-agglomeration in environmental media. Therefore, emphasis is placed on characterizing ENM as they occur in environmental or biological matrices. In addition, predicting the activity of ENM in the environment is difficult due to the multiple dynamic interactions between the physical/chemical aspects of ENM and similarly complex environmental conditions. Others have proposed the use of simple predictive functional assays as an intermediate step to address the challenge of using physical/chemical properties to predict environmental fate and behavior of ENM. The nodes and interactions of the framework presented here reflect phase transitions that could be targets for development of such assays to estimate kinetic reaction rates and simplify model predictions. Application, refinement, and demonstration of this framework, along with an associated knowledgebase that includes targeted functional assay data, will allow better de novo predictions of potential exposures and adverse outcomes.

In vitro bioaccessibility of copper azole following simulated dermal transfer from pressure-treated wood.

Micronized copper azole (MCA) and micronized copper quaternary (MCQ) are the latest wood preservatives to replace the liquid alkaline copper and chromated copper arsenate preservatives due to concerns over the toxicity or lack of effectiveness of the earlier formulations. Today, the use of MCA has become abundant in the wood preservative industry with approximately 38millionlbs of copper carbonate being used to treat lumber each year. Despite this widespread usage, little information is available on the bioaccessibility of this preservative upon gastrointestinal exposure. Using a simulated hand-to-mouth/gastric system exposure study we investigated several types of commercially available copper-treated lumber products as-purchased and after exposure to outdoor weathering conditions. Soluble and particulate fractions of copper were measured after transfer to and release from surface wipes passed along copper-treated lumber and exposed to synthetic stomach fluid (SSF, pH1.5) or deionized (DI) water. Wipes passed along new boards contained greater amounts of copper than wipes from weathered boards. The total copper recovered from the wipes after microwave extraction varied among the different wood types. For all wood types the copper released into SSF was more soluble than what was soluble in DI water. The data suggest that copper from treated wood is highly bioaccessible in SSF regardless of wood type and weathering condition.

Separation and measurement of silver nanoparticles and silver ions using magnetic particles.

The recent surge in consumer products and applications using metallic nanoparticles has increased the possibility of human or ecosystem exposure due to unintentional release into the environment. To protect consumer health and the environment, there is an urgent need to develop tools that can characterize and quantify these materials at low concentrations and in complex matrices. In this study, magnetic nanoparticles coated with either dopamine or glutathione were used to develop a new, simple and reliable method for the separation/pre-concentration of trace amounts of silver nanoparticles followed by their quantification using inductively coupled plasma mass spectrometry (ICP-MS). The structurally modified magnetic particles were able to capture trace amounts of silver nanoparticles (~2 ppb) and concentrate (up to 250 times) the particles for analysis with ICP-MS. Under laboratory conditions, recovery of silver nanoparticles was >99%. More importantly, the magnetic particles selectively captured silver nanoparticles in a mixture containing both nano-particulate and ionic silver. This unique feature addresses the challenges of separation and quantification of silver nanoparticles in addition to the total silver in environmental samples. Spiking experiments showed recoveries higher than 97% for tap water and both fresh and saline surface water.

Changes in silver nanoparticles exposed to human synthetic stomach fluid: effects of particle size and surface chemistry.

The significant rise in consumer products and applications utilizing the antibacterial properties of silver nanoparticles (AgNPs) has increased the possibility of human exposure. The mobility and bioavailability of AgNPs through the ingestion pathway will depend, in part, on properties such as particle size and the surface chemistries that will influence their physical and chemical reactivities during transit through the gastrointestinal tract. This study investigates the interactions between synthetic stomach fluid and AgNPs of different sizes and with different capping agents. Changes in morphology, size and chemical composition were determined during a 30 min exposure to synthetic human stomach fluid (SSF) using Absorbance Spectroscopy, High Resolution Transmission Electron and Scanning Electron Microscopy (TEM/SEM), Dynamic Light Scattering (DLS), and Nanoparticle Tracking Analysis (NTA). AgNPs exposed to SSF were found to aggregate significantly and also released ionic silver which physically associated with the particle aggregates as silver chloride. Generally, the smaller sized AgNPs (<10nm) showed higher rates of aggregation and physical transformation than larger particles (75 nm). Polyvinylpyrrolidone (pvp)-stabilized AgNPs prepared in house behaved differently in SSF than particles obtained from a commercial source despite having similar surface coating and size distribution characteristics.

Guided visualization interventions on perceived stress, dyadic satisfaction and psychological symptoms in highly stressed couples.

This study focused on the effect of a brief CBT-based relaxation/guided visualization intervention on perceived stress, dyadic satisfaction and psychological symptoms. This study also tested the hypothesis that indicators of global orientation including Sense of Coherence and Differentiation of Self would mediate between perceived stress and symptoms of physical, psychological and relational distress. A three session intervention used guided visualization scripts which incorporated relaxation and controlled breathing techniques as well as a CBT approach that focused on stress management and internal locus of control. Results indicated that after the intervention, participants showed lower levels of perceived stress and lower levels of dyadic distress, as well as lower psychological and physical complaints as reported with the Symptom Checklist-90-R. Both Sense of Coherence and Differentiation of Self were mediators for the effect of perceived stress on the number of endorsed symptoms.

Alterations in physical state of silver nanoparticles exposed to synthetic human stomach fluid.

The bioavailability of ingested silver nanoparticles (AgNPs) depends in large part on initial particle size, shape and surface coating, properties which will influence aggregation, solubility and chemical composition during transit of the gastrointestinal tract. Citrate-stabilized AgNPs were exposed to synthetic human stomach fluid (SSF) (pH 1.5) and changes in size, shape, zeta potential, hydrodynamic diameter and chemical composition were determined during a 1h exposure period using Surface Plasmon Resonance (SPR), High Resolution Transmission Electron Microscopy/Energy Dispersive X-ray Spectroscopy (TEM/EDS), Dynamic Light Scattering (DLS) and X-ray Powder Diffraction (XRD) combined with Rietveld analysis. Exposure of AgNPs to SSF produced a rapid decrease in the SPR peak at 414nm and the appearance of a broad absorbance peak in the near infrared (NIR) spectral region. During exposure to SSF, changes in zeta potential, aggregation and morphology of the particles were also observed as well as production of silver chloride which appeared physically associated with particle aggregates.

Analysis of engineered nanomaterials in complex matrices (environment and biota): general considerations and conceptual case studies.

Advances in the study of the environmental fate, transport, and ecotoxicological effects of engineered nanomaterials (ENMs) have been hampered by a lack of adequate techniques for the detection and quantification of ENMs at environmentally relevant concentrations in complex media. Analysis of ENMs differs from traditional chemical analysis because both chemical and physical forms must be considered. Because ENMs are present as colloidal systems, their physicochemical properties are dependent on their surroundings. Therefore, the simple act of trying to isolate, observe, and quantify ENMs may change their physicochemical properties, making analysis extremely susceptible to artifacts. Many analytical techniques applied in materials science and other chemical/biological/physical disciplines may be applied to ENM analysis as well; however, environmental and biological studies may require that methods be adapted to work at low concentrations in complex matrices. The most pressing research needs are the development of techniques for extraction, cleanup, separation, and sample storage that introduce minimal artifacts to increase the speed, sensitivity, and specificity of analytical techniques, as well as the development of techniques that can differentiate between abundant, naturally occurring particles, and manufactured nanoparticles.

Changes in agglomeration of fullerenes during ingestion and excretion in Thamnocephalus platyurus.

The crustacean Thamnocephalus platyurus was exposed to aqueous suspensions of fullerenes C(60) and C(70) . Aqueous fullerene suspensions were formed by stirring C(60) and C(70) as received from a commercial vendor in deionized water (termed aqu/C(60) and aqu/C(70) ) for approximately 100 d. The Z-average (mean hydrodynamic) diameters of aqu/C(60) and aqu/C(70) aggregates as measured by dynamic light scattering were 517 ± 21 nm and 656 ± 39 nm (mean ± 95% confidence limit), respectively. Exposure of T. platyurus to fullerene suspensions resulted in the formation of dark masses in the digestive track visible under a stereo microscope (×40 magnification). Fullerene ingestion over 1 h of exposure was quantitatively determined after extraction and analysis by high-performance liquid chromatography-mass spectrometry (HPLC-MS). One-hour exposures (at 3 mg/L and 6 mg/L) resulted in aqu/C(60) burdens of 2.7 ± 0.4 µg/mg and 6.8 ± 1.5 µg/mg wet weight, respectively. Thin-section transmission electron microscopy (TEM) images of aqu/C(60) -exposed T. platyurus showed the formation in the gut of fullerene agglomerates (5-10 µm) that were an order of magnitude larger than the suspended fullerene agglomerates. Upon excretion, the observed fullerene agglomerates were in the 10- to 70-µm size range and settled to the bottom of the incubation wells. In contrast to the control polystyrene microspheres, which dispersed after depuration, the aqu/C(60) agglomerates (greater than two orders of magnitude larger than the suspended fullerenes) remained agglomerated for up to six months. When exposed to fullerenes, T. platyurus shows the potential to influence agglomerate size and may facilitate movement of these nanoparticles from the water column into sediment.

Evaluation of a multi-component approach to cognitive-behavioral therapy (CBT) using guided visualizations, cranial electrotherapy stimulation, and vibroacoustic sound.

This pilot study examines the use of guided visualizations that incorporate both cognitive and behavioral techniques with vibroacoustic therapy and cranial electrotherapy stimulation to form a multi-component therapeutic approach. This multi-component approach to cognitive-behavioral therapy (CBT) was used to treat patients presenting with a range of symptoms including anxiety, depression, and relationship difficulties. Clients completed a pre- and post-session symptom severity scale and CBT skills practice survey. The program consisted of 16 guided visualizations incorporating CBT techniques that were accompanied by vibroacoustic therapy and cranial electrotherapy stimulation. Significant reduction in symptom severity was observed in pre- and post-session scores for anxiety symptoms, relationship difficulties, and depressive symptoms. The majority of the clients (88%) reported use of CBT techniques learned in the guided visualizations at least once per week outside of the sessions.

Preparation and characterization of molecularly imprinted electropolymerized carbon electrodes.

Molecularly imprinted polymers (MIPs) selective for fluorescein, rhodamine or 2,4-dichlorophenoxyacetic acid (2,4-D) were electropolymerized onto graphite electrodes using an aqueous solution equimolar in resorsinol/ortho-phenylenediamine and in the presence of the template molecule. For the dyes, the MIP-coated electrodes showed higher affinity for their template molecule than for a non-template dye. The 2,4-D-MIP-coated electrode showed a concentration dependent response for 2,4-D as compared to the polymer-coated electrode prepared in the absence of template molecule.