Near-infrared spectra of liquid and gas samples by diffuse reflectance employing benchtop and handheld spectrophotometers.

This paper describes a new method to obtain NIR spectra of liquid and gas samples by diffuse reflectance, which is especially suitable for handheld spectrophotometers, since most of these instruments are designed to acquire spectrum using this geometry. The core of the method is a diffuse reflectance cell, which consists of a vial containing a mixture of the liquid or gas sample (rare medium) and a powder (dense medium). Using this strategy, no adaptation is required to measure spectra with most portable NIR spectrometers. This new method was used to obtain NIR spectra of several liquids and gases, which were compared with traditional transmittance spectra. As a proof of concept, measurements of biodiesel/vegetable oil/diesel blends were used to build multivariate calibrations to predict the contents of biodiesel and vegetable oil in diesel blends using benchtop and handheld FT-NIR spectrophotometers. This low-cost method was demonstrated to be suitable for overcoming problems related to the handling of viscous samples and expand the applications with portable NIR instruments.

Understanding the Metastability of Theophylline FIII by Means of Low-Frequency Vibrational Spectroscopy.

While theophylline has been extensively studied with multiple polymorphs discovered, there is still currently no conclusive structure for the metastable theophylline form III. In this present work, by combining more widely used techniques such as X-ray diffraction and thermogravimetric analysis with more emerging techniques like low-frequency Raman and terahertz time-domain spectroscopy, to analyze the structure and dynamics of a crystalline system, it was possible to provide further evidence that the form III structure has a theophylline monohydrate structure with the water molecules removed. Solid-state density functional theory simulations were paramount in proving that this proposed structure is correct and explain how vibrational modes within the crystal structures feature and govern polymorphic transitions and the metastable form III. Through the insight provided by both simulated and experimental results, it was possible to decisively conclude the elusive crystal structure of theophylline form III. It was also shown that the correct space group for theophylline monohydrate is not P21/n but, in fact, Pc.

Low-frequency Raman spectrophotometer with wide laser illumination on the sample: A tool for pharmaceutical analytical analysis.

This work describes an optical configuration for a Raman spectrophotometer, which permits variation of the laser spot size from 3 to 3000 µm, maintaining a high Raman photons throughput and allowing acquisitions with a short integration time. In addition, the instrument can acquire spectra from the low to middle frequency vibrational range (10 to 2000 cm-1), on the Stokes and anti-Stokes sides. One of the features of this new optical configuration is the non-use of beam splitters to redirect the scattered light to the detector, which would sacrifice the laser power. The quantitative and qualitative analytical performances of the Raman spectrophotometer were evaluated using chemometric models to predict the concentrations of different active pharmaceutical ingredients (APIs) in mixtures with polymorphs and excipients, as well as by analysis of an API mixture employing hyperspectral imaging. This new optical configuration was shown to be versatile for pharmaceutical purposes and could be used in applications such as the characterization of new drugs or the quality control of raw materials and processes, using normal Raman measurements or SERS (surface-enhanced Raman scattering).

Near infrared emission spectroscopy for rapid compositional analysis of Portland cements.

Near infrared emission spectroscopy (NIRES) has been investigated to yield a new analytical method for determination of CaO, SiO2, Al2O3, Fe2O3, MgO, and SO3 in Portland cement samples. The analyses were accomplished by correlation of the second derivative NIRES spectra with reference elemental analyses made by X-ray Fluorescence (XRF), using Partial Least Square (PLS) regression models. Four different types of cements (type II, III, IV and V) were included in the models. The results show RMSEP from 0.18 to 1.67% (m/m) (which represents 8.6 to 2.8% of the mean value parameters, respectively) and precision (repeatability) from 0.12 to 1.49% (m/m). The worse performance of prediction [RMSEP = 0.18% (m/m), r2 = 0.63] was found for Fe2O3 determination due its low variability in the samples employed in the calibration and validation set, usual low content in cements, and high correlation with the weak emitting C4AF phase. However, the paired t-test at 95% confidence level demonstrated that the analytical results obtained by NIRES multivariate models are equivalent to measurements performed by XRF for all oxides analyzed. The cost, speed and safety aspects are improved in comparison with the XRF method. The method based on NIRES requires no sample preparation and speed up the cement analysis (6 min) about 5 times when compared with the method based on XRF presently employed by cement industries.

Electric field-assisted solid phase extraction and cleanup of ionic compounds in complex food matrices: Fluoroquinolones in eggs.

The use of electric fields as additional driving forces in sample preparation techniques is an innovative approach that is environmentally friendly, straightforward, and able to overcome several limitations of conventional sample preparation procedures. In this work, the advantages of electric field-assisted solid phase extraction (E-SPE) using syringe-type cartridges were demonstrated for the extraction of four fluoroquinolones (FQs) in their anionic forms. The FQs were extracted from eggs and subsequently determined by UHPLC-MS/MS. The use of electric fields during the washing and final elution steps resulted in a significant improvement of the extraction efficiencies for almost all FQs when compared to conventional SPE. Intra- and inter-day assays showed coefficients of variation below 10%. The better cleanup also resulted in the appearance of less precipitated matter in the final eluate, as well as reduced matrix effects. The results showed that the electrophoretic forces derived from electric fields are a promising way of significantly increasing the extraction efficiency of ionic analytes, while minimizing matrix effects associated with complex samples.

A new approach to polarimetric measurements based on birefringent crystals and diode lasers.

A new polarimetric instrument and measurement method is described based on the use of diode lasers as radiation source (532, 650 and 1064nm) and birefringent prisms, such as Glan-Laser and Wollaston, as analyzers. The laser radiation is passed through a dichroic polarizer film for further orientation of its polarization plane at 45° in relation to the polarization plane of the analyzer. The polarized beam, oriented in that way, passes the sample cell, impinges the prism surface, and the intensities of the two emerged beams are detected by two twin silicon detectors. Ideally, in the absence of any optically active substances, the crystals produces two orthogonally polarized refracted beams of equal intensity. In the presence of an optically active substance, the arctangent of the square root of the beam intensities ratio is equal to the new polarization angle (ß) of the laser beam. The rotation angle imposed for any optically active substance present in the sample cell is then given by: α=(45-ß)°. Because the rotation is obtained by the ratio of the intensities of two beams, it is independent of the laser intensity, which can vary up to ±15% with no significant effect on the accuracy of the polarimetric measurement. The instrument has been evaluated for measurement of optically active substances such as sucrose and fructose. The instrument employs low cost components, is capable of attaining a repeatability of ±0.003° and can measure the rotation angle, over a ±45° range, in less than 2s. Because it does not present any moving parts it can be easily adapted for in/on-line process monitoring of optically active substances.

A monosegmented-flow Karl Fischer titrator.

A monosegmented volumetric Karl Fischer titrator is described to mechanize the determination of water content in organic solvents. The system is based on the flow-batch characteristics of the monosegmented analysis concept and employs biamperometry to monitor the progress of the titration. The system shows accuracy and precision that are highly independent of the flow rate, does not require calibration, and is carried out in a closed system capable of minimizing contact of the sample and reagents with ambient moisture. Sample volumes in the range of 40-300muL are employed, depending on the water concentration. An automatic dilution is provided to deal with concentrated samples. The consumption of Karl Fischer reagent depends on the water content of the sample but is not larger than 100muL. The system was evaluated for determination of water in ethanol and methanol in the range 0.02-0.5% (w/w). The average relative precision estimated in that range (9-3%) is comparable to that obtained with a larger volume commercial system and no significant difference was observed between the results obtained for the two systems at the 95% confidence level. A complete titration can be performed in less than 5min employing the proposed system.

A new approach to flow-batch titration. A monosegmented flow titrator with coulometric reagent generation and potentiometric or biamperometric detection.

Monosegmented flow analysis (MSFA) has been used as a flow-batch system to produce a simple, robust, and mechanized titrator that enables true titrations to be performed without the use of standards. This paper also introduces the use of coulometry with monosegmented titration by proposing a versatile flow cell. Coulometric generation of the titrand is attractive for titrations performed in monosegmented systems, because the reagent can be added without increasing the volume of sample injected. Also, biamperomeric and potentiometric detection of titration end-points can increase the versatility of the monosegmented titrator. The cell integrates coulometric generation of the titrand with detection of end-point by potentiometry or biamperometry. The resulting titrator is a flow-batch system in which the liquid monosegment, constrained by the interfaces of the gaseous carrier stream, plays the role of a sample of known volume to be titrated. The system has been used for determination of ascorbic acid, by coulometric generation of I2 with biamperometric detection, and for determination of Fe(II), by coulometric generation of Ce(IV) with potentiometric detection of the end-point, both in feed supplements.

Determination of pentavalent antimony in antileishmaniotic drugs using an automated system for liquid-liquid extraction with on-line detection.

An automated system for liquid-liquid extraction flow analysis (LLE-FA) for the determination of Sb(V) in antileishmanial drugs is presented. The method is based on extraction in a 5mL glass extraction chamber of an ion pair formed between hexachloroantimoniate anion and rhodamine B cation into toluene. The detection system consists of a green light emitting diode (LED) and a photodiode. The system is controlled by a microcomputer using a program written in Visual Basic 3.0. The extraction process was optimized and the following experimental parameters were established: sample loop of 150muL; reagent loop of 900muL; stirring time of 100s; phase separation time of 80s; volumetric ratio of 1:1 (aqueous/organic). The method was in-house validated for the determination of Sb(V) in meglumine antimoniate. The following performance criteria were obtained: linearity of 0.9989, linear range of 7.0x10(-5) to 7.2x10(-4)mol Sb(V)L(-1), sensitivity of 1.61x10(6)+/-2 arbitrary units Lmol(-1) (P<0.05), intra-assay precision of 3.5% (n=5; 4.1x10(-4)molL(-1) Sb(V). Whereas the method is selective in the presence of Sb(III), As(III) and Pb(II) at concentrations up to one tenth of the concentration of Sb(V), As(V) interferes. The accuracy of the method was evaluated through comparison of results obtained from analyses of pharmaceutical formulations by the proposed LLE-FA method with those obtained by inductively coupled plasma optic emission spectrometry (ICP OES) and differential pulse polarography for total antimony and Sb(III), respectively. The proposed method presented an analytical frequency of eight analysis per hour and is suitable for Sb(V) determination in the quality control of drugs employed for the treatment of leishmaniasis.

Effect of ethanol in the organic phase on liquid-liquid extraction in monosegmented flow analysis. Determination of zinc in drugs.

In liquid-liquid extraction performed by monosegmented flow analysis (MSFA), the aqueous sample is introduced between two air bubbles and flows, under restricted dispersion, through a glass extraction tube where the analyte is retained, usually at pH higher than 8. The retained analyte is removed to a small volume of an organic phase containing a ligand which is introduced after the second air bubble. In this work, the effect of the organic phase composition on the extraction of Cu(II), Zn(II) and Cd(II) in MSFA systems was investigated by changing the ethanol content (0.1-4% v/v) in toluene, chloroform and carbon tetrachloride. The extracting efficiency of the organic phases containing ethanol was evaluated by using dithizone (DT), 1-2-pyridylazo-2 naphthol (PAN) and sodium diethyldithiocarbamate (DDTC) as ligands for the metals. The MSFA extraction system was improved by introducing a new syringe-based device for organic phase delivery. The presence of ethanol in the organic phase shows a remarkable (up to ten times) effect on the extraction efficiency of the flow system when DT is employed. Its presence is mandatory if DDTC is used, as it accounts for ligand solubility in the organic phase. The extraction efficiency also increases with the pH of the aqueous phase as a consequence of higher ionisation of the glass silanols, where the analytes are adsorbed before extraction. The system has been evaluated for determination of Zn(II) in drugs showing a mean R.S.D. of 2.2% and mean relative accuracy of 4.4%, when compared with atomic absorption spectrometry results. Typical sample frequency, sample and organic phase consumption are 30 samples per hour, 200 and 100 mul, respectively.