Dosimetric comparison of VMAT standard optimization (SO) and multi-criteria optimization (MCO) treatment plans with standard mode delivery (STD) or sliding window (SW) for head and neck cancer.

PURPOSE: A new development on the RayStation treatment planning system (TPS) allows a plan to be planned by imposing a constraint on the leaf sequencing: all leaves move in the same direction before moving again in the opposite direction to create a succession of sliding windows (SWs). The study aims to investigate this new leaf sequencing, coupled with standard optimization (SO) and multi-criteria optimization (MCO) and to compare it with the standard sequencing (STD). METHODS: Sixty plans were replanned for 10 head and neck cancer patients (two dose levels simultaneously SIB, 56 and 70 Gy in 35 fractions). All plans were compared, and a Wilcoxon signed-rank test was performed. Pre-processing QA and metrics of multileaf collimator (MLC) complexity were studied. RESULTS: All methodologies met the dose requirements for the planning target volumes (PTVs) and organs at risk (OARs). SO demonstrates significantly best results for homogeneity index (HI), conformity index (CI), and target coverage (TC). SO-SW gives best results for PTVs (D98% and D2% ) but the differences between techniques are less than 1%. Only the D2%,PTV-56 Gy is higher with both MCO methods. MCO-STD offer the best sparing OARs (parotids, spinal cord, larynx, oral cavity). The gamma passing rates (GPRs) with 3%/3 mm criteria between the measured and calculated dose distributions are higher than 95%, slightly lowest with SW. The number of monitor units (MUs) and MLC metrics are higher in SW show a higher modulation. CONCLUSIONS: All plans are feasible for the treatment. A clear advantage of SO-SW is that the treatment plan is more straightforward to planning by the user due to the more advanced modulation. MCO stands out for its ease of use and will allow a less experienced user to offer a better plan than in SO. In addition, MCO-STD will reduce the dose to the OARs while maintaining good TC.

Mechanochemical Synthesis of PEDOT:PSS Hydrogels for Aqueous Formulation of Li-Ion Battery Electrodes.

Water-soluble binders can enable greener and cost-effective Li-ion battery manufacturing by eliminating the standard fluorine-based formulations and associated organic solvents. The issue with water-based dispersions, however, remains the difficulty in stabilizing them, requiring additional processing complexity. Herein, we show that mechanochemical conversion of a regular poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) water-based dispersion produces a hydrogel that meets all the requirements as binder for lithium-ion battery electrode manufacture. We particularly highlight the suitable slurry rheology, improved adhesion, intrinsic electrical conductivity, large potential stability window and limited corrosion of metal current collectors and active electrode materials, compared to standard binder or regular PEDOT:PSS solution-based processing. When incorporating the active materials, conductive carbon and additives with PEDOT:PSS, the mechanochemical processing induces simultaneous binder gelation and fine mixing of the components. The formed slurries are stable, show no phase segregation when stored for months, and produce highly uniform thin (25 µm) to very thick (500 µm) films in a single coating step, with no material segregation even upon slow drying. In conjunction with PEDOT:PSS hydrogels, technologically relevant materials including silicon, tin, and graphite negative electrodes as well as LiCoO2, LiMn2O4, LiFePO4, and carbon-sulfur positive electrodes show superior cycling stability and power-rate performances compared to standard binder formulation, while significantly simplifying the aqueous-based electrode assembly.

What It Takes to Be a Pseudomonas aeruginosa? The Core Genome of the Opportunistic Pathogen Updated.

Pseudomonas aeruginosa is an opportunistic bacterial pathogen able to thrive in highly diverse ecological niches and to infect compromised patients. Its genome exhibits a mosaic structure composed of a core genome into which accessory genes are inserted en bloc at specific sites. The size and the content of the core genome are open for debate as their estimation depends on the set of genomes considered and the pipeline of gene detection and clustering. Here, we redefined the size and the content of the core genome of P. aeruginosa from fully re-analyzed genomes of 17 reference strains. After the optimization of gene detection and clustering parameters, the core genome was defined at 5,233 orthologs, which represented ~ 88% of the average genome. Extrapolation indicated that our panel was suitable to estimate the core genome that will remain constant even if new genomes are added. The core genome contained resistance determinants to the major antibiotic families as well as most metabolic, respiratory, and virulence genes. Although some virulence genes were accessory, they often related to conserved biological functions. Long-standing prophage elements were subjected to a genetic drift to eventually display a G+C content as higher as that of the core genome. This contrasts with the low G+C content of highly conserved ribosomal genes. The conservation of metabolic and respiratory genes could guarantee the ability of the species to thrive on a variety of carbon sources for energy in aerobiosis and anaerobiosis. Virtually all the strains, of environmental or clinical origin, have the complete toolkit to become resistant to the major antipseudomonal compounds and possess basic pathogenic mechanisms to infect humans. The knowledge of the genes shared by the majority of the P. aeruginosa isolates is a prerequisite for designing effective therapeutics to combat the wide variety of human infections.

Melt-polymerization of TEMPO methacrylates with nano carbons enables superior battery materials.

A solvent-free, melt polymerization process of a 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) precursor for rechargeable organic radical batteries is proposed. In situ carbon incorporation in the melted monomer phase yields a nanoscale homogenous polymer composite. Superior battery performances including higher power and cycling stability are attained by using the melt-polymerization method.

Tocol modified glycol chitosan for the oral delivery of poorly soluble drugs.

The aim of this study was to develop tocol derivatives of chitosan able (i) to self-assemble in the gastrointestinal tract and (ii) to enhance the solubility of poorly soluble drugs. Among the derivatives synthesized, tocopherol succinate glycol chitosan (GC-TOS) conjugates spontaneously formed micelles in aqueous solution with a critical micelle concentration of 2 µg mL(-1). AFM and TEM analysis showed that spherical micelles were formed. The GC-TOS increased water solubility of 2 model class II drugs. GC-TOS loading efficiency was 2.4% (w/w) for ketoconazole and 0.14% (w/w) for itraconazole, respectively. GC-TOS was non-cytotoxic at concentrations up to 10 mg mL(-1). A 3.4-fold increase of the apparent permeation coefficient of ketoconazole across a Caco-2 cell monolayer was demonstrated. Tocol polymer conjugates may be promising vehicles for the oral delivery of poorly soluble drugs.

Continuous flow enantioselective arylation of aldehydes with ArZnEt using triarylboroxins as the ultimate source of aryl groups.

A continuous flow system for the synthesis of enantioenriched diarylmethanols from aldehydes is described. The system uses an amino alcohol-functionalized polystyrene resin as the catalyst, and the arylating agent is conveniently prepared by transmetallation of triarylboroxins with diethylzinc.