Simulation of transient heat transfer during forced convection cooling of cocoyam (Colocasia Esculenta (L.) Schott) tubers.

In this study, a prediction model based on transient heat transfer was modified and validated using experimental data. The time required to cool tubers from field temperature of 30 ± 2 °C to the target storage temperature of 12 ± 0.2 °C was predicted directly from the model. Moreover, total cooling time ranged from 127.8 - 154.2 min for small tubers and 190.8-262.2 min for large tubers while the field heat removed ranged from 9.61 - 10.17 kJ for small tubers and 24.78-31.90 kJ for large tubers between the extremes of the air velocity. Tuber orientation to airflow neither influenced the heat transfer coefficients and Biot numbers nor the cooling time and amount of field heat removed. The results from this study could be applied in the design and optimisation of forced convection cooling systems to precool tubers immediately after harvest and for extended duration storage.

Optimization of roughing filtration unit for a handwashing wastewater recirculation point-of-use system.

A downward roughing filter unit consisting of silica sand as the filter medium was optimized for performance towards removal of turbidity and suspended solids from handwashing wastewater. Design-Expert software was employed to optimize media particle size, filter depth, and flowrate. Linear and quadratic models were found to best fit the responses of turbidity and suspended solids removal, respectively. Particle size and flow rate were the only parameters with significant effects on removal of turbidity and suspended solids. Optimal conditions were found to be media particle size 0.6 mm, filter depth 12 cm, and flow rate 0.3 Lmin-1, corresponding to removal efficiencies of 62 and 67% for turbidity and total suspended solids (TSS), respectively, as predicted by the model. Validation of model at optimal conditions resulted in turbidity and TSS removal of 55 and 53%, respectively. Additionally, removal efficiencies of the roughing filter towards apparent colour, true colour, biochemical oxygen demand (BOD5), and chemical oxygen demand (COD) from handwashing wastewater were 56, 20, 32, and 5%, respectively. Overall, although turbidity of filtered water was >50 NTU, the reduction achieved by roughing filtration is a significant step in enhancing the performance of water treatment processes downstream, including filtration and adsorption by slow sand filters and activated carbon, respectively.

A modification of a traditional Ethiopian maize store for solar powered ambient drying to reduce post-harvest losses.

A gombisa is a traditional Ethiopian structure widely used for maize storage over several months. It lacks adequate ventilation for timely moisture removal, which promotes mold development and aflatoxin production. In this study, a traditional gombisa was compared to one modified by installing a solar powered fan to provide forced ambient air ventilation during daytime. Approximately 900 kg of moist ear maize were loaded into each structure and samples from selected locations were weighed periodically to monitor moisture loss. Temperature and relative humidity of ambient air and inside the maize bulk were continuously recorded. Significantly faster drying was achieved in the modified gombisa, where drying occurred from bottom to top. In the traditional store, drying was much faster at the surface, with drying rate declining sharply with increasing depth in the bulk due to more limited air exchange. Relative humidity in the bulk center of the traditional structure remained above 90% for more than 4 weeks while in the modified gombisa it decreased progressively from the beginning of the trial. The results are promising and the modifications simple to implement, with the potential to effectively reduce post-harvest losses of maize. Field tests in Ethiopia are recommended.