RESUMO
The article presents the exploration of flax and hemp fibers' surface free energy depending on the chemical composition of the fiber, which is closely related to the plant variety and the method of extracting the fiber. For this purpose, tests of the surface free energy (SFE), evaluation of the percentage content of individual fiber components and FTIR analyses were conducted. The research was carried out with the use of fibrous materials prepared in three different ways: 1. To analyze the effect of subsequent stages of flax fibers refining process on chemical composition and SFE, 2. to explore the dependence of fiber SFE on hemp variety, the water-retting hemp fibers were used, 3. To evaluate the influence of the retting method of hemp fibers BIALOBRZESKIE variety on SFE, the fibers extracted with the use of dew and water retting were used as the research material. The study confirmed that the content of individual components in the fiber influenced its sorption capacity and therefore determined its hydrophilic properties. The values of Pearson's linear correlation coefficients determined in the statistical analysis proved that the surface free energy was strongly correlated with the content of individual components in the fibers. Understanding the wettability characteristics of bast fibers will allow modeling the properties of products made of these fibers and designing surface modification processes in order to obtain specific functionality of textile products, depending on their intended utilization.
RESUMO
This study presents the quantity and quality of flax (Linum usitatissimum L.) and hemp (Cannabis sativa L.) fibers obtained depending on the fiber extraction method. The extraction methods used in this study were osmotic degumming, dew retting, and water retting. The degummed straw was analyzed for fiber content, while the metrological, chemical, and physical properties were determined for the fibers obtained. It was shown that these properties change based on the method of fiber extraction used. The highest fiber content in the straw was obtained using the osmotic degumming method. These fibers are characterized by a light color, no unpleasant odor, low linear mass, good tenacity, lowest hygroscopicity, and reduced flammability compared to fibers obtained via the dew and water retting of straw.
RESUMO
BACKGROUND: The COVID-19 pandemic, which affected the entire global population, had an impact on our health and quality of life. Many people had complications, were hospitalised or even died due to SARS-CoV-2 infection. The health systems of many countries had to radically change their way of functioning and scientists around the world worked intensively to develop a vaccine for the SARS-CoV-2 virus. AIM: The aim of this work is to assess the quality of life of patients who were hospitalised for COVID-19, using the SF-36 questionnaire. METHODS: Between May and August 2022, we conducted a telephone assessment of quality of life in patients who were hospitalised for COVID-19 at the Temporary Hospital in Pyrzowice (Silesia, Poland), between November 2021 and January 2022. RESULTS: Quality of life was significantly lower in women (p = 0.040), those with DM2 (p = 0.013), CKD (p = 0.041) and the vaccinated (p = 0.015). CONCLUSIONS: People with chronic kidney disease, diabetes mellitus and women had a lower quality of life after COVID-19 disease. However, people who were vaccinated for SARS-CoV-2 had a lower quality of life than non-vaccinated people did. This is possibly due to the higher mean age, and probably the higher disease burden, in the vaccinated group.
RESUMO
The aim of this study was to develop a natural nonwoven layer made of cottonized bleached flax and cotton fibers which is suitable to replace one of the three polypropylene layers of face mask type II in order to reduce non-biodegradable waste production and limit the negative impact of used masks on the environment. The work focused on the design of a nonwoven structure based on properly blending cotton and flax fibers as well as ensuring the cover factor, which can support the mask's barrier properties against air dust particles and does not make breathing difficult. Additionally, a biodegradable film was developed to connect the nonwoven layer with the other polypropylene filtering layers. The effectiveness of the biodeterioration of the flax/cotton nonwoven was evaluated based on a test of the susceptibility of materials to the action of soil microorganisms. The flax/cotton nonwoven layer was tested in terms of mechanical, physical, and biophysical properties, and an analysis of the covering of the nonwoven surface with fibers was conducted as well. The results confirmed that the structure of flax/cotton nonwovens is suitable to replace the nondegradable polypropylene layer of the face mask type II to improve its environmental performance.
RESUMO
Global warming has led to a change in climatic conditions. Since 2006, drought has contributed to a reduction of food production and other agriculture-based products in many countries. The accumulation of greenhouse gases in the atmosphere has caused some changes in the composition of fruits and vegetables, making them less nutritious. To analyse this situation, a study was conducted on the effect of drought on the quality of fibres provided by the main fibre crops in Europe, namely flax (Linum usitatissimum). The experiment consisted of growing flax under controlled comparative conditions with designed different irrigation levels, such as 25%, 35% and 45% field soil moisture. Three varieties of flax were grown in 2019, 2020 and 2021 in the greenhouses of the Institute of Natural Fibres and Medicinal Plants in Poland. Fibre parameters, such as linear density, length and strength, were evaluated according to relevant standards. In addition, scanning electron microscope images of the cross-section and longitudinal view of the fibres were analysed. The results of the study indicated that deficiency of water during the flax growing season resulted in lowering of fibre linear density and tenacity.
RESUMO
Hemp fiber variety, Bialobrzeskie, contains phenolic acids in its chemical composition giving it inherent antioxidant and antibacterial activity. The use of this raw material in fabric manufacture allows the creation of functional clothing with a positive effect on human skin. The aim of the study was to develop biologically active functional clothing made of pure industrial hemp raw materials, where cannabidiol (CBD) extract applied on the fabric surface strengthened the fiber bioactivity. The design of the clothing technology was focused on keeping the hemp inherent properties on a steady level and avoiding the use of chemicals in each stage of the value chain from plant cultivation up to garment manufacture. The research covered the evaluation of phenolic acids content and The Ferric Ion Reducing Antioxidant Power FRAP antioxidant activity of the hemp fabric. The hemp fabric enriched with CBD was used for clothing preparation. The human trials covered wearing of the clothing by 15 volunteers for six weeks and evaluation of hemp garment effect on human skin. The skin parameters were tested twice, before and after six weeks of clothing wearing, according to the own methodology that included measurements of skin biophysical properties including tests of skin moisture, transepidermal water loss, and sebum. Also, the effect of the active substances present on the fabrics on the in vitro culture of human keratinocytes was evaluated. Results of the research proved, that the wearing of developed functional hemp clothing with CBD extracts applied on the fabric surface was safe and caused improvement of skin condition, which can have an influence on slowing down of skin aging. The invention covering the pure hemp functional clothing with hybrid bioactivity resulting from the joined activity of fiber and cannabidiol was applied for a patent, Patent Application No: P.438388, 2021.
RESUMO
Flax and hemp fibers are known as textile raw materials with pro-health properties. This paper presents results of research aimed at investigating the antioxidant activity of the fibers in order to explain a mechanism for the favorable influence of textiles made of these fibers when in contact with human skin. The study presents a new approach in evaluation of textile fibers in terms of their inherent pro-health properties. Antioxidant properties of flax and hemp fibers were tested with the use of FRAP and DPPH methods. The content of phenolic acids: syringic, sinapinic, p-coumaric and ferulic acid was determined with the use of HPLC. The results proved that the antioxidant activity of the tested fibers depends on a type and variety of fibrous plants, a method of fiber extraction and subsequent stages of preliminary processing of the fibers. Both decorticated flax and hemp fibers showed higher antioxidant activity in comparison to the fibers obtained with other extraction methods, while decorticated flax of different varieties presented the highest value of the FRAP. Wet methods of fiber extraction and processing caused reduction of phenolic acids content and significantly lower values of the FRAP and DPPH.
