Sensor-Based Detection of the Severity of Hyperkeratosis in the Teats of Dairy Cows.

The aim of this study was to evaluate whether the severity of hyperkeratosis (HK) in the teats of dairy cows can be assessed by a dielectric measurement. The study focused on surveying the occurrence of hyperkeratosis in a total of 241 teats of lactating dairy cows. A scoring system consisting of four categories was used to macroscopically assess the severity of HK. Additionally, the dielectric constant (DC) of all teats with milkability was measured in a double iteration with the MoistureMeterD (Delfin Technologies, Kuopio, Finland) on four different days. The Spearman rank correlation coefficient revealed a negative correlation between the DC and HK score (rs = -0.55 to -0.36). The results of the regression analysis showed that the DC values differed significantly between healthy teat ends (≤2) and teat ends with HK (≥3). Thus, the non-invasive measurement of DC provides a promising method of objectively assessing the occurrence and severity of HK.

The Use of a Pressure-Indicating Film to Determine the Effect of Liner Type on the Measured Teat Load Caused by a Collapsing Liner.

During milking the teat cup liner is the interface between the teat of a dairy cow and the milking system, so it should be very well adapted to the teat. Therefore, the aim of the present study was to determine the effect of liner type on the directly measuring teat load caused by a collapsing liner with a pressure-indicating film. The Extreme Low pressure-indicating film was used to detect the effect of six different liners on teat load. For each liner, six positions in the teat cup were specified, and six repetitions were performed for each position with a new piece of film each time. Analysis of variance was performed to detect differences between the six liners, the positions within a liner, and the measuring areas. The pressure applied to the teat by a liner depends on the technical characteristics of the liner, especially the shape of the barrel, and for all tested liners, a higher teat load was found at the teat end. In conclusion, with the help of pressure-indicating film, it is possible to determine the different effects of liner type by directly measuring teat load due to liner collapse.

The Usability of a Pressure-Indicating Film to Measure the Teat Load Caused by a Collapsing Liner.

Prevention of damage to the teat and mastitis requires determination of the teat load caused by a collapsing liner. The aim of this study was to test a pressure-indicating film designed to measure the pressure between a collapsing liner and artificial teats. The Ultra Super Low and the Extreme Low pressure-indicating films were tested on two types of artificial teat. The experiments were performed with a conventional milking cluster equipped with round silicone liners. For each teat and film type, 30 repetitions were performed. Each repetition was performed with a new piece of film. Kruskal-Wallis tests were performed to detect differences between the pressure values for the different teats. The area of regions where pressure-indication color developed was calculated to determine the most suitable film type. Both film types measured the pressure applied to both artificial teats by the teat cup liner. Thus, the pressure-indicating films can be used to measure the pressure between a collapsing liner and an artificial teat. Based on the results of the present investigation, a pressure-indicating film with the measurement ranges of both film types combined would be an optimal tool to measure the overall pressure between an artificial teat and a collapsing liner.

Development of a control system for the teat-end vacuum in individual quarter milking systems.

Progress in sensor technique and electronics has led to a decrease in the costs of electronic and sensor components. In modern dairy farms, having udders in good condition, a lower frequency of udder disease and an extended service life of dairy cows will help ensure competitiveness. The objective of this study was to develop a teat-end vacuum control system with individual quarter actor reaction. Based on a review of the literature, this system is assumed to protect the teat tissue. It reduces the mean teat-end vacuum in the maximum vacuum phase (b) to a level of 20 kPa at a flow rate of 0.25 L/min per quarter. At flow rates higher than 1.50 L/min per quarter, the teat-end vacuum can be controlled to a level of 30 kPa, because in this case it is desirable to have a higher vacuum for the transportation of the milk to the receiver. With this system it is possible for the first time to supply the teat end with low vacuum at low flow rates and with higher vacuum at increasing flow rates in a continuous process with a three second reaction-rate on individual quarter level. This system is completely automated.

Monitoring the body temperature of cows and calves using video recordings from an infrared thermography camera.

The aim of this study was to assess the variability of temperatures measured by a video-based infrared camera (IRC) in comparison to rectal and vaginal temperatures. The body surface temperatures of cows and calves were measured contactless at different body regions using videos from the IRC. Altogether, 22 cows and 9 calves were examined. The differences of the measured IRC temperatures among the body regions, i.e. eye (mean: 37.0 °C), back of the ear (35.6 °C), shoulder (34.9 °C) and vulva (37.2 °C), were significant (P < 0.01), except between eye and vulva (P = 0.99). The quartile ranges of the measured IRC temperatures at the 4 above mentioned regions were between 1.2 and 1.8 K. Of the investigated body regions the eye and the back of the ear proved to be suitable as practical regions for temperature monitoring. The temperatures of these 2 regions could be gained by the use of the maximum temperatures of the head and body area. Therefore, only the maximum temperatures of both areas were used for further analysis. The data analysis showed an increase for the maximum temperature measured by IRC at head and body area with an increase of rectal temperature in cows and calves. The use of infrared thermography videos has the advantage to analyze more than 1 picture per animal in a short period of time, and shows potential as a monitoring system for body temperatures in cattle.

The effects of quarter-individual milking in conventional milking parlours on the somatic cell count and udder health of dairy cows.

The objective of this study was to examine the quarter health status of quarter-individually and conventionally milked cows. The MultiLactor®, a quarter-individual milking system (MULTI), has single guided tubes which provide milking on the quarter level with a low system vacuum level (37 kPa), sequential pulsation and periodic air inlet. The conventional milking system (CON) was equipped with a milking cluster where the system vacuum level was adjusted to 40 kPa. A total of 84 German Holstein cows, randomly divided into two groups, were included in the study. Over a period of 32 trial weeks, quarter foremilk samples were taken every week to determine somatic cell count (SCC). Bacteriological examinations and udder palpation were conducted at three different times. During the trial period, median SCC of quarter foremilk samples in both groups did not exceed the threshold value of 100,000 cells/ml. The results of the F test showed that the milking system (P = 0.0587) and days in milk (DIM) (P = 0.8066) had no significant effects on the quarter health status. On the other hand, lactation (P = 0.0396), quarter health status in the previous week (P < 0.0001) and trial week (P = 0.0061) affected quarter health status significantly. The estimated probabilities of the occurrence of a suspicious quarter (SCC > 100,000 cells/ml) were 19.97% (CON) and 31.72% (MULTI). However, the test of differences in the Least Square Means (LSM) showed no significant differences (P = 0.0585) between CON and MULTI. The estimated probability of quarters becoming suspicious during the first lactation was 12.51% for both groups. With an increasing number of lactation, the probability of a quarter becoming suspicious clearly increased (2nd lactation: 32.73% and 3rd lactation: 36.19%). The results also showed that the percentage of quarters with bacteriological findings revealed a stronger increase over time for MULTI than for CON.

Behavioral and physiological responses of young horses to different weaning protocols: a pilot study.

In this study, effects of weaning on behavioral and physiological stress parameters in young horses (foals) were determined. Foals were weaned either simultaneously without the presence of adult horses (group A, n = 6), or in the presence of two adult females familiar but unrelated to the foals (group B, n = 5), or weaned consecutively by removing two mother horses per day (group C, n = 6). Behavior, locomotion, salivary cortisol concentration, beat-to-beat (RR) interval, heart rate variability (HRV) and weight were determined. Group A foals lost weight for 2 days (mean ± SEM) - 8.3 ± 1.6 kg, p < 0.05. Weaning was followed by increased vocalization which was least pronounced in foals of group B (p < 0.05). Locomotion was most pronounced on weaning day in foals of group A and lowest in group B (p < 0.05). Weaning increased salivary cortisol concentration on the day of weaning in groups A and B and for 2 days in group C (p < 0.05). The RR interval decreased most pronouncedly in group A foals (p < 0.05). There were no consistent changes in HRV. Based on cortisol release and behavior, weaning is associated with stress but this was least pronounced in foals weaned in the presence of two familiar but unrelated adult female horses.