Second Fundão Dam Rupture Science Meeting: Updating the science.

The second Fundão Dam Rupture Science Meeting was held in Ouro Preto, Minas Gerais, Brazil, on 21 and 22 September 2022. A total of 100 delegates attended the meeting, which featured high-quality oral presentations and posters over the two days and lively discussions of the science presented. The meeting resulted in nine papers being published in this special series. In the discussion, it was commented that the first meeting had been more a meeting of competitive perspectives but that the second meeting featured a more collaborative sharing of knowledge. Also, there had been substantial improvement in ways to deal with the lack of pre-event data and account for other stressors in the system, and as a result, stronger conclusions regarding the recovery rates of the system were able to be made. Importantly, there was no evidence for a feasible "time bomb" of a future catastrophic release of contaminants, but it was agreed that different scenarios continue to be researched. Integr Environ Assess Manag 2024;20:70-73. © 2023 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC).

Improving the Measurement of Iron(III) Bioavailability in Freshwater Samples: Methods and Performance.

The toxicity of iron(III) in fresh waters has been detected at concentrations above the iron solubility limit, indicating a contribution of colloidal and particulate forms of iron(III) to the toxicity response. Current water quality guideline values for iron in fresh water are based on analytical determinations of filterable or total iron. Filtration, however, can underestimate bioavailable iron by retaining some of the colloidal fraction, and total determinations overestimate bioavailable iron measurements by recovering fractions of low bioavailability from suspended solids (e.g., iron oxides and oxyhydroxides) naturally abundant in many surface waters. Consequently, there is a need for an analytical method that permits the determination of a bioavailable iron fraction, while avoiding false-negative and false-positive results. Ideally, a measurement technique is required that can be readily applied by commercial laboratories and field sampling personnel, and integrated into established regulatory schemes. The present study investigated the performance of pH 2 and pH 4 extractions to estimate a bioavailable iron(III) fraction in synthetic water samples containing iron phases of different reactivities. The effects of aging on fresh precipitates were also studied. The total recoverable, 0.45-µm filtered, and pH 4 extractable fractions did not discriminate iron phases and age groups satisfactorily. Contrastingly, the pH 2 extraction showed specificity toward iron phases and aging (0.5-2-h interval). Extraction times above 4 h and up to 16 h equally recovered >90% of the spiked iron regardless of its age. Furthermore, <1% of the well-mineralized iron was targeted. The present study shows that a pH 2 dilute-acid extraction is a suitable candidate method to operationally define iron fractions of higher bioavailability avoiding false-negative and false-positive results. Environ Toxicol Chem 2023;42:303-316. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

The Diffusive Gradients in Thin Films Technique Predicts Sediment Nickel Toxicity to the Amphipod Melita plumulosa.

The geographical shift of nickel mining to small island countries of the Southeast Asia and Melanesia region has produced a need to assess the environmental risk associated with increased sediment nickel exposure to benthic estuarine/marine biota. Chemical measurements of nickel concentration and potential bioavailability, including the use of diffusive gradients in thin films (DGT), were compared to effects on 10-d reproduction of the epibenthic estuarine/marine amphipod Melita plumulosa in nickel-spiked sediments and field-contaminated sediments with different characteristics. The 10% effect concentrations (EC10s) for amphipod reproduction ranged from 280 to 690 mg/kg total recoverable nickel, from 110 to 380 mg/kg dilute acid-extractable nickel, and from 34 to 87 µg Ni/m2 /h DGT-labile nickel flux. Nickel bioavailability was lower in sediments with greater total organic carbon, clay content, and percentage of fine particles. Measurements of DGT-labile nickel flux at the sediment-water interface integrated exposure to nickel from porewater, overlying water, and ingested sediment exposure pathways and were found to have the strongest relationship with the biological response. At most, there was a 29% reduction in 10-d M. plumulosa reproduction relative to the control when exposed to nickel from field-contaminated sediments collected from nickel laterite mining regions of New Caledonia. The DGT technique can be used as a complementary tool to measure the bioavailability of nickel in estuarine/marine sediments, especially sediments that are in nickel laterite mining regions where there are no or few toxicity data available for determining biological effects on local species. Based on the combined data set of the 3 nickel-spiked sediments a DGT-labile nickel EC10 threshold of 50 (30-69) µg Ni/m2 /h was determined. Environ Toxicol Chem 2021;40:1266-1278. © 2020 SETAC.

Comparing trace metal bioaccumulation characteristics of three freshwater decapods of the genus Macrobrachium.

Potential sources and kinetics of metal bioaccumulation by the three Macrobrachium prawn species M. australiense, M. rosenbergii and M. latidactylus were assessed in laboratory experiments. The prawns were exposed to two scenarios: cadmium in water only; and exposure to metal-rich mine tailings in the same water. The cadmium accumulation from the dissolved exposure during 7 days, followed by depuration in cadmium-free water for 7 days, was compared with predictions from a biokinetic model that had previously been developed for M. australiense. M. australiense and M. latidactylus accumulated significant tissue cadmium during the exposure phase, albeit with different uptake rates. All three species retained >95% of the bioaccumulated cadmium during the depuration phase, indicating very slow efflux rates. Following exposure to tailings, there were significant (p<0.05) differences in tissue arsenic, cadmium, lead and zinc concentrations among species. Cadmium and zinc concentrations were increased relative to controls for all three species but were not different between treatments (direct/indirect contact with tailings), suggesting these metals were primarily accumulated via the dissolved phase. All species bioaccumulated significantly greater arsenic and lead when in direct contact with mine tailings, demonstrating the importance of an ingestion pathway for these metals. Copper was not bioaccumulated above control concentrations for any species. The differences between the metal accumulation of the three prawns indicated that a biokinetic model of cadmium bioaccumulation for M. australiense could potentially be used to describe the metal bioaccumulation of the other two prawn species, albeit with an over-prediction of 3-9 times. Despite these being the same genus of decapod crustacean, the study highlights the issues with using surrogate species, even under controlled laboratory conditions. It is recommended that future studies using surrogate species quantify the metal bioaccumulation characteristics of each species in order to account for any differences between species.

Bioaccumulation and retention kinetics of cadmium in the freshwater decapod Macrobrachium australiense.

The potential sources and mechanisms of cadmium bioaccumulation by the native freshwater decapods Macrobrachium species in the waters of the highly turbid Strickland River in Papua New Guinea were examined using (109)Cd-labelled water and food sources and the Australian species Macrobrachium australiense as a surrogate. Synthetic river water was spiked with environmentally relevant concentrations of cadmium and animals were exposed for 7 days with daily renewal of test solutions. Dietary assimilation of cadmium was assessed through pulse-chase experiments where prawns were fed separately (109)Cd-labelled fine sediment, filamentous algae and carrion (represented by cephalothorax tissue of water-exposed prawns). M. australiense readily accumulated cadmium from the dissolved phase and the uptake rate increased linearly with increasing exposure concentration. A cadmium uptake rate constant of 0.10 ± 0.05 L/g/d was determined in synthetic river water. During depuration following exposure to dissolved cadmium, efflux rates were low (0.9 ± 5%/d) and were not dependent on exposure concentration. Assimilation efficiencies of dietary sources were comparable for sediment and algae (48-51%), but lower for carrion (28 ± 5%) and efflux rates were low (0.2-2.6%/d) demonstrating that cadmium was well retained by M. australiense. A biokinetic model of cadmium accumulation by M. australiense predicted that for exposures to environmentally relevant cadmium concentrations in the Strickland River, uptake from ingestion of fine sediment and carrion would be the predominant sources of cadmium to the organism. The model predicted the total dietary route would represent 70-80% of bioaccumulated cadmium.

Challenges in understanding the sources of bioaccumulated metals in biota inhabiting turbid river systems.

Bioaccumulation of As, Cd, Cu, Pb and Zn by Macrobrachium prawns was observed to occur in the Strickland River downstream of a gold mine at Porgera, Papua New Guinea. This was despite the total metal concentrations of waters and sediments indicating no difference from reference sites within tributaries. To provide information on potential sources and bioavailability of metals to prawns, an extensive range of analyses were made on waters, suspended solids, deposited sediments and plant materials within the river system. Dissolved metal concentrations were mostly sub-micrograms per liter and no major differences existed in concentrations or speciation between sites within the Strickland River or its tributaries. Similarly, no differences were detected between sites for total or dilute acid-extractable metal concentrations in bed sediments and plant materials, which may be ingested by the prawns. However, the rivers in this region are highly turbid and the dilute acid-extractable cadmium and zinc concentrations in suspended solids were greater at sites in the Strickland River than at sites in tributaries. The results indicated that mine-derived inputs increased the proportion of these forms of metals or metalloids in the Strickland River. These less strongly bound metals and metalloids would be more bioavailable to the prawns via the dietary pathway. The results highlighted many of the difficulties in using routine monitoring data without information on metal speciation to describe metal uptake and predict potential effects when concentrations are low and similar to background. The study indicated that the monitoring of contaminant concentrations in organisms that integrate the exposure from multiple exposure routes and durations may often be more effective for detecting impacts than intermittent monitoring of contaminants in waters and sediments.

Challenges with tracing the fate and speciation of mine-derived metals in turbid river systems: implications for bioavailability.

The fast-flowing and highly turbid Lagaip River (0.5-10 g/L suspended solids) in the central highlands of Papua New Guinea receives mine-derived metal inputs in both dissolved and particulate forms. Nearest the mine, metal concentrations in suspended solids were 360, 9, 90, 740 and 1,300 mg/kg for As, Cd, Cu, Pb and Zn, while dissolved concentrations were 2.7, 0.6, 3.1, 0.1 and 25 µg/L, respectively. This creates a significant metal exposure source for organisms nearer the mine. However, because the Lagaip River is diluted by a large number of tributaries, the extent to which mine-derived metals may affect biota in the lower catchments is uncertain. To improve our understanding of the forms of potentially bioavailable metals entering the lower river system, we studied the partitioning and speciation of metals within the Lagaip River system. Dissolved and particulate metal concentrations decreased rapidly downstream of the mine due to dilution from tributaries. As a portion of the particulate metal concentrations, the more labile dilute acid-extractable forms typically comprised 10-30% for As and Pb, 50-75% for Cu and Zn, and 50-100% for Cd. Only dissolved Cd, Cu and Zn remained elevated relative to the non-mine-impacted tributaries (<0.03, 0.5 and 0.3 µg/L), but the concentrations did not appreciably change with increasing dilution downriver. This indicated that release of Cd, Cu and Zn was likely occurring from the more labile metal phases of the mine-derived particulates. Chelex-labile metal analyses and speciation modelling indicated that dissolved copper and lead were largely non-labile and likely complexed by naturally occurring organic ligands, while dissolved cadmium and zinc were predominantly present in labile forms. The study confirmed that mine-derived particulates may represent a significant source of dissolved metals in the lower river system; however, comparison with water quality guidelines indicates the low concentrations would not adversely affect aquatic life.

The mathematical properties of the quasi-chemical model for microorganism growth-death kinetics in foods.

Knowledge of the mathematical properties of the quasi-chemical model [Taub, Feeherry, Ross, Kustin, Doona, 2003. A quasi-chemical kinetics model for the growth and death of Staphylococcus aureus in intermediate moisture bread. J. Food Sci. 68 (8), 2530-2537], which is used to characterize and predict microbial growth-death kinetics in foods, is important for its applications in predictive microbiology. The model consists of a system of four ordinary differential equations (ODEs), which govern the temporal dependence of the bacterial life cycle (the lag, exponential growth, stationary, and death phases, respectively). The ODE system derives from a hypothetical four-step reaction scheme that postulates the activity of a critical intermediate as an antagonist to growth (perhaps through a quorum sensing biomechanism). The general behavior of the solutions to the ODEs is illustrated by several examples. In instances when explicit mathematical solutions to these ODEs are not obtainable, mathematical approximations are used to find solutions that are helpful in evaluating growth in the early stages and again near the end of the process. Useful solutions for the ODE system are also obtained in the case where the rate of antagonist formation is small. The examples and the approximate solutions provide guidance in the parameter estimation that must be done when fitting the model to data. The general behavior of the solutions is illustrated by examples, and the MATLAB programs with worked examples are included in the appendices for use by predictive microbiologists for data collected independently.

Microbiological Safety of Radappertized Beef 1.

To assure microbiological safety and stability of irradiated meats, inoculated pack studies are performed with each meat. These studies are designed to provide partial spoilage data for computation of that dose required to reduce the number of viable spores of a single most resistant strain of Clostridium botulinum by 12 log cycles. A beef inoculated pack had only one significant partial spoilage "point" at 22 kGy. Therefore, the binomial confidence limit method was used to compute a 12D dose of 41.2 kGy. This 12D dose, together with a prveious thermal treatment of inactivate autolytic enzymes, provides a wide margin of microbiological safety and stability to packaged meats stored without refrigeration.

Cryogenic gamma irradiation of prototype pork and chicken and antagonistic effect between Clostridium botulinum types A and B.

Inoculated, irradiated pork (2,300 cans) and chicken (2,000 cans) pack studies were performed to establish the 12D dose for these foods. Each can was inoculated with a mixture of 10(6) spores of each of 10 strains of Clostridium botulinum (five type A and five type B), or a total of 10(7) spores. The cans received a series of increasing doses of gamma rays (60Co) at -30 +/- 10 degrees C; they were incubated for 6 months at 30 +/- 2 degrees C and examined for swelling, toxicity, and recoverable botulinal cells. The highest rate of swelling for both foods occurred within the first week of incubation, and maximum swelling was observed within 4 to 5 weeks. The minimal experimental sterilizing dose (ESD) based on flat, nontoxic sterile cans was 3.0 less than ESD less than or equal to 3.2 Mrad for pork and 4.0 less than ESD less than or equal to 4.2 Mrad for chicken. An analysis of the partial spoilage data by extreme-value statistics indicated with 90% confidence that the rate of spore death in the two foods was not a normal distribution, but appeared to favor a shifted exponential function. Based on the latter distribution, and assuming one most resistant strain in the mixture of 10 used, the 12D dose computed to 4.37 Mrad, with a shoulder of 0.11 Mrad, for pork and to 4.27 Mrad, with a shoulder of 0.51 Mrad, for chicken. An assumption that there were two or more most resistant strains in the inoculum progressively lowered the 12D dose. There was an apparent antagonism between the irradiated type A and B viable strains in the two foods. Cans with type B cells and toxin predominated over cans with type A cells and toxin, but cans with a mixture of type A and B toxins predominated over cans with a mixture of Type A and B cells. At the highest sublethal doses, only type A cells survived in pork, but in chicken there was a least one type B strain that was at least as resistant as type A strains.

Low-temperature irradiation of beef and methods of evaluation of radappertization process.

An inoculated, irradiated beef pack (1,240 cans) was conducted for the determination of microbiological safety for unrestricted human consumption. Each can contained a mixture of 10(6) spores of each of 10 strains of Clostridium botulinum (5 type A and 5 type B), or a total of 10(7) spores/can. The cans were irradiated to various doses (100 cans/dose) with 60Co gamma rays at -30 +/- 10 C, incubated at 30 +/- 2 C for 6 months, and examined for swelling, toxicity, and recoverable botulinal cells. The minimal experimental sterilizing dose based on nonswollen, nontoxic sterile cans were 2.2 less than experimental sterilizing dose based on nonswollen, nontoxic sterile cans was 2.2 less than experimental sterilizing dose less than or equal to 2.6 Mrad. Using recoverable cells as the most stringent criterion of spoilage, and assuming the conventional simple exponential (without an initial shoulder) rate of spore kill, the "12D" dose was 3.7 Mrad when estimated on the basis of mixture of 10 strains totaling 10(7) spores/can, and 4.3 Mrad if it is assumed that each can of beef contained 10(6) spores of a single most resistant strain and all of these spores were of identical resistances. However, an analysis of the data by extreme value statistics indicated with 90% confidence that the spore death rate was not a simple exponential but might be a shifted exponential (with an initial shoulder), Weibull, lognormal, or normal, with a "12D" equivalent of about 3.0 Mrad regardless of the initial spore density per can. There was an apparent antagonism between the irradiated type A and B strains in the cans. Some of the cans contained type B toxin but did not include type B viable cells. Other cans had a mixture of type A and B toxins, but a large number of these cans did not yield recoverable type B cells. However, type A viable cells could always be demonstrated in those cans containing type A toxin.

Evaluation of media, time and temperature of incubation, and method of enumeration of several strains fo Clostridium perfringens spores.

Two basal media, containing the ingredients found in common in both SPS (BBL) and TSN (BBL) media and in the previously described media of Schaedler et al. (1965) and Starr et al (1971), but minus antibiotics, were selected as the most suitable for the enumeration of Clostridium perfringens spores in a model system. These media were also used to study the influence of the presence of glucose, xylose, or ribose in various concentrations (0, 0.01, 0.1, and 1.0%) on colony morphology and spore recovery. As the sugar concentration in the basal agar medium increased, the colonies of all the test organisms also increased in size, and more of the black colonies became white in color. At the 1.0% sugar level, glucose permitted only white colony development, whereas the pentoses were completely inhibitory. Both pour plates and most-probable-number tubes were inoculated with the spores of several strains of C. perfringens and incubated at 20, 30, 37, and 45 C for 24, 48, and 72 h. Statistical analyses of the enumeration data indicated, at the 99% confidence level, that a Trypticase(BBL)-yeast extract-glucose-sulfite-iron agar gave maximal population estimates at 37 C in 72 h.