Colonized beads as inoculum for marine biodegradability assessment: application to linear alkylbenzene sulfonate.

An innovative biodegradation test system was developed in order to fill the current gap for cost effective and environmentally relevant tools to assess marine biodegradability. Glass beads were colonized by a biofilm in an open flow-through system of seawater with continuous pre-exposure to Linear Alkylbenzene Sulfonate (LAS) (20 microg/L). Thereafter, such colonized beads were added as inoculum in different test systems. [(14)C]-LAS (5-100 microg/L) was added and primary and ultimate biodegradation were assessed. The bacterial density collected on the beads (10(9) bact./mL beads) was ca. 3 orders of magnitude higher than the typical seawater content. The LAS mineralization lag phase duration decreased from 55 to <1 days and the mineralization extent increased from 53 to 90% as the colonized beads volume increased from 10 to 275 mL. This is the first demonstration of marine bacteria's ability to mineralize LAS. On the opposite, less than 13% LAS was mineralized in seawater only. The colonized beads possibly enhanced the probability to encounter the full degraders' consortium in a low volume of seawater (100 mL).

Germination and seedling growth of the water cress Rorippa sp. exposed to the chelant [S,S]-EDDS.

With the implementation of the new EU environmental framework directives, high tier risk assessments of chemicals will be increasingly needed. For high production chemicals, additional tests will complement the standard battery for aquatic toxicity assessments (daphnids, algae, and fish). In the context of a new chemical notification at the European Union level, we have developed a seed germination and root elongation toxicity test with the freshwater aquatic plant Rorippa nasturtium-aquaticum (water cress) to confirm the low environmental risk of the chelant [S,S]-EDDS. A 14 day semi-static growth inhibition test was conducted with daily renewal of the test solution. No concentration related inhibition was found on the basis of any of the criteria investigated, i.e., time and extent of germination, biomass, number of leaves, stalk and root lengths. The no-observed effect concentration was considered to be >or=387 mg SS-EDDS/l. Although germination was selected as an appropriate endpoint to assess the effect of a chelant on an aquatic plant (other endpoints would have been dependant on essential metals that are chelated in standard culture tests), the absence of dose related effects requires further tests with higher exposure concentrations and/or other toxicant(s) to assess the validity of the test as a general tool for aquatic risk assessment.

Removal of fragrance materials during U.S. and European wastewater treatment.

The concentrations and removals of 16 fragrance materials (EMs) were measured in 17 U.S. and European wastewater treatment plants between 1997 and 2000 and were compared to predicted values. The average FM profile and concentrations in U.S. and European influent were similar. The average FM profile in primary effluent was similar to the average influent profile; however, the concentration of FMs was reduced by 14.6-50.6% in primary effluent. The average FM profile in final effluent was significantly different from the primary effluent profile and was a function of the design of the wastewater treatment plant. In general, the removal of sorptive, nonbiodegradable FMs was correlated with the removal of total suspended solids in the plant, while the removal of nonsorptive, biodegradable FMs was correlated with 5-day Biological Oxidation Demand removal in the plant. The overall plant removal (primary + secondary treatment) of FMs ranged from 87.8 to 99.9% for activated sludge plants, 58.6-99.8% for carousel plants, 88.9-99.9% for oxidation ditch plants, 71.3-98.6% for trickling filter plants, 80.8-99.9% for a rotating biological contactor plant, and 96.7-99.9% for lagoons. The average concentration of FMs in final effluent ranged from the limit of quantitation (1-3 ng/L) to 8 microg/L. Measured FM removal and concentrations were compared to predicted values, which were based on industry volume, per capita water use, octanol-water partition coefficient, and biodegradability.