Using a low melting solvent mixture to extract value from wood biomass.

Green chemistry, sustainability and eco-efficiency are guiding the development of the next generation of industrial chemical processes. The use of non-edible lignocellulosic biomass as a source of chemicals and fuels has recently raised interest due to the need for an alternative to fossil resources. Valorisation mainly focuses on cellulose, which has been used for various industrial scale applications for decades. However, creating an economically more viable value chain would require the exploitation of the other main components, hemicellulose and lignin. Here, we present a new low melting mixture composition based in boric acid and choline chloride, and demonstrate its efficiency in the fractionation of wood-based biomass for the production of non-condensed lignin, suitable for further use in the search for sustainable industrial applications, and for the selective conversion of hemicelluloses into valuable platform chemicals.

Impact of steam explosion on the wheat straw lignin structure studied by solution-state nuclear magnetic resonance and density functional methods.

Chemical changes of lignin induced by the steam explosion (SE) process were elucidated. Wheat straw was studied as the raw material, and lignins were isolated by the enzymatic mild acidolysis lignin (EMAL) procedure before and after the SE treatment for analyses mainly by two-dimensional (2D) [heteronuclear single-quantum coherence (HSQC) and heteronuclear multiple-bond correlation (HMBC)] and (31)P nuclear magnetic resonance (NMR). The ß-O-4 structures were found to be homolytically cleaved, followed by recoupling to ß-5 linkages. The homolytic cleavage/recoupling reactions were also studied by computational methods, which verified their thermodynamic feasibility. The presence of the tricin bound to wheat straw lignin was confirmed, and it was shown to participate in lignin reactions during the SE treatment. The preferred homolytic ß-O-4 cleavage reaction was calculated to follow bond dissociation energies: G-O-G (guaiacyl) (69.7 kcal/mol) > G-O-S (syringyl) (68.4 kcal/mol) > G-O-T (tricin) (67.0 kcal/mol).

Analysis of mono- and oligosaccharides in ionic liquid containing matrices.

Ionic liquids (ILs), that is, salts with melting points <100°C, have recently attracted a lot of attention in biomass processing due to their ability to dissolve lignocellulosics. In this work, we studied how two imidazolium-based, hydrophilic, cellulose dissolving ionic liquids 1,3-dimethylimidazolium dimethylphosphate [DMIM]DMP and 1-ethyl-3-methylimidazolium acetate [EMIM]AcO affect the usually employed analytical methods for mono- and oligosaccharides, typical products from hydrolytic treatments of biomass. HPLC methods were severely hampered by the presence of ILs with loss of separation power and severe baseline problems, making their use for saccharide quantification extremely challenging. Problems in DNS photometric assay and chromatography were also encountered at high ionic liquid concentrations and many capillary electrophoresis (CE) methods did not allow an efficient analysis of saccharides in these matrices. In this paper we describe an optimized CE method with pre-column derivatization for the qualitative and quantitative analysis of mono- and oligosaccharides in sample matrices containing moderate (20-40% (v/v)) concentrations of ILs. The IL content and type in the sample matrix was found to affect both peak shape and quantification parameters. Generally, the presence of high IL concentrations (≥20% (v/v)) had a dampening effect on the detection of the analytes. IL in lower concentrations of <20% (v/v) was, however, found to improve peak shape and/or separation in some cases. The optimized CE method has good sensitivity in moderate concentrations of the ionic liquids used, with limits of detection of 5mg/L for cellooligomers up to the size of cellotetraose and 5-20mg/L for cellopentaose and cellohexaose, depending on the matrix. The method was used for analysing the action of a commercial ß-glucosidase in ILs and for analysing saccharides in the IL containing hydrolysates from the hydrolysis of microcrystalline cellulose with Trichoderma reesei endoglucanase Cel5A. According to the results, [DMIM]DMP and [EMIM]AcO] showed clear differences in enzyme inactivation.

Inhibitory effect of lignin during cellulose bioconversion: the effect of lignin chemistry on non-productive enzyme adsorption.

The effect of lignin as an inhibitory biopolymer for the enzymatic hydrolysis of lignocellulosic biomass was studied; specially addressing the role of lignin in non-productive enzyme adsorption. Botanical origin and biomass pre-treatment give rise to differences in lignin structure and the effect of these differences on enzyme binding and inhibition were elucidated. Lignin was isolated from steam explosion (SE) pre-treated and non-treated spruce and wheat straw and used for the preparation of ultrathin films for enzyme binding studies. Binding of Trichoderma reesei Cel7A (CBHI) and the corresponding Cel7A-core, lacking the linker and the cellulose-binding domain, to the lignin films was monitored using a quartz crystal microbalance (QCM). SE pre-treatment altered the lignin structure, leading to increased enzyme adsorption. Thus, the positive effect of SE pre-treatment, opening the cell wall matrix to make polysaccharides more accessible, may be compromised by the structural changes of lignin that increase non-productive enzyme adsorption.

Determination of the carboxylic acids in acidic and basic process samples by capillary zone electrophoresis.

Capillary zone electrophoresis (CZE) with indirect UV detection was used in developing a method for the simultaneous determination of inorganic anions, aliphatic and heterocyclic organic acids in various processed samples. The analytes were determined simultaneously in 10 min using an electrolyte containing 20mM 2,3-pyrazine dicarboxylic acid, 65mM tricine, 2mM BaCl(2), 0.5mM cetyltrimethylammonium bromide, and 2M urea at pH 8.06. Linear plots for the analytes were obtained in the concentration range of 2-150 mg L(-1). Relative standard deviations (RSDs) of peak areas during a 3-day analysis period varied from 5.5% for glycolate to 9.5% for oxalate. RSDs of migration times varied between 0.4% and 1.1%. The detection limit (at S/N 3) was 1 mg L(-1) for all the analytes studied. The proposed method was successfully demonstrated for the determination of carboxylic acids in eight oxygen treated samples of commercial softwood and hardwood kraft lignin and two red wine samples of Pinot Noir grapes. In the kraft lignin samples the concentrations of carboxylic acids correspond to the oxidation time. The acid concentrations of wine varied considerable.

Determination of monosaccharide composition in plant fiber materials by capillary zone electrophoresis.

The neutral sugar composition of acid hydrolyzed extracts of cellulose fiber samples, i.e. oat spelt, wheat straw, thermomechanica pulp (TMP) made of spruce, aspen stemwood, and bleached birch kraft pulp, was determined by a new capillary zone electrophoresis (CZE) method employing an alkaline background electrolyte. The method relies on in-capillary reaction and direct UV detection at wavelength 270 nm. Neutral carbohydrates D-(+)-galactose, D-(+)-glucose, L-rhamnose, D-(+)-mannose, D-(-)-arabinose, and D-(+)-xylose were simultaneously separated. The calibration plots were linear over a range from 10 to 150 mg/L for D-(+)-galactose, L-rhamnose, D-(+)-mannose, and D-(-)-arabinose and from 50 to 400mg/L for D-(+)-glucose and D-(+)-xylose. Relative standard deviations (RSDs) of peak areas during a 5-day analysis period varied from 3.3% for galactose to 11.8% for rhamnose. RSDs of migration times varied between 0.3 and 0.7%. The detection limit (at S/N 3) was 5mg/L for each monosaccharide. The results obtained by CZE agreed well with results obtained by high-performance anion-exchange chromatography. Glucose and xylose were the two predominant monosaccharides in the plants, except in the spruce TMP sample where glucose and mannose dominated.

Microscale immunoaffinity SPE and MEKC in fast determination of testosterone in male urine.

Conventional methods for the determination of testosterone in body fluids typically suffer from poor recovery, lack of specificity, complex sample pretreatment, or the need for derivatization. Here, a simple, specific, and fast analysis method for testosterone was developed, with a methodology based on testosterone-specific immunoaffinity SPE (IA-SPE) and subsequent analysis by partial filling MEKC (PF-MEKC). An immunosorbent consisting of a recombinant antitestosterone Fab fragment covalently attached to activated Sepharose was prepared. IA-SPE and PF-MEKC were set up in hyphenated and off-line constructions, and the applicability of the two constructions in analysis of testosterone in male urine was investigated. The results obtained with the hyphenated construction proved to be only indicative of the presence of testosterone. The off-line IA-SPE and PF-MEKC construction, however, was successfully used in the determination of free testosterone in male urine samples after enzymatic hydrolysis of the glucuronide conjugates. Except for the hydrolysis reaction, no sample pretreatment was required. After hydrolysis, the overall analysis time per sample was only 14 min. The off-line IA-SPE and PF-MEKC method proved to be robust, sensitive (LOQ 35 mug/L), and specific, enabling separation of testosterone from four related steroids. Thus, it provides attractive features when compared to traditional methods for determination of testosterone in male urine.

Determination of neutral carbohydrates by CZE with direct UV detection.

A new CZE method relying on in-capillary reaction and direct UV detection at the wavelength 270 nm is presented for the simultaneous separation of the neutral carbohydrates xylitol, D-(-)-mannitol, sucrose, D-(+)-fucose, D-(+)-cellobiose, D-(+)-galactose, D-(+)-glucose, L-rhamnose, D-(+)-mannose, D-(-)-arabinose, D-(+)-xylose, and D-(-)-ribose. The alkaline electrolyte solution was prepared of 130 mM sodium hydroxide and 36 mM disodium hydrogen phosphate dihydrate. Separation of the sample mixture was achieved within 35 min. Calibration plots were linear in the range of 0.05-3 mM. Reproducibility of migration times was between 0.3 and 1.1%, and the detection limits for the analytes were 0.02 and 0.05 mM. The optimized method was applied for the determination of neutral monosaccharides in lemon, pineapple, and orange juices and a cognac sample. The methodology is fast since no other sample preparation except dilution is required.

Design and fabrication of integrated solid-phase extraction-zone electrophoresis microchip.

Integrated solid-phase extraction-zone electrophoresis (SPE-ZE) device has been designed and fabricated on microchip. The structures were fabricated by using multiple layers of SU-8 polymer with a novel technique that enables easy alignment and high yield of the chips. SU-8 adhesive bonding has two major advantages: it enables bonding of high aspect ratio pillars and it results in fully SU-8 microchannels with uniform electrokinetic flow properties. The SPE-ZE device has a fluidic reservoir with 15:1 high aspect ratio pillars for bead filters that act as a SPE part in the chip structure. The separation unit is a 25 mm long electrophoresis channel starting from the outlet of SPE reservoir. Argon laser-induced fluorescence (LIF) detector was used to monitor simultaneously the SPE reservoir and the detection site at the end of the electrophoresis channel. Flow characteristics and electric field distributions were simulated with Femlab software. Fluorescein was used as the analyte for detecting the operational performance of the chip. Adsorption, bead rinsing, elution and detection were tested to verify functioning of the chip design.

Process control and drug analysis with an on-line capillary electrophoresis system.

Inorganic and organic ions in pulp and paper process waters and drug mixtures were studied. Real-time measurements and on-line simulated analyses were made. A novel on-line capillary electrophoresis instrument equipped with a fixed wavelength UV detector having a 254-nm filter was used for the analyses. Three dynamic sample and electrolyte micromodules provided on-line sampling, sample introduction and solution feedings. The system was used to monitor process samples containing thiosulphate, chloride, sulphate, oxalate, acetate and carbonate. It approved good performance in separation of ethacrynic acid, furosemide, probenecid, bumetanide and hydrochlorothiazide as well as that of normethanephrine, methanephrine and dopamine standard mixtures. The LOD and LOQ values of the ions and drugs ranged from 0.1 to 1 mg/l for LOD and from 1 to 10 mg/l for LOQ. Sensitivity of the drugs was higher due to the single wavelength available in the system. It required that the drugs were to be identified by indirect UV detection. Repeatability of the analyses was good (RSD% below 5).

Analysis of anabolic steroids by partial filling micellar electrokinetic capillary chromatography and electrospray mass spectrometry.

A partial filling micellar electrokinetic capillary chromatography (PF-MEKC) separation of six anabolic androgenic steroids (androstenedione, metandienone, fluoxymesterone, methyltestosterone, 17-epimetandienone and testosterone) is introduced. The method utilises a mixed micellar solution consisting of sodium dodecyl sulphate (SDS) and sodium taurocholate. The analytes are detected with a photodiode array detector at 247 nm wavelength. Methyltestosterone is used as internal standard. The detection limits were 39 microg/L for androstenedione, 40 microg/L for testosterone, 45 microg/L for fluoxymesterone, 45-90 microg/L for 17-epimetandienone, 59 microg/L for methyltestosterone and 90 microg/L for metandienone. Linear correlation between concentration (0.1-5.0 mg/L) and detector response was obtained with r2 of 0.994 for fluoxymesterone, 0.998 for 17-epimetandienone and 0.999 for androstenedione, metandienone and testosterone. In addition, ionisation of the investigated compounds in electrospray mass spectrometry (ESI-MS) was studied in positive ion mode. The most intense signal (100%) was the protonated molecular ion [M + H]+, except for 17-epimetandienone, which gave its strongest signal at m/z corresponding to [M - H2O + H]+. Finally, separation and identification of fluoxymesterone, androstenedione and testosterone by PF-MEKC-ESI-MS is described. This is the first use of PF-MEKC and PF-MEKC-ESI-MS assays for anabolic androgenic steroids.

On-line process monitoring of water-soluble ions in pulp and paper machine waters by capillary electrophoresis.

In this study, capillary electrophoresis (CE) was used for separation of inorganic and organic ions from waters of paper and paperboard machines at mills. The instrument was constructed for on-line measurements by building a batch-type sample feeding unit. Chloride, thiosulphate, sulphate, oxalate, sulphite, hydrogen sulphide, formate, carbonate, phosphate and acetate in the process water samples were separated using an ion-specific separation system in CE with dicarboxylic acid buffer (pH 8.2), with pyridinium-2,3-dicarboxylic acid modified with commercial NICE-Pak OFM-OH solution (pH 12.0) or with a cetyltrimethylammonium bromide solution modified with chromate (pH 10.6). In addition, Analis CEofix Anions 8 electrolyte solution was tested in on-line studies at mills. It allowed 5 min separation time for the anions. Aluminium was determined at pH 3.6 in 10 min by using a laboratory-made imidazole buffer modified with 18-crown 6-ether. The developed CE systems were used to monitor the concentrations of sulphur species in dithionite degradation, to estimate corrosion degree in the water tanks, to monitor formaldehyde as the biocide chemical in wire washing and, in general, to observe process disturbances resulting from chemical feedings and their sites. The CE combination was on-line coupled to eight different process machines for continuous monitoring of concentrations for periods between two weeks and one month at paper and pulp mills in Finland.