Early feed restriction of lambs modifies ileal epimural microbiota and affects immunity parameters during the fattening period.

Bacteria firmly attached to the gastrointestinal epithelium during the pre-weaning phase may show a significant impact on nutrient processing, immunity parameters, health and feed efficiency of lambs during post-weaning phases. Thus, the aim of this study was to describe the differences in the ileal epimural microbiota (e.g. total bacteria, Prevotella spp., Bifidobacterium spp. and Lactobacillus spp.) of fattening lambs promoted by early feed restriction during the suckling phase trying to elucidate some of the underlying mechanisms behind changes in feed efficiency during the fattening period. A total of 24 Merino lambs (average BW 4.81±0.256 kg) were used, 12 of them (ad libitum, ADL) kept permanently in individual pens with their mothers, whereas the other 12 lambs were separated from their dams for 9 h each day to be exposed to milk restriction (RES). After weaning (BW=15 kg) all the animals were penned individually, offered the same complete pelleted diet (35 g/kg BW per day) and slaughtered at a BW of 27 kg. During the fattening period, reduced gain : feed ratio (0.320 v. 0.261, P<0.001) was observed for the RES group. Moreover, increments of Prevotella spp. were detected in the ileal epimural microbiota of RES lambs (P<0.05). There were also higher numbers of infiltrated lymphocytes (T and B cells) in the ileal lamina propria (P<0.05), a higher M-cell labelling intensity in ileal Peyer's patches domes (P<0.05) and a trend towards a thickening of the submucosa layer when compared with the ADL group (P=0.057). Some other immunological parameters, such as an increased immunoglobulin A (IgA) production (pg IgA/µg total protein) and increments in CD45+ cells were also observed in the ileum of RES group (P<0.05), whereas transforming growth factor ß and toll-like receptor gene expression was reduced (P<0.05). In conclusion, early feed restriction during the suckling phase promoted changes in ileal epimural microbiota and several immunity parameters that could be related to differences in feed efficiency traits during the fattening period of Merino lambs.

Adsorption of heavy metals onto sewage sludge-derived materials.

Two materials were produced from sewage sludge by: (1) pyrolysis of dried sewage sludge (PS); (2) chemical activation of dried sewage sludge with ZnCl(2) followed by pyrolysis (AS). The aim was to study the application of these materials for metal purification from water and to determine the efficiency of each material. Although AS displayed higher capacity, both PS and AS were able to adsorb these metals and the preferential order was equal: Hg(II)>Pb(II)>Cu(II)>Cr(III). For each metal-adsorbent pair, metal adsorption was highly pH dependent. In all cases the equilibrium was well described both by the Langmuir and the Freundlich isotherms. At the corresponding optimum pH, AS showed the following adsorption capacities: 175.4, 64.1, 30.7 and 15.4 mg/g of Hg(II), Pb(II), Cu(II) and Cr(III), respectively. These results indicate the potential application of these sewage sludge based adsorbents for the treatment of metal polluted effluents.

Activated carbons from sewage sludge and discarded tyres: production and optimization.

This is a study about making use of two residual materials such as sludges from a sewage treatment plant and discarded tyres to generate activated carbons and later optimize the production process. H2SO4 and ZnCl2 were used as chemical activating agents. Liquid-phase adsorption tests were made using the produced carbons to retain methylene blue and iodine. The best precursor was sludge activated with ZnCl2. After optimization studies, the best production methodology involved a 1:1 ratio of sludge and ZnCl2, a heating rate of 5 degrees C/min up to 650 degrees C and a residence time of 5 min. The resulting materials adsorbed up to 139.4 mg/g of methylene blue and 1358.5 mg/g of iodine. Nevertheless these carbons may leach Zn while using. To avoid this two treatments were carried out: one consisting of a coating with a polymer and another involving an intensive washing, which was seen to be more efficient.

Dye adsorption by sewage sludge-based activated carbons in batch and fixed-bed systems.

The present research work deals with the production of activated carbons by chemical activation and pyrolysis of sewage sludges. The adsorbent properties of these sewage sludges based activated carbons were studied by liquid-phase adsorption tests. Dyes removal from colored wastewater being a possible application for sludge based adsorbents, methylene blue and saphranine removing from solution was studied. Pure and binary adsorption assays were performed in batch and fixed bed systems. In all cases studied, the adsorbents produced from sewage sludges were able to adsorb both the compounds considered here. Nevertheless, time required for reaching equilibrium, adsorptive capacity and fixed bed characteristic parameters were different for these two compounds. Methylene blue adsorption occurred faster than that of saphranine, and it was preferably adsorbed when treating binary solutions. It could be concluded that the sewage sludge-based activated carbons may be promising for dyes removal from aqueous streams.