Graphene-coated double D-type low loss optical fiber modulator.

A graphene-coated double D-type low loss all-fiber modulator is proposed. The modulator is improved on the basis of standard fiber. Only the cladding is processed without grinding the original core structure. The upper and lower cladding are cut same distance. This can ensure that the mode field does not deviate in one direction, so that most of the mode field is still tied to the core, which greatly reduces the device loss. The existence of the double graphene layer can also ensure a very excellent modulation efficiency. The calculation results show that the mode loss of our proposed dual-D modulator under X polarization is 0.125 dB/mm, and the mode field mismatch loss is 0.25%. The mode loss in Y polarization is 0.033 dB/mm, and the mode field mismatch loss is 0.32%. When the modulation voltage is 5 V, the modulation depth is 78.4% under the condition of five-layer graphene, while the modulation speed can reach 15.38 GHz. Besides maintaining low modulation voltage and higher modulation efficiency, this structure makes full use of the advantages of good fiber coupling, and will be widely used in future fiber communications and all-fiber systems.

Magnetic field and temperature dual-parameter sensor based on magnetic fluid materials filled photonic crystal fiber.

A dual-parameter sensor based on a photonic crystal fiber (PCF) concatenated with a fiber Bragg grating (FBG) is proposed and experimentally demonstrated for simultaneous measurement of magnetic field and temperature. Novel magnetic fluids (MF) with different concentration and surfactant are filled in the air holes of PCF. The magnetic field measurement property is only determined by PCF, while the temperature is co-determined by PCF and FBG. Experimental results show that the wavelength shift has a good linearity corresponding with temperature and magnetic field. Temperature and magnetic field sensitivity are proportional to concentration of MF and are affected by different surfactants. For PCF point, when polyethylene glycol is used as a surfactant and the magnetic fluid concentration is equal to 0.15, the highest magnetic field sensitivity is up to 924.63 pm/mT. The proposed sensor has a high sensitivity as well as cross-sensitivity resistance, which provides a promising candidate for dual-channel filtering or multi-parameter measurement applications.

Matching optimization for SFS-structured interferometers with step-index fibers.

Axial-aligned SFS-structured interferometers with step-index fibers hold advantages of easy fabrication, high stability, and extremely low cost, while low extinction ratio of the interferometer remains challenging. Here, we investigate the influence of core radius and refractive index of the fibers adopted in the interferometer on its extinction ratio and coupling loss, aiming to achieve the extinction ratio above 15dB - this criterion is applicable for practical use. The improvement of extinction ratio values presented in experiment was from 2dB to 7dB, which match perfectly with theoretical values, therefore demonstrates the effectiveness of the theoretical conclusion.