Genetic Transformation of Plasmid DNA into Escherichia coli Using High Frequency Electromagnetic Energy.

We present a novel technique of genetic transformation of bacterial cells mediated by high frequency electromagnetic energy (HF EME). Plasmid DNA, pGLO (5.4 kb), was successfully transformed into Escherichia coli JM109 cells after exposure to 18 GHz irradiation at a power density between 5.6 and 30 kW m-2 for 180 s at temperatures ranging from 30 to 40 °C. Transformed bacteria were identified by the expression of green fluorescent protein (GFP) using confocal scanning microscopy (CLSM) and flow cytometry (FC). Approximately 90.7% of HF EME treated viable E. coli cells exhibited uptake of the pGLO plasmid. The interaction of plasmid DNA with bacteria leading to transformation was confirmed by using cryogenic transmission electron microscopy (cryo-TEM). HF EME-induced plasmid DNA transformation was shown to be unique, highly efficient, and cost-effective. HF EME-induced genetic transformation is performed under physiologically friendly conditions in contrast to existing techniques that generate higher temperatures, leading to altered cellular integrity. This technique allows safe delivery of genetic material into bacterial cells, thus providing excellent prospects for applications in microbiome therapeutics and synthetic biology.

Silicon-Aluminum Phase-Transformation-Induced Superconducting Rings.

The development of devices that exhibit both superconducting and semiconducting properties is an important endeavor for emerging quantum technologies. We investigate superconducting nanowires fabricated on a silicon-on-insulator (SOI) platform. Aluminum from deposited contact electrodes is found to interdiffuse with Si along the entire length of the nanowire, over micrometer length scales and at temperatures well below the Al-Si eutectic. The phase-transformed material is conformal with the predefined device patterns. The superconducting properties of a transformed mesoscopic ring formed on a SOI platform are investigated. Low-temperature magnetoresistance oscillations, quantized in units of the fluxoid, h/2e, are observed.

Spontaneous Formation of a Ligand-Based 2D Capping Layer on the Surface of Quasi-2D Perovskite Films.

Two-dimensional (2D) Ruddlesden-Popper phase perovskites (RPPs) are attracting growing attention for photovoltaic applications due to their enhanced stability compared to three-dimensional (3D) perovskites. The superior tolerance of 2D RPPs films to moisture and oxygen is mainly attributed to the hydrophobic nature of the introduced long-chain spacer cations (ligands). In this work, it is revealed that a thin capping layer, consisting of self-assembled butylammonium ligands, is spontaneously formed on the top surface of a quasi-2D perovskite film prepared by conventional one-step hot casting. Based on morphological and crystallographic analyses of both the top/bottom surfaces and the interior of quasi-2D perovskite films, the formation process of the 2D capping layer and the assembly of RPPs, comprising both large and small slab thickness (large-n, small-n), is elucidated. The vertical orientation of RPPs that is required for sufficient charge transport for 2D perovskite solar cells (PSCs) is further verified. We propose that the surface capping layer is directly responsible for the long-term stability of 2D PSCs. This work provides detailed insight into the microstructure of quasi-2D RPPs films that should assist the development of strategies for unlocking the full potential of 2D perovskites for high-performance PSCs and other solid-state electronic devices.

Gallium Plasmonic Nanoantennas Unveiling Multiple Kinetics of Hydrogen Sensing, Storage, and Spillover.

Hydrogen is the key element to accomplish a carbon-free based economy. Here, the first evidence of plasmonic gallium (Ga) nanoantennas is provided as nanoreactors supported on sapphire (α-Al2 O3 ) acting as direct plasmon-enhanced photocatalyst for hydrogen sensing, storage, and spillover. The role of plasmon-catalyzed electron transfer between hydrogen and plasmonic Ga nanoparticle in the activation of those processes is highlighted, as opposed to conventional refractive index-change-based sensing. This study reveals that, while temperature selectively operates those various processes, longitudinal (LO-LSPR) and transverse (TO-LSPR) localized surface plasmon resonances of supported Ga nanoparticles open selectivity of localized reaction pathways at specific sites corresponding to the electromagnetic hot-spots. Specifically, the TO-LSPR couples light into the surface dissociative adsorption of hydrogen and formation of hydrides, whereas the LO-LSPR activates heterogeneous reactions at the interface with the support, that is, hydrogen spillover into α-Al2 O3 and reverse-oxygen spillover from α-Al2 O3. This Ga-based plasmon-catalytic platform expands the application of supported plasmon-catalysis to hydrogen technologies, including reversible fast hydrogen sensing in a timescale of a few seconds with a limit of detection as low as 5 ppm and in a broad temperature range from room-temperature up to 600 °C while remaining stable and reusable over an extended period of time.

Catalyst-free synthesis of copper oxide composites as solar radiative filters.

Copper oxide composites were successfully synthesized by a catalyst-free method, plasma arc technology. The as-synthesized composites were characterized by x-ray diffraction, scanning electron microscopy, transmission electron microscopy, Raman spectroscopy, and x-ray photoelectron spectroscopy. The analysis revealed a mixture of crystalline copper oxide (CuO), cuprous oxide (Cu2O) and copper (Cu) phases of the copper oxide composites constitute of irregularly spheroidal particlesµ with nanoparticles aggregate on the surface. Gas pressure during plasma arc process noticeably influences the composition and solar radiative properties of the composite materials. Among the samples studied, the composites synthesized with an arc current of 80 A and a pressure of 300 Torr exhibited the highest near infrared diffuse reflectance, providing a total solar reflectance of 22.96%. The mixed phase composition together with the nanostructures among the composites are considered to contribute to the excellent near infrared reflectance of copper oxide composites. Low reflectance in the visible region combined with high reflectance in the near infrared region make this composite material a good candidate for solar reflective coating which will demonstrate black appearance but keep a cool surface under solar irradiation.

Guided Vortex Motion Control in Superconducting Thin Films by Sawtooth Ion Surface Modification.

Design of flux profile and guided motion of magnetic flux quanta (also known as vortices) are central issues for functionality of superconducting devices. Anchoring vortex movement by trapping flux lines through the use of defects and preventing vortex entry by shielding magnetic field have been broadly explored, which can also enable reduction of noise for optimal device operation. Removing vortices entirely via the so-called ratchet effect (employing an asymmetric energy potential) is another alternative. This ratcheting potential is also used in DNA splitting, particle separation, surface atom electromigration, and electrophoresis. Utilizing a superconductor with the ratchet vortex pinning potential induces a dominant motion direction, which can be used to pump flux out from device functional zones. In this work, a varying thickness superconductor with its tailored intrinsic pinning mechanism has been simulated and proven to provide this preferential vortex motion. We demonstrate both theoretically and experimentally that a varying thickness superconducting ratchet is indeed possible. Furthermore, the sawtooth shape of the bridge provides a tunability to the preferred vortex motion direction, dependent on the ramp gradient and intrinsic pinning strength.

The multi-faceted mechano-bactericidal mechanism of nanostructured surfaces.

The mechano-bactericidal activity of nanostructured surfaces has become the focus of intensive research toward the development of a new generation of antibacterial surfaces, particularly in the current era of emerging antibiotic resistance. This work demonstrates the effects of an incremental increase of nanopillar height on nanostructure-induced bacterial cell death. We propose that the mechanical lysis of bacterial cells can be influenced by the degree of elasticity and clustering of highly ordered silicon nanopillar arrays. Herein, silicon nanopillar arrays with diameter 35 nm, periodicity 90 nm and increasing heights of 220, 360, and 420 nm were fabricated using deep UV immersion lithography. Nanoarrays of 360-nm-height pillars exhibited the highest degree of bactericidal activity toward both Gram stain-negative Pseudomonas aeruginosa and Gram stain-positive Staphylococcus aureus bacteria, inducing 95 ± 5% and 83 ± 12% cell death, respectively. At heights of 360 nm, increased nanopillar elasticity contributes to the onset of pillar deformation in response to bacterial adhesion to the surface. Theoretical analyses of pillar elasticity confirm that deflection, deformation force, and mechanical energies are more significant for the substrata possessing more flexible pillars. Increased storage and release of mechanical energy may explain the enhanced bactericidal action of these nanopillar arrays toward bacterial cells contacting the surface; however, with further increase of nanopillar height (420 nm), the forces (and tensions) can be partially compensated by irreversible interpillar adhesion that reduces their bactericidal effect. These findings can be used to inform the design of next-generation mechano-responsive surfaces with tuneable bactericidal characteristics for antimicrobial surface technologies.

Structure and Chemical Organization in Damselfly Calopteryx haemorrhoidalis Wings: A Spatially Resolved FTIR and XRF Analysis with Synchrotron Radiation.

Insects represent the majority of known animal species and exploit a variety of fascinating nanotechnological concepts. We investigated the wings of the damselfly Calopteryx haemorrhoidalis, whose males have dark pigmented wings and females have slightly pigmented wings. We used scanning electron microscopy (SEM) and nanoscale synchrotron X-ray fluorescence (XRF) microscopy analysis for characterizing the nanostructure and the elemental distribution of the wings, respectively. The spatially resolved distribution of the organic constituents was examined by synchrotron Fourier transform infrared (s-FTIR) microspectroscopy and subsequently analyzed using hierarchical cluster analysis. The chemical distribution across the wing was rather uniform with no evidence of melanin in female wings, but with a high content of melanin in male wings. Our data revealed a fiber-like structure of the hairs and confirmed the presence of voids close to its base connecting the hairs to the damselfly wings. Within these voids, all detected elements were found to be locally depleted. Structure and elemental contents varied between wing membranes, hairs and veins. The elemental distribution across the membrane was rather uniform, with higher Ca, Cu and Zn levels in the male damselfly wing membranes.

High Aspect Ratio Nanostructures Kill Bacteria via Storage and Release of Mechanical Energy.

The threat of a global rise in the number of untreatable infections caused by antibiotic-resistant bacteria calls for the design and fabrication of a new generation of bactericidal materials. Here, we report a concept for the design of antibacterial surfaces, whereby cell death results from the ability of the nanofeatures to deflect when in contact with attaching cells. We show, using three-dimensional transmission electron microscopy, that the exceptionally high aspect ratio (100-3000) of vertically aligned carbon nanotubes (VACNTs) imparts extreme flexibility, which enhances the elastic energy storage in CNTs as they bend in contact with bacteria. Our experimental and theoretical analyses demonstrate that, for high aspect ratio structures, the bending energy stored in the CNTs is a substantial factor for the physical rupturing of both Gram-positive and Gram-negative bacteria. The highest bactericidal rates (99.3% for Pseudomonas aeruginosa and 84.9% for Staphylococcus aureus) were obtained by modifying the length of the VACNTs, allowing us to identify the optimal substratum properties to kill different types of bacteria efficiently. This work highlights that the bactericidal activity of high aspect ratio nanofeatures can outperform both natural bactericidal surfaces and other synthetic nanostructured multifunctional surfaces reported in previous studies. The present systems exhibit the highest bactericidal activity of a CNT-based substratum against a Gram-negative bacterium reported to date, suggesting the possibility of achieving close to 100% bacterial inactivation on VACNT-based substrata.

Microstructure and dynamics of vacancy-induced nanofilamentary switching network in donor doped SrTiO3-x memristors.

Donor doping of perovskite oxides has emerged as an attractive technique to create high performance and low energy non-volatile analog memories. Here, we examine the origins of improved switching performance and stable multi-state resistive switching in Nb-doped oxygen-deficient amorphous SrTiO3 (Nb:a-STO x ) metal-insulator-metal (MIM) devices. We probe the impact of substitutional dopants (i.e., Nb) in modulating the electronic structure and subsequent switching performance. Temperature stability and bias/time dependence of the switching behavior are used to ascertain the role of substitutional dopants and highlight their utility to modulate volatile and non-volatile behavior in a-STO x devices for adaptive and neuromorphic applications. We utilized a combination of transmission electron microscopy, photoluminescence emission properties, interfacial compositional evaluation, and activation energy measurements to investigate the microstructure of the nanofilamentary network responsible for switching. These results provide important insights into understanding mechanisms that govern the performance of donor-doped perovskite oxide-based memristive devices.

Thermally stable coexistence of liquid and solid phases in gallium nanoparticles.

Gallium (Ga), a group III metal, is of fundamental interest due to its polymorphism and unusual phase transition behaviours. New solid phases have been observed when Ga is confined at the nanoscale. Herein, we demonstrate the stable coexistence, from 180 K to 800 K, of the unexpected solid γ-phase core and a liquid shell in substrate-supported Ga nanoparticles. We show that the support plays a fundamental role in determining Ga nanoparticle phases, with the driving forces for the nucleation of the γ-phase being the Laplace pressure in the nanoparticles and the epitaxial relationship of this phase to the substrate. We exploit the change in the amplitude of the evolving surface plasmon resonance of Ga nanoparticle ensembles during synthesis to reveal in real time the solid core formation in the liquid Ga nanoparticle. Finally, we provide a general framework for understanding how nanoscale confinement, interfacial and surface energies, and crystalline relationships to the substrate enable and stabilize the coexistence of unexpected phases.

Demonstrating the capability of the high-performance plasmonic gallium-graphene couple.

Metal nanoparticle (NP)-graphene multifunctional platforms are of great interest for exploring strong light-graphene interactions enhanced by plasmons and for improving performance of numerous applications, such as sensing and catalysis. These platforms can also be used to carry out fundamental studies on charge transfer, and the findings can lead to new strategies for doping graphene. There have been a large number of studies on noble metal Au-graphene and Ag-graphene platforms that have shown their potential for a number of applications. These studies have also highlighted some drawbacks that must be overcome to realize high performance. Here we demonstrate the promise of plasmonic gallium (Ga) nanoparticle (NP)-graphene hybrids as a means of modulating the graphene Fermi level, creating tunable localized surface plasmon resonances and, consequently, creating high-performance surface-enhanced Raman scattering (SERS) platforms. Four prominent peculiarities of Ga, differentiating it from the commonly used noble (gold and silver) metals are (1) the ability to create tunable (from the UV to the visible) plasmonic platforms, (2) its chemical stability leading to long-lifetime plasmonic platforms, (3) its ability to n-type dope graphene, and (4) its weak chemical interaction with graphene, which preserves the integrity of the graphene lattice. As a result of these factors, a Ga NP-enhanced graphene Raman intensity effect has been observed. To further elucidate the roles of the electromagnetic enhancement (or plasmonic) mechanism in relation to electron transfer, we compare graphene-on-Ga NP and Ga NP-on-graphene SERS platforms using the cationic dye rhodamine B, a drug model biomolecule, as the analyte.

Large, controllable spikes of magnetoresistance in La(2/3)Ca(1/3)MnO3/SrTiO3 superlattices.

We have investigated superlattices consisting of up to 30 epitaxial nanomultilayers (3-7 nm thick) of ferromagnetic La(2/3)Ca(1/3)MnO(3) (LCMO) and insulating SrTiO(3) (STO) hybrids. The superlattices demonstrate dramatic shifts of Curie temperature, indicating the possibility of its tunability. The metal-insulator transition (MIT) has been observed around 140 K. Below the MIT temperature, the superlattices have shown sharp drops of resistivity, facilitating the largest and sharpest magnetoresistance peaks (>2000%) ever observed in LCMO films and superlattices at low temperatures. The observed experimental results can be explained in the frame of the phase separation model in manganites with well-organized structures. The results of magnetic and transport measurements of such hybrid structures are discussed, indicating a magnetodielectric effect in STO interlayers. The magnetic and transport properties of the superlattices are shown to be technology-dependent, experiencing dimensional transitions, which enables the creation of structures with prescribed magnetoresistance characteristics for a broad range of applications.

Layer-by-layer assembly of sintered CdSe(x)Te1-x nanocrystal solar cells.

Alloying is a versatile tool for engineering the optical and electronic properties of materials. Here, we explore the use of CdTe and CdSe nanocrystals in developing sintered CdSe(x)Te(1-x) alloys as bandgap tunable, light-absorbing layers for solution-processed solar cells. Using a layer-by-layer approach, we incorporate such alloyed materials into single- and graded-composition device architectures. Nanostructured solar cells employing CdSe(x)Te(1-x) layers are found to exhibit a spectral response deeper into the IR region than bulk CdTe devices as a result of optical bowing and achieve power conversion efficiencies as high as 7.1%. The versatility of the layer-by-layer approach is highlighted through the fabrication of compositionally graded solar cells in which the [Se]:[Te] ratio is varied across the device. Each of the individual layers can be clearly resolved through cross-sectional imaging and show limited interdiffusion. Such devices demonstrate the importance of band-alignment in the development of highly efficient, nanostructured solar cells.

Mechanism for the amorphisation of diamond.

The breakdown of the diamond lattice is explored by ion implantation and molecular dynamics simulations. We show that lattice breakdown is strain-driven, rather than damage-driven, and that the lattice persists until 16% of the atoms have been removed from their lattice sites. The figure shows the transition between amorphous carbon and diamond, with the interfaces highlighted with dashed lines.

Extremely high aspect ratio alumina transmission nanomasks: their fabrication and characterization using electron microscopy.

Free standing, nanoporous alumina templates were fabricated as transmission masks from aluminium using a two-step anodization process followed by acid etching. The resulting membrane comprises self-ordered, periodic arrays of non-connecting circular channels which can be prepared with pore diameters <100 nm and with minimal occlusion. Aspect ratios greater than 300:1 were measured directly using electron transmission and the channels were shown to be highly aligned (angular) over membrane thicknesses of tens of microns. Also evident is some local order associated with both azimuthal and angular domain structure giving rise to local channel tilt which has not previously been reported. Transmission electron microscopy has been shown to be an important characterization tool for these nanomasks as the channels are transparent to electrons, providing a means of directly measuring their thickness and aspect ratio. Expressions for determining their thickness and aspect ratio are also presented and evaluated in this work. These membranes are well suited for use as nanotemplates in transmission lithography applications including ion implantation and ion or electron beam collimation.

Polarisation and wavelength selective transmission through nanohole structures with multiple grating geometry.

Excitation and localization of surface plasmon polariton modes in metal-dielectric structures can be utilized to construct nanophotonic materials and devices with tuneable optical dispersion. We present a selective polariton generator (SPG) device that demonstrates switching of light transmission based on surface plasmon antennae principles. This polarization-sensitive structure selectively generates and transports polaritons of a desired wavelength through subwavelength apertures. Two of these SPGs have been combined around a nanohole into a new, single device that allows polarization and wavelength selective switching of transmission. The multi-state operation is confirmed by experiment results.

Coherent population trapping in diamond N-V centers at zero magnetic field.

Coherent population trapping at zero magnetic field was observed for nitrogen-vacancy centers in diamond under optical excitation. This was measured as a reduction in photoluminescence when the detuning between two excitation lasers matched the 2.88 GHz crystal-field splitting of the color center ground states. This behavior is highly sensitive to strain, which modifies the excited states, and was unexpected following recent experiments demonstrating optical readout of single nitrogen-vacancy electron spins based on cycling transitions. These results demonstrate for the first time that three-level Lambda configurations suitable for proposed quantum information applications can be realized simultaneously for all four orientations of nitrogen-vacancy centers at zero magnetic field.