Nonlinear beam tapering and two-dimensional ring solitons.

We examine a possibility to exploit the nonlinear lens effect-the initial stage of self-focusing to localize initially broad field distribution into the small central area where wave collapse is arrested-the nonlinear beam tapering. We describe two-dimensional localized solitary waves (ring solitons) in a physical system that presents a linear medium in the central core, surrounded by the cladding with the focusing Kerr nonlinearity. The standard variational analysis demonstrates that such solitons correspond to the minimum of the Hamiltonian.

Ultrafast probing of magnetic field growth inside a laser-driven solenoid.

We report on the detection of the time-dependent B-field amplitude and topology in a laser-driven solenoid. The B-field inferred from both proton deflectometry and Faraday rotation ramps up linearly in time reaching 210 ± 35 T at the end of a 0.75-ns laser drive with 1 TW at 351 nm. A lumped-element circuit model agrees well with the linear rise and suggests that the blow-off plasma screens the field between the plates leading to an increased plate capacitance that converts the laser-generated hot-electron current into a voltage source that drives current through the solenoid. ALE3D modeling shows that target disassembly and current diffusion may limit the B-field increase for longer laser drive. Scaling of these experimental results to a National Ignition Facility (NIF) hohlraum target size (∼0.2cm^{3}) indicates that it is possible to achieve several tens of Tesla.

Metal powder absorptivity: modeling and experiment.

We present results of numerical modeling and direct calorimetric measurements of the powder absorptivity for a number of metals. The modeling results generally correlate well with experiment. We show that the powder absorptivity is determined, to a great extent, by the absorptivity of a flat surface at normal incidence. Our results allow the prediction of the powder absorptivity from normal flat-surface absorptivity measurements.

Impact of laser-contaminant interaction on the performance of the protective capping layer of 1 ω high-reflection mirror coatings.

High dielectric constant multilayer coatings are commonly used on high-reflection mirrors for high-peak-power laser systems because of their high laser-damage resistance. However, surface contaminants often lead to damage upon laser exposure, thus limiting the mirror's lifetime and performance. One plausible approach to improve the overall mirror resistance against laser damage, including that induced by laser-contaminant coupling, is to coat the multilayers with a thin protective capping (absentee) layer on top of the multilayer coatings. An understanding of the underlying mechanism by which laser-particle interaction leads to capping layer damage is important for the rational design and selection of capping materials of high-reflection multilayer coatings. In this paper, we examine the responses of two candidate capping layer materials, made of SiO2 and Al2O3, over silica-hafnia multilayer coatings. These are exposed to a single oblique shot of a 1053 nm laser beam (fluence ∼10 J/cm2, pulse length 14 ns), in the presence of Ti particles on the surface. We find that the two capping layers show markedly different responses to the laser-particle interaction. The Al2O3 cap layer exhibits severe damage, with the capping layer becoming completely delaminated at the particle locations. The SiO2 capping layer, on the other hand, is only mildly modified by a shallow depression. Combining the observations with optical modeling and thermal/mechanical calculations, we argue that a high-temperature thermal field from plasma generated by the laser-particle interaction above a critical fluence is responsible for the surface modification of each capping layer. The great difference in damage behavior is mainly attributed to the large disparity in the thermal expansion coefficient of the two capping materials, with that of Al2O3 layer being about 15 times greater than that of SiO2.

Calculation of laser absorption by metal powders in additive manufacturing.

We have calculated the absorption of laser light by a powder of metal spheres, typical of the powder employed in laser powder-bed fusion additive manufacturing. Using ray-trace simulations, we show that the absorption is significantly larger than its value for normal incidence on a flat surface, due to multiple scattering. We investigate the dependence of absorption on powder content (material, size distribution, and geometry) and on beam size.

Nonlinear pulse combining and pulse compression in multi-core fibers.

We demonstrate light pulse combining and pulse compression using a continuous-discrete nonlinear system implemented in a multi-core fiber (MCF). It is shown that the pulses initially injected into all of the cores of a ring MCF are combined by nonlinearity into a small number of cores with simultaneous pulse compression. We demonstrate the combining of 77% of the energy into one core with pulse compression over 14× in a 20-core MCF. We also demonstrate that a suggested scheme is insensitive to the phase perturbations. Nonlinear spatio-temporal pulse manipulation in multi-core fibers can be exploited for various applications, including pulse compression, switching, and combining.

Power-controlled phase-matching and instability of CW propagation in multicore optical fibers with a central core.

We present modulation instability analysis including azimuthal perturbations of steady-state continuous wave (CW) propagation in multicore-fiber configurations with a central core. In systems with a central core, a steady CW evolution regime requires power-controlled phase matching, which offers interesting spatial-division applications. Our results have general applicability and are relevant to a range of physical and engineering systems, including high-power fiber lasers, optical transmission in multicore fiber, and systems of coupled nonlinear waveguides.

Laser beam self-focusing in the atmosphere.

We propose to exploit a self-focusing effect in the atmosphere to assist delivering powerful laser beams from orbit to the ground. We demonstrate through numerical modeling that when the self-focusing length is comparable with the atmosphere height the spot size on the ground can be reduced well below the diffraction limits without beam quality degradation. The density variation suppresses beam filamentation and provides the self-focusing of the beam as a whole. The use of light self-focusing in the atmosphere can greatly relax the requirements for the orbital optics and ground receivers.

Radiation produced by femtosecond laser-plasma interaction during dielectric breakdown.

Optical breakdown by femtosecond and nanosecond laser pulses in transparent dielectrics produces an ionized region of dense plasma confined within the bulk of the material. This ionized region is responsible for broadband radiation that accompanies the breakdown process. Spectroscopic measurements of the accompanying light have been used to show that, depending on the laser parameters, the spectra may originate from plasma-induced second-harmonic generation, supercontinuum generation, or thermal emission by the plasma. By monitoring the emission from the ionized region, one can ascertain the predominant breakdown mechanism and the morphology of the damage region.

Localized dynamics during laser-induced damage in optical materials.

Laser-induced damage in wide band-gap optical materials is the result of material modifications arising from extreme conditions occurring during this process. The material absorbs energy from the laser pulse and produces an ionized region that gives rise to broadband emission. By performing a time-resolved investigation of this emission, we demonstrate both that it is blackbody in nature and that it provides the first direct measurement of the localized temperature of the material during and following laser damage initiation for various optical materials. For excitation using nanosecond laser pulses, the plasma, when confined in the bulk, is in thermal equilibrium with the lattice. These results allow for a detailed characterization of temperature, pressure, and electron densities occurring during laser-induced damage.

Effects of nonionizing prepulses in high-intensity laser-solid interactions.

We present theoretical and experimental evidence that nonionizing prepulses with intensities as low as 10(8)-10(9) W/cm(2) can substantially alter high intensity laser-solid interactions. We show that prepulse-heating and vaporization of the target can lead to a preformed plasma once the vapor is ionized by the rising edge of the high-intensity pulse. Our results indicate that peak prepulse intensity is not the only important parameter to consider in determining preformed plasma thresholds, and that a more comprehensive analysis of the prepulse duration and the target material is required.

Investigation of ultrafast laser-driven radiative blast waves.

We have examined the evolution of cylindrically symmetric blast waves produced by the deposition of femtosecond laser pulses in gas jets. In high- Z gases radiative effects become important. We observe the production of an ionization precursor ahead of the shock front and deceleration parameters below the adiabatic value of 1/2 (for a cylinder), an effect expected when the blast wave loses energy by radiative cooling. Despite significant radiative cooling, the blast waves do not appear to develop thin shell instabilities expected for strongly radiative waves. This is believed to be due to the stabilizing effect of a relatively thick blast wave shell resulting in part from electron thermal conduction effects.

Influence of pulse duration on ultrashort laser pulse ablation of biological tissues.

Ablation characteristics of ultrashort laser pulses were investigated for pulse durations in the range of 130 fs-10 ps. Tissue samples used in the study were dental hard tissue (dentin) and water. We observed differences in ablation crater morphology for craters generated with pulse durations in the 130 fs-1 ps and the 5 ps-10 ps range. For the water experiment, the surface ablation and subsequent propagation of stress waves were monitored using Mach-Zehnder interferometry. For 130 fs-1 ps, energy is deposited on the surface while for longer pulses the beam penetrates into the sample. Both studies indicate that a transition occurs between 1 and 5 ps.

Collagen structure and nonlinear susceptibility: effects of heat, glycation, and enzymatic cleavage on second harmonic signal intensity.

BACKGROUND AND OBJECTIVE: Helical macromolecules such as collagen and DNA are characterized by nonlinear optical properties, including nonlinear susceptibility. Because collagen is the predominant component of most biological tissues, as well as the major source of second harmonic generation (SHG), it is reasonable to assume that changes in harmonic signal can be attributed to structural changes in collagen. The purpose of this study is to determine whether various modifications of collagen structure affect second harmonic intensity. STUDY DESIGN/MATERIALS AND METHODS: SHG was measured in tissues from cows, humans, and chickens. The effects of beam polarization, thermal denaturation, glyco-oxidative damage, and enzymatic cleavage of tissues on second harmonic intensity was studied. RESULTS: The second harmonic intensity differed considerably among different tissues, as did the effect of the incident beam polarization. In structurally modified collagen, SHG was significantly degraded from SHG in intact collagen. CONCLUSION: These structural modifications are representative of changes that occur in pathophysiologic conditions such as thermal injury, diabetes, tumor invasion, and abnormal wound healing. The ability to assess these changes rapidly and noninvasively has considerable clinical applicability. SHG analysis might provide a unique tool for monitoring these structural changes of collagen.

Rear-Surface Laser Damage on 355-nm Silica Optics Owing to Fresnel Diffraction on Front-Surface Contamination Particles.

Light intensity modulations caused by opaque obstacles (e.g., dust) on silica lenses in high-power lasers often enhance the potential for laser-induced damage. To study this effect, particles (10-250 mum) with various shapes were sputter deposited on the input surface and irradiated with a 3-ns laser beam at 355 nm. Although a clean silica surface damages at fluences above 15 J/cm(2), a surface contaminated with particles can damage below 11.5 J/cm(2). A pattern that conforms to the shape of the input surface particle is printed on the output surface. Repetitive illumination resulted in catastrophic drilling of the optic. The damage pattern correlated with an interference image of the particle before irradiation. The image shows that the incident beam undergoes phase (and amplitude) modulations after it passes around the particle. We modeled the experiments by calculating the light intensity distribution behind an obscuration by use of Fresnel diffraction theory. The comparison between calculated light intensity distribution and the output surface damage pattern showed good agreement. The model was then used to predict the increased damage vulnerability that results from intensity modulations as a function of particle size, shape, and lens thickness. The predictions provide the basis for optics cleanliness specifications on the National Ignition Facility to reduce the likelihood of optical damage.

Ablation of human nail by pulsed lasers.

BACKGROUND AND OBJECTIVE: The hard and resistant structure of the nail plate forms a natural barrier that limits the penetration of topical drugs. To overcome this barrier, the use of pulsed laser systems has been suggested. The purpose of this study was to evaluate the effect of four laser systems on nail plate ablation rates, ablation efficiencies, and subsequent craters morphology. STUDY DESIGN/MATERIAL AND METHODS: Solid state Er:YAG (2.94 microns, 250 microseconds), a Ho:YSGG (2.08 microns, 250 microseconds), a XeC1 Excimer (308 nm, 15 ns), and a novel solid-state ultrashort pulse laser (1.05 microns, 350 fs) were used. Ablation rates, surface morphology, and extent of collateral damage were evaluated using light and electron microscopy. RESULTS: Best ablation efficiencies were demonstrated with the ultrashort pulsed laser (1 micron/mJ), whereas maximum material removal per pulse was obtained with the Er:YAG laser (80 microns/ pulse). Scanning electron microscopy showed cracking damage with both Ho:YSGG and Er:YAG. XeC1 and the ultrashort pulse system left tissue surfaces free of cracks or thermal damage. CONCLUSION: With its minimal acoustical and mechanical impact, high efficiency, and negligible collateral damage, the ultrashort pulse laser at 3 J/cm2 was found to be the optimal laser system for nail ablation.

Multidimensional solitons in fiber arrays.

We demonstrate that nonlinear optical fiber arrays can support stable solitonlike pulses with finite energy. The bound state that we have found is localized both in time and in spatial domain in the direction perpendicular to the pulse propagation. Numerical studies support our analytical conclusions.

Modulational instability of continuous waves and one-dimensional temporal solitons in fiber arrays.

We present a linear stability analysis of two-dimensional continuous waves and one-dimensional temporal solitons in nonlinear-optical fiber arrays. Guided by this analysis, we use numerical integrations of the governing equations to show that these arrays are all-optical switching devices. Light injected into the N-fiber array is temporally compressed and spatially localized into a few fibers on output.