Phosphorescence Tuning through Heavy Atom Placement in Unsymmetrical Difluoroboron ß-Diketonate Materials.

Difluoroboron ß-diketonates (BF2 bdks) show both fluorescence (F) and room-temperature phosphorescence (RTP) when confined to a rigid matrix, such as poly(lactic acid). These materials have been utilized as optical oxygen sensors (e.g., in tumors, wounds, and cells). Spectral features include charge transfer (CT) from the major aromatic donor to the dioxaborine acceptor. A series of naphthyl-phenyl dyes (BF2 nbm) (1-6) were prepared to test heavy-atom placement effects. The BF2 nbm dye (1) was substituted with Br on naphthyl (2), phenyl (3), or both rings (4) to tailor the fluorescence/phosphorescence ratio and RTP lifetime-important features for designing O2 sensing dyes by means of the heavy atom effect. Computational studies identify the naphthyl ring as the major donor. Thus, Br substitution on the naphthyl ring produced greater effects on the optical properties, such as increased RTP intensity and decreased RTP lifetime compared to phenyl substitution. However, for electron-donating piperidyl-phenyl dyes (5), the phenyl aromatic is the major donor. As a result, Br substitution on the naphthyl ring (6) did not alter the optical properties significantly. Experimental data and computational modeling show the importance of Br position. The S1 and T1 states are described by two singly occupied MOs (SOMOs). When both of these SOMOs have substantial amplitude on the heavy atom, passage from S1 to T1 and emission from T1 to S0 are both favored. This shortens the excited-state lifetimes and enhances phosphorescence.

Scalable focused ion beam creation of nearly lifetime-limited single quantum emitters in diamond nanostructures.

The controlled creation of defect centre-nanocavity systems is one of the outstanding challenges for efficiently interfacing spin quantum memories with photons for photon-based entanglement operations in a quantum network. Here we demonstrate direct, maskless creation of atom-like single silicon vacancy (SiV) centres in diamond nanostructures via focused ion beam implantation with ∼32 nm lateral precision and <50 nm positioning accuracy relative to a nanocavity. We determine the Si+ ion to SiV centre conversion yield to be ∼2.5% and observe a 10-fold conversion yield increase by additional electron irradiation. Low-temperature spectroscopy reveals inhomogeneously broadened ensemble emission linewidths of ∼51 GHz and close to lifetime-limited single-emitter transition linewidths down to 126±13 MHz corresponding to ∼1.4 times the natural linewidth. This method for the targeted generation of nearly transform-limited quantum emitters should facilitate the development of scalable solid-state quantum information processors.

Tailoring Oxygen Sensitivity with Halide Substitution in Difluoroboron Dibenzoylmethane Polylactide Materials.

The dual-emissive properties of solid-state difluoroboron ß-diketonate-poly(lactic acid) (BF2bdkPLA) materials have been utilized for biological oxygen sensing. In this work, BF2dbm(X)PLA materials were synthesized, where X = H, F, Cl, Br, and I. The effects of changing the halide substituent and PLA polymer chain length on the optical properties in dilute CH2Cl2 solutions and solid-state polymer films were studied. These luminescent materials show fluorescence, phosphorescence, and lifetime tunability on the basis of molecular weight, as well as lifetime modulation via the halide substituent. Short BF2dbm(Br)PLA (6.0 kDa) and both short and long BF2dbm(I)PLA polymers (6.0 or 20.3 kDa) have fluorescence and intense phosphorescence ideal for ratiometric oxygen sensing. The lighter halide-dye polymers with hydrogen, fluorine, and chlorine substitution have longer phosphorescence lifetimes and can be utilized as ultrasensitive oxygen sensors. Photostability was also analyzed for the polymer films.

Aggregation-Induced Emission from Fluorophore-Quencher Dyads with Long-Lived Luminescence.

Aggregation-induced emission (AIE) is an important photophysical phenomenon in molecular materials and has found broad applications in optoelectronics, bioimaging, and chemosensing. Currently, the majority of reported AIE-active molecules are based on either propeller-shaped rotamers or donor-acceptor molecules with strong intramolecular charge-transfer states. Here, we report a new design motif, where a fluorophore is covalently tethered to a quencher, to expand the scope of AIE-active materials. The fluorophore-quencher dyad (FQD) is nonemissive in solutions due to photoinduced electron-transfer quenching but becomes luminescent in the solid state. The intrinsic emission lifetimes are found to be within the microseconds domain at both room and low temperatures. We performed single-crystal X-ray diffraction measurement for each of the FQDs as well as theoretical calculations to account for the possible origin of the long-lived AIE. These FQDs represent a new class of AIE-active molecules with potential applications in organic optoelectronics.

Aromatic difluoroboron ß-diketonate complexes: effects of π-conjugation and media on optical properties.

Aromatic difluoroboron ß-diketonate complexes (BF2bdks) are classic fluorescent molecules that have been explored as photochemical reagents, two-photon dyes, and oxygen sensors. To gain a better understanding of their emissive properties in both solution and polymer matrices, BF2bdks with varying aromatic groups were synthesized and their photophysical properties were investigated in both methylene chloride and poly(lactic acid) (PLA). Absorption spectra showed systematic variations that are well correlated with structural features, including the size of the aryl substituent and the presence of a para electron-donating methoxy substituent. Computational modeling of the absorption spectra with the TD-B3LYP/6-311+G(d)//B3LYP/6-31G(d) formulation of density functional theory and a polarizable continuum model of dichloromethane solvent shows that all systems show intense π-π* one-electron excitations, usually from one of the highest occupied molecular orbitals (HOMO - k, k = 0, 1, 2) to the lowest unoccupied molecular orbital (LUMO). Emission properties are sensitive to the dye structure and medium. Based on spectroscopic and lifetime studies, BF2bdks exhibit comparable fluorescence properties in both solutions and polymers when the diketonate group is functionalized with smaller aromatic ring systems such as benzene. For BF2bdks with larger arene ring systems, such as anthracene, emission from a strong intramolecular charge-transfer (ICT) state was also noted in both solution and in PLA. There are differences in relative intensities of peaks arising from π-π* and ICT excitations depending upon dye loading in PLA. Substituent effects were also observed. Electron-donating methoxyl groups on the aromatic rings lead to enhanced fluorescence quantum yields. For certain dyes, phosphorescence is detected at low temperature or under a nitrogen atmosphere in PLA matrices.

Integrity characterization of myoglobin released from poly(ε-caprolactone) microspheres using two analytical methods: UV/Vis spectrometry and conductometric bi-enzymatic biosensor.

Myoglobin (Mb)-loaded poly(ε-caprolactone) (PCL) microparticles were prepared by multiple emulsion with solvent extraction/evaporation method under more or less deleterious operating conditions. The protein integrity was monitored using both UV/Vis absorbance ratio method at specific wavelengths and a conductometric bi-enzymatic biosensor based on proteinase K and pronase. Under standard operating conditions, Mb remained in native conformation, while different degrees of protein denaturation were observed by changing the encapsulation conditions. It was shown that solvent elimination under reduced pressure and in a lower extent addition of a higher molecular weight PCL led to protein alteration. In the first case, the loss of protein integrity can be attributed to residual solvent entrapped in particles whose solidification was accelerated. In the second case, denaturation may be explained by an increase in the protein exposure time at water/organic solvent interface due to an increase in organic phase viscosity.

An easy method to monitor lactide polymerization with a boron fluorescent probe.

Fluorescence spectroscopy has been widely used to monitor different polymer processes such as polymerization kinetics, chain entanglements, and thermal transitions. The solvent-free controlled ring-opening polymerization (ROP) of lactide is significant both commercially and for research; thus, monitoring this process with a simple fluorescence method can be very useful. Here, a fluorescent dye, difluoroboron 4-methoxydibenzoylmethane (BF(2)dbmOMe) is employed to probe lactide bulk ROP by measuring the emission from solidified reaction aliquots at room temperature. It was found that, through the course of polymerization, the fluorescence of BF(2)dbmOMe in the solid-state aliquots exhibited a systematic shift from yellow to green and then to blue, accompanied by a gradual reduction in the decay lifetime. The fluorescence color change is sensitive to the monomer percent conversion, not the polymer molecular weight. On the basis of these observations and experimental data, we propose that the long-wavelength emission with perceivably longer lifetimes arises from BF(2)dbmOMe dye aggregates (ground and/or excited states), while the dissolved individual dye molecules are responsible for the blue fluorescence with a shorter lifetime. This demonstration of the utility of BF(2)dbmOMe as a fluorescent probe for lactide polymerization could have important practical implications.

Determination of poly(epsilon-caprolactone) solubility parameters: application to solvent substitution in a microencapsulation process.

The evolution of regulation on chemical substances (i.e. REACH regulation) calls for the progressive substitution of toxic chemicals in formulations when suitable alternatives have been identified. In this context, the method of Hansen solubility parameters was applied to identify an alternative solvent less toxic than methylene chloride used in a microencapsulation process. During the process based on a multiple emulsion (W/O/W) with solvent evaporation/extraction method, the solvent has to dissolve a polymer, poly(epsilon-caprolactone) (PCL), which forms a polymeric matrix encapsulating or entrapping a therapeutic protein as the solvent is extracted. Therefore the three partial solubility parameters of PCL have been determined by a group contribution method, swelling experiments and turbidimetric titration. The results obtained allowed us to find a solvent, anisole, able to solubilize PCL and to form a multiple emulsion with aqueous solutions. A feasibility test was conducted under standard operating conditions and allowed the production of PCL microspheres.

Luminescent donor-acceptor beta-diketones: modulation of emission by solvent polarity and group II metal binding.

A class of aryl trifluoromethyl-containing beta-diketones were synthesized via one step Claisen condensation. These pi-conjugated diketones exhibit strong solvatochromism from intramolecular donor-acceptor charge transfer (CT). In addition, fluorescence quantum yields (phi(f)) and lifetimes (tau(f)) were measured in different solvents. Diketones exhibit bathochromic shifts in emission spectra with increasing solvent polarity. Fluorescence changes upon Group II metal binding were also studied. Despite the relatively simple structure, the anthracene-CF(3) diketone, atm, has strong binding affinity for Mg2+. A 70 nm blue shift and sixfold increase in intensity were observed upon addition of only one equivalent MgCl2 in ethanol solution. It also shows selectivity for Mg2+ binding even in the presence of excess Ca2+. Association constant (Ka) calculations suggest atm has two orders of magnitude stronger chelation for divalent magnesium than for calcium. These findings make atm an attractive starting point for molecular probe and light emitting material design.