Optical polymers with tunable refractive index for nanoimprint technologies.

In order to realize a versatile high throughput production of micro-optical elements, UV-curable polymer composites containing titanium dioxide nanoparticles were prepared and characterized. The composites are based on an industrial prototype epoxy polymer. Titanium dioxide nanoparticles smaller than 10 nm were synthesized by the nonaqueous sol method and in situ sterically stabilized by three different organic surfactants. The composites exhibit high transparency. Distinct alteration of optical transmission properties for visible light and near IR wavelength range could be avoided by adaption of the stabilizing organic surfactant. Most importantly, the refractive index (RI) of the composites that depends on the fraction of incorporated inorganic nanoparticles could be directly tuned. E.g. the RI at a wavelength of 635 nm of a composite containing 23 wt% titanium dioxide nanoparticles is increased to 1.626, with respect to a value of 1.542 for the pure polymer. Furthermore, it could be demonstrated that the prepared inorganic-organic nanocomposites are well suited for the direct fabrication of low-cost micro-optical elements by nanoimprint lithography. A low response of the optical composite properties to temperature treatment up to 220 °C with a shrinkage of only about 4% ensures its application for integrated micro-optical elements in industrial production.

Evaluation of resistless Ga⁺ beam lithography for UV NIL stamp fabrication.

This paper presents an alternative rapid prototyping approach for the fabrication of stamps for UV nanoimprint lithography. In this process, areas implanted with gallium serve as an etch mask for the dry etching of quartz. The implantation is performed using a focused ion beam system. To avoid charging of the quartz substrate the use of thin layers of chromium or carbon on the quartz substrate has been evaluated. The resulting quartz structures exhibit very smooth surfaces after dry etching, if the implantation dose is high enough to form a stable etch mask. Furthermore, anisotropic etching could be realized by optimization of a quartz etching process involving C4F8 and O2 after the use of resistless Ga(+) beam lithography. Finally, imprints into a UV curing resist are performed successfully with the manufactured stamps, proving that the presence of Ga rich areas on the stamp is not detrimental to the curing of the resist or the functionality of the anti-sticking layer.