Self-Formation of Lignin Particles Through Melt-Extrusion for Active Biodegradable Food Packaging.

This study presents a method for the self-formation of lignin particles within a polylactic acid (PLA) matrix during melt-extrusion, eliminating the need for separation and drying steps typically associated with submicro-size lignin particles. This method effectively mitigates the problem of agglomeration often associated with the drying step. Softwood kraft lignin, guaiacyl lignin (GL-lignin), was dissolved in low-molecular-weight poly(ethylene glycol) (PEG) and was introduced into a twin-screw extruder using a liquid feeder. Lignin particles within a particle size range of 200-500 nm were observed in the extrudate of the PLA/PEG/GL-lignin composites. PLA/PEG/GL-lignin composite films were produced through blown film extrusion. These composite films demonstrated superior ultraviolet (UV)-barrier and antioxidant properties compared to neat PLA films, with optical and mechanical characteristics comparable to those of neat PLA. Moreover, migration values of the composite films in various food simulants were below regulatory limits, suggesting their potential for food packaging applications. This self-formation process offers a promising approach for utilizing lignin for PLA applications.

Improvement in Crystallization, Thermal, and Mechanical Properties of Flexible Poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide) Bioplastic with Zinc Phenylphosphate.

Poly(L-lactide)-b-poly(ethylene glycol)-b-poly(L-lactide) (PLLA-PEG-PLLA) shows promise for use in bioplastic applications due to its greater flexibility over PLLA. However, further research is needed to improve PLLA-PEG-PLLA's properties with appropriate fillers. This study employed zinc phenylphosphate (PPZn) as a multi-functional filler for PLLA-PEG-PLLA. The effects of PPZn addition on PLLA-PEG-PLLA characteristics, such as crystallization and thermal and mechanical properties, were investigated. There was good phase compatibility between the PPZn and PLLA-PEG-PLLA. The addition of PPZn improved PLLA-PEG-PLLA's crystallization properties, as evidenced by the disappearance of the cold crystallization temperature, an increase in the crystallinity, an increase in the crystallization temperature, and a decrease in the crystallization half-time. The PLLA-PEG-PLLA's thermal stability and heat resistance were enhanced by the addition of PPZn. The PPZn addition also enhanced the mechanical properties of the PLLA-PEG-PLLA, as demonstrated by the rise in ultimate tensile stress and Young's modulus. We can conclude that the PPZn has potential for use as a multi-functional filler for the PLLA-PEG-PLLA composite due to its nucleating-enhancing, thermal-stabilizing, and reinforcing ability.

Microfabrication of Thermoplastic Polypropylene Surface Structures via Thermal Imprinting for Controlling the Adhesion of Easy Peel Package.

Micropatterns were fabricated on polypropylene (PP) surfaces using the hot embossing technique with various temperatures ranging from 160 to 175 °C and applying force conditions from 100 to 300 N. To evaluate the replication quality, an effective filling ratio of 1 indicates that the volume of the formed pattern is similar to the mold cavity volume. From the results, the filling ratio increased with increasing the embossing temperature. For instance, under a constant force of 100 N, the filling ratio of polypropylene (PP) with small square arrays (pattern SS) increased from 0.08 to 0.41 when the embossing temperature was raised from 160 to 175 °C, respectively. With the increase of applied force, the filling ratio also increased. At an imprinting temperature of 175 °C and an applied force of 300 N, the highest effective filling ratio that was achieved was approximately 0.99. Furthermore, the effect of PP with different melt flow indexes (MFIs) on the filling ratio was investigated. For food packaging applications, a micropatterned PP sheet was heat-sealed with a biaxially oriented polypropylene (BOPP) film. The micropatterned PP sheet demonstrated easy-opening properties by varying sealing contact areas and micropattern geometries between the sheet and the BOPP film. All micropatterned PP sheets with an MFI of 25 g/10 min exhibited an easy peel property with adhesive failure characteristics at a heat-sealing temperature of 150 °C and a dwell time of 3 s. There was no residue on the PP substrate surface. The overall findings are beneficial in understanding the hot embossing technology for fabricating micropatterns on polymer surfaces, and it can be applied in an easy peel property for packaging applications.