Two-dimensional transmissive structural colors for high-security information encryption.

Structural colors produced from nanostructures have attracted much attention due to their promising advantages of long-term stability and high resolution. Many nanostructures like metasurfaces have been demonstrated to generate color information in the transmission or reflection mode. Here, a strategy of combining polarization-insensitive and polarization-sensitive transmissive structural color is proposed to realize convenient and diverse encrypted pattern designs. A two-dimensional metasurface, whose polarization characteristics are determined by the size of a nanobrick unit, is embedded inside an optical cavity to produce transmissive structural color. The polarization-insensitive transmissive structural color exhibits a wide color gamut and high excitation purity in all polarization states, while the polarization-sensitive transmissive structural color maintains the similar color appearance in x-direction polarization but appears nearly black in y-direction polarization. Combining these two transmissive structural colors can achieve diverse images designed at different polarizations instead of simply hiding the image in a specific polarization state. An image of "flower and flowerpot" using the generated colors is visually illustrated, which shows that the proposed transmissive structural colors would have great potential in the areas of security information encryption.

All-polymer monolithic resonant integrated optical gyroscope.

Resonant integrated optical gyroscopes (RIOGs) can integrate discrete optical components as a promising candidate for high-performance micro-optical gyroscopes. However, the current RIOG still consists of discrete elements due to the difficulty and complexity of heterogeneous integration of resonator and modulators. This paper presents on-chip integration of optical functional components including modulator, resonator, beam splitter, and coupler for the organic-polymer-based RIOG. Simple integrated optical processes such as spin coating, lithography, and etching can realize RIOG chips with low cost, size, weight, and power (CSWaP) features. Thereinto, the electro-optic modulator (EOM) fabricated by self-synthesized electro-optic (EO) polymer (side chain bonded polyurethane imide) exhibits less than 2 V half-wave voltage, which is half of the lithium niobate (LiNbO3) modulator. With respect to the resonator, a quality factor of approximately million was achieved using low-loss fluorinated polymer. In addition, the angular velocity sensing of RIOG was also investigated. By demonstrating the monolithic integration of the resonator and modulators, such an all-polymer RIOG chip prototype builds the technical foundation for the precision fully integrated optical gyroscope.

Laser-Induced Forward Transferred Optical Scattering Nanosilica for Transparent Displays.

Laser printing has become a promising alternative for large-scale fabrication of functional devices. Here, laser-induced forward transfer (LIFT) of nanosilica was successfully achieved using a lower-cost nanosecond laser with a center wavelength of 1064 nm. To enhance the light absorption of silica, a small amount of graphene oxide (GO) was added to the fumed silica. Investigations were conducted to give an insight into the role of GO in the LIFT process. Pattern deposition was achieved with a minimum line width of 221 µm. The scattering can be tuned from ~2.5% to ~17.5% by changing the laser fluence. The patternable transparent display based on laser transferred nanosilica (LTNS) film was also demonstrated, showing its capability to deliver information on multiple levels. This LIFT based technique promotes fast, flexible, and low-cost manufacturing of scattering-based translucent screens or patterns for transparent displays.

Thermal imprint of wide-angle viewing bi-stable cholesteric liquid crystal displays.

A thermal-imprint addressable and electrically erasable bi-stable cholesteric liquid crystal (CLC) display with a wide viewing angle is demonstrated. The proposed device with a multi-domain planar state is realized by filling a negative CLC in a vertical-alignment cell. The thermal-imprint method is introduced to restore the CLC from a reflective state (multi-domain planar state) to a translucent state (focal-conic state) to display images, and an electric field is used to erase the device back to totally reflective mode. This CLC display is bi-stable and does not require a complex driving circuit. Together with the features of a large viewing angle and less color shift, this device shows great potential for update-on-demand applications.

Advance of Netrin-1 for Protection and Repairment of Injuries after Cerebral Infarction (review) / 中国康复理论与实践

Netrin-1 may protect and repair the damage caused by cerebral infarction, in terms of inhibiting apoptosis and inflammatory, and promoting angiogenesis and axon regeneration, etc. Netrin-1 may associate with the pathogenesis and outcome of cerebral infarction. The application of Netrin-1 in clinic needs more researches.

Biomechanical Study of Posterior Dynamic Fixation at Atlantoaxial Joints / 医用生物力学

Objective To evaluate the influence of dynamic fixation (rotating and sliding pedicle screws) on stability of the atlantoaxial joint. Methods A series of in vitro biomechanical tests were performed using six fresh adult cervical spines (occipital bone-C4 segment) to simulate different conditions in surgery， including the intact state, the injury state, rigid fixation, rotating pedicle screw fixation, sliding pedicle screw fixation. The repeated measurement design was employed, and under intact, injury and different fixation states, the pure moment of 1.5 N·m in flexion-extension, left-right lateral bending, left-right axial rotation directions were applied using the spinal testing machine. The movement of atlantoaxial spine was measured consecutively by three-dimensional （3D） measurement system in order to analyze the range of motion (ROM) and neutral zone (NZ) of atlantoaxial joints. Results Under injury state, ROM of atlantoaxial joints was significantly larger than that under intact state during flexion, extension, lateral bending and rotation, leading to the instability of atlantoaxial joints. ROM of fixation segments was significantly reduced during flexion, extension, lateral bending and rotation after rigid and dynamic fixation. Compared with rigid fixation, dynamic fixation showed a significant ROM increase during lateral bending. NZs of fixation segments after dynamic fixation were significantly reduced. There were no significant ROM differences between rigid fixation and dynamic fixation. Conclusions The stability of atlantoaxial joints by dynamic fixation during flexion, extension and rotation was comparable to that by rigid fixation, but weaker during lateral bending. Dynamic screw fixation can maintain the relative stability of atlantoaxial joints.

Femtosecond laser-induced non-thermal welding for a single Cu nanowire glucose sensor.

Copper nanowires (CuNWs) are a key building block to facilitate carrier conduction across a broad range of nanodevices. For integration into nanoscale devices, manipulation and welding of these nanowires need to be overcome. Based on high energy density laser processing investigation, we report on innovative welding of single CuNWs to a silver film using a tightly focused laser beam combined with manipulation of CuNWs through the dielectrophoresis (DEP) method. Two types of lasers, femtosecond (FS) and continuous-wave (CW), were employed to analyze, improve, and control Cu-NW melting characteristics under high energy density irradiation. The FS laser welding of CuNWs resulted in a metallic joint with a low contact resistance suitable for functional electronic nanodevices. Computational simulations using the 1-D heat diffusion equation and finite difference method (FDM) were performed to gain an insight into metal-laser interactions for high performance welded contact development. Simulation studies on lasers established contrasting melting behavior of metal under laser irradiation. The device feasibility of CuNW based welded contacts was evaluated in terms of the electrical performance of a glucose sensor. It was possible to sense glucose concentration down to 10-6 M, demonstrating a path towards integration of CuNWs into wearable, flexible nanoelectronic devices.

Integrated optical readout using a hybrid plasmonic directional coupler in water.

The integrated polymer optical readout has been recognized as a promising route to obtain miniaturized cantilever-based sensor works on static mode for various liquid-state chemical and biological measurements in portable lab-on-chip systems. For conventional optical readouts based on end-fire coupling mechanisms, the most sensitive region was limited to a cantilever deflection of several micrometers due to the Gaussian profile of the mode in polymer waveguides. We proposed an integrated optical readout based on a hybrid plasmon directional coupler aiming at improving the sensitivity at the sub-micrometer deflection region (<1 µm). The coupler consists of a short-range surface plasmon waveguide and a polymer waveguide. We show that the coupling length and the propagation loss of the coupler are ultra-sensitive to the deflection, which leads to improved sensitivity of the readout. In addition, the dynamic range can be extended by integrating an array of hybrid plasmon directional couplers onto a single microcantilever. The proposed optical readout is beneficial to high sensitivity cantilever-based sensors for lab-on-chip applications and enables the design of more compact optical waveguide-based sensors in water.

Effects on facet joint force and stability of lumbar spine following asymmetric lumbar discectomy / 医用生物力学

Objective To investigate the effect of asymmetric lumbar discectomy on facet joint force and stability of lumbar spine. Methods Seven human cadaver specimens (L2-3 segment) were selected to make intact, 1/4 discectomy and 1/2 discectomy status and applied with pure moment of 7.5 N•m. The range of motion (ROM) and facet joint force of L2-3 segment during flexion/extension, lateral bending and axial rotation were recorded, respectively. Results During extension, a significant increase in facet joint force was found under 1/4 discectomy status at the remained side. During lateral bending, the facet joint force at both sides under 1/2 discectomy status increased significantly than that under intact status. During axial rotation, facet joint force increased significantly only at the side without discectomy under 1/2 discectomy status. Except flexion, ROM under 1/4 discectomy and 1/2 discectomy status were larger than that under intact status in all the other motion directions (P<0.05). There was no significant difference in ROM between both sides during lateral bending and axial rotation direction. Conclusions The asymmetric lumbar discectomy can increase the ROM in all motion directions except flexion, and can enlarge the facet joint force asymmetrically, which indicate that instability of lumbar spine and facet joint force increasing resulted from asymmetric degeneration of the disc might lead to backache.

Robust Ag nanoplate ink for flexible electronics packaging.

Nanoinks are currently a topic of heightened interest with respect to low temperature bonding processes and printable electronics. We have developed an innovative polyvinylpyrrolidone (PVP)-stabilized Ag nanoplate ink amenable to very strong low temperature packaging, and investigated the relationship between bonding strength and electrical conductivity post-bonding. PVP shell plastic deformations observed in failure microcracks with the formation of PVP nanofibers, revealed bonding strength at low temperatures (<250 °C) was primarily due to adhesive bonding. It is found that, utilizing photonic sintering, ∼ 70 °C reduction of transformation temperature from adhesive to metallic bonding was achieved compared to that of thermal sintering. A numerical simulation was developed to better understand the influences of the light-induced heat generation, which demonstrated near-infrared light can facilitate sintering. Bonding strengths of 27 MPa were achieved at room temperatures, and 29.4 MPa at 210 °C with photonic sintering. Moreover, the anisotropic resistivity was observed with different thermal dependences. These results demonstrate Ag nanoplate inks have potential for low temperature 3D interconnections in lead-free microcircuits, flexible electronic packaging, and diverse sensing applications.

Direct writing on paper of foldable capacitive touch pads with silver nanowire inks.

Paper-based capacitive touch pads can be fabricated utilizing high-concentration silver nanowire inks needle-printed directly onto paper substrates through a 2D programmable platform. Post deposition, silver nanowire tracks can be photonically sintered using a camera flash to reduce sheet resistance similar to thermal sintering approaches. Touch pad sensors on a variety of paper substrates can be achieved with optimized silver nanowire tracks. Rolling and folding trials, which yielded only modest changes in capacitance and no loss of function, coupled with touch pad functionality on curved surfaces, suggest sufficient flexibility and durability for paper substrate touch pads to be used in diverse applications. A simplified model to predict touch pad capacitance variation ranges with differing touch conditions was developed, with good agreement against experimental results. Such paper-based touch pads have the advantage of simple structure, easy fabrication, and fast sintering, which holds promise for numerous commercial applications including low-cost portable devices where ultrathin and lightweight features, coupled with reliable bending stability are desirable.

Optical properties of Ag nanoparticle-polymer composite film based on two-dimensional Au nanoparticle array film.

The nanocomposite polyvinyl pyrrolidone (PVP) films containing Ag nanoparticles and Rhodamine 6G are prepared on the two-dimensional distinctive continuous ultrathin gold nanofilms. We investigate the optical properties and the fluorescence properties of silver nanoparticles-PVP polymer composite films influenced by Ag nanoparticles and Au nanoparticles. Absorption spectral analysis suggests that the prominently light absorption in Ag nanowire/PVP and Ag nanowire/PVP/Au film arises from the localized surface plasmon resonance of Ag nanowire and Au nanofilm. The enhanced fluorescence is observed in the presence of Ag nanowire and Au nanofilm, which is attributed to the excitation of surface plasmon polariton resonance of Ag nanowire and Au nanofilm. The gold nanofilm is proven to be very effective fluorescence resonance energy transfer donors. The fabricated novel structure, gold ultrathin continuous nanofilm, possesses high surface plasmon resonance properties and prominent fluorescence enhancement effect. Therefore, the ultrathin continuous gold nanofilm is an active substrate on nanoparticle-enhanced fluorescence.

Integrated optical gyroscope using active long-range surface plasmon-polariton waveguide resonator.

Optical gyroscopes with high sensitivity are important rotation sensors for inertial navigation systems. Here, we present the concept of integrated resonant optical gyroscope constructed by active long-range surface plasmon-polariton (LRSPP) waveguide resonator. In this gyroscope, LRSPP waveguide doped gain medium is pumped to compensate the propagation loss, which has lower pump noise than that of conventional optical waveguide. Peculiar properties of single-polarization of LRSPP waveguide have been found to significantly reduce the polarization error. The metal layer of LRSPP waveguide is electro-optical multiplexed for suppression of reciprocal noises. It shows a limited sensitivity of ~10(-4) deg/h, and a maximum zero drift which is 4 orders of magnitude lower than that constructed by conventional single-mode waveguide.

Two-dimensional ultrathin gold film composed of steadily linked dense nanoparticle with surface plasmon resonance.

BACKGROUND: Noble metallic nanoparticles have prominent optical local-field enhancement and light trapping properties in the visible light region resulting from surface plasmon resonances. RESULTS: We investigate the optical spectral properties and the surface-enhanced Raman spectroscopy of two-dimensional distinctive continuous ultrathin gold nanofilms. Experimental results show that the one- or two-layer nanofilm obviously increases absorbance in PEDOT:PSS and P3HT:PCBM layers and the gold nanofilm acquires high Raman-enhancing capability. CONCLUSIONS: The fabricated novel structure of the continuous ultrathin gold nanofilms possesses high surface plasmon resonance properties and boasts a high surface-enhanced Raman scattering (SERS) enhancement factor, which can be a robust and cost-efficient SERS substrate. Interestingly, owing to the distinctive morphology and high light transmittance, the peculiar nanofilm can be used in multilayer photovoltaic devices to trap light without affecting the physical thickness of solar photovoltaic absorber layers and yielding new options for solar cell design.