Identification and quantification of signal peptide variants in an IgG1 monoclonal antibody produced in mammalian cell lines.

Sequence variants of a monoclonal antibody resulting from incomplete processing of signal peptide were identified and characterized using multiple mass spectrometry platforms and reverse phase chromatography. Detection and quantification of these variants by three LC/MS platforms were assessed. Quantification was also performed by mass spectrometric analysis of the subunits of the antibody generated by reduction and IdeS proteolysis. Peptide mapping with LC/MS/MS detection was used to quantify and confirm the identities of signal peptide sequence variants. Although quantification of the signal peptide variants thru mass spectrometry approaches is system dependent, our data revealed the results are close to the values determined by chromatographic separation with UV detection. Each of the methods have proven effective in demonstrating the consistency of signal peptide variants levels across the manufacture history of the antibody.

Comparative study of therapeutic antibody candidates derived from mini-pool and clonal cell lines.

The long journey of developing a drug from initial discovery target identification to regulatory approval often leaves many patients with missed window of opportunities. Both regulatory agencies and biopharmaceutical industry continue to develop creative approaches to shorten the time of new drug development in order to deliver life-saving medicine to patients. Generally, drug substance materials to support the toxicology and early phase clinical study can only be manufactured after creating the final Master Cell Bank (MCB) of the clonally derived cell line, which normally takes 1-2 years. With recent advances in cell line development, cell culture process and analytical technologies, generating more homogeneous bulk/mini-pool population with higher productivity and acceptable quality attributes has become a norm, thereby making it possible to shorten the timeline to initiate First in Human (FIH) trial by using bulk/mini-pool generated materials to support toxicology and FIH studies. In this study, two monoclonal antibodies of different subclasses (IgG1 and IgG4) were expressed from the mini-pool cells as well as clonally derived cell lines generated from the same mini-pool. Cell growth, productivity, and product quality were compared between the materials generated from the mini-pool and clonally derived cell line. The results demonstrate the similarity of the antibody products generated from mini-pool cells and clonally derived cell lines from the same mini-pool, and strongly support the concept and feasibility of using antibody materials produced from mini-pool cultures for toxicology and FIH studies. The strategy to potentially shorten the FIH timeline is discussed. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1456-1462, 2017.

Characterization of TAP Ambr 250 disposable bioreactors, as a reliable scale-down model for biologics process development.

Demands for development of biological therapies is rapidly increasing, as is the drive to reduce time to patient. In order to speed up development, the disposable Automated Microscale Bioreactor (Ambr 250) system is increasingly gaining interest due to its advantages, including highly automated control, high throughput capacity, and short turnaround time. Traditional early stage upstream process development conducted in 2 - 5 L bench-top bioreactors requires high foot-print, and running cost. The establishment of the Ambr 250 as a scale-down model leads to many benefits in process development. In this study, a comprehensive characterization of mass transfer coefficient (kL a) in the Ambr 250 was conducted to define optimal operational conditions. Scale-down approaches, including dimensionless volumetric flow rate (vvm), power per unit volume (P/V) and kL a have been evaluated using different cell lines. This study demonstrates that the Ambr 250 generated comparable profiles of cell growth and protein production, as seen at 5-L and 1000-L bioreactor scales, when using kL a as a scale-down parameter. In addition to mimicking processes at large scales, the suitability of the Ambr 250 as a tool for clone selection, which is traditionally conducted in bench-top bioreactors, was investigated. Data show that cell growth, productivity, metabolite profiles, and product qualities of material generated using the Ambr 250 were comparable to those from 5-L bioreactors. Therefore, Ambr 250 can be used for clone selection and process development as a replacement for traditional bench-top bioreactors minimizing resource utilization during the early stages of development in the biopharmaceutical industry. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:478-489, 2017.

CHO cells knocked out for TSC2 display an improved productivity of antibodies under fed batch conditions.

The kinase mTOR operates in two cellular complexes, mTORC1 and mTORC2. mTORC1 adjusts metabolic activity according to external growth conditions and nutrients availability. When conditions are prosperous, mTOR facilitates protein and lipid biosyntheses and inhibits autophagy, while under metabolic constraints, however, its attenuation induces a catabolic program, energy preservation and autophagy. CHO is a key cell line for manufacturing of biologics owing to its remarkable ability to grow to high densities and maintain protein production and secretion for extended times. While high mTOR activity has been associated with high productivity in CHO cells, its inhibition by rapamycin has also been documented to augment productivity via promotion of viability. Here using CRISPR/Cas9 editing we engineered CHO cells to enforce high mTORC1 activity by knocking-out TSC2, a major mTOR inhibitory protein, or PTEN, a phosphatase that attenuates the PI3K/AKT/mTOR pathway. Only TSC2-deleted cells exhibited a constitutive activation of mTORC1 under fed batch conditions. Cells grew larger in size, synthesized more proteins and displayed an over twofold elevation in their specific productivity. While peak viable cell density was compromised, overall titers increased to an extent dependent upon the parental clone. Our data underscore manipulation of TSC as a strategy to improve performance of CHO cell in bioreactors. Biotechnol. Bioeng. 2016;113: 1942-1952. © 2016 Wiley Periodicals, Inc.

Industry view on the relative importance of "clonality" of biopharmaceutical-producing cell lines.

Recently, several health authorities have requested substantial detail from sponsor firms regarding the practices employed to generate the production cell line for recombinant DNA-(rDNA) derived biopharmaceuticals. Two possible inferences from these regulatory agency questions are that (1) assurance of "clonality" of the production cell line is of major importance to assessing the safety and efficacy of the product and (2), without adequate proof of "clonality", additional studies of the cell line and product are often required to further ensure the product's purity and homogeneity. Here we address the topic of "clonality" in the broader context of product quality assurance by current technologies and practices, as well as discuss some of the relevant science and historical perspective. We agree that the clonal derivation of a production cell line is one factor with potential impact, but it is only one of many factors. Further, we believe that regulatory emphasis should be primarily placed on ensuring product quality of the material actually administered to patients, and on ensuring process consistency and implementing appropriate control strategies through the life cycle of the products.

Caprylic acid-induced impurity precipitation from protein A capture column elution pool to enable a two-chromatography-step process for monoclonal antibody purification.

This article presents the use of caprylic acid (CA) to precipitate impurities from the protein A capture column elution pool for the purification of monoclonal antibodies (mAbs) with the objective of developing a two chromatography step antibody purification process. A CA-induced impurity precipitation in the protein A column elution pool was evaluated as an alternative method to polishing chromatography techniques for use in the purification of mAbs. Parameters including pH, CA concentrations, mixing time, mAb concentrations, buffer systems, and incubation temperatures were evaluated on their impacts on the impurity removal, high-molecular weight (HMW) formation and precipitation step yield. Both pH and CA concentration, but not mAb concentrations and buffer systems, are key parameters that can affect host-cell proteins (HCPs) clearance, HMW species, and yield. CA precipitation removes HCPs and some HMW species to the acceptable levels under the optimal conditions. The CA precipitation process is robust at 15-25°C. For all five mAbs tested in this study, the optimal CA concentration range is 0.5-1.0%, while the pH range is from 5.0 to 6.0. A purification process using two chromatography steps (protein A capture column and ion exchange polishing column) in combination with CA-based impurity precipitation step can be used as a robust downstream process for mAb molecules with a broad range of isoelectric points. Residual CA can be effectively removed by the subsequent polishing cation exchange chromatography.

Effects of glutamine and asparagine on recombinant antibody production using CHO-GS cell lines.

A unique and nontraditional approach using glutamine and asparagine supplements for CHO-glutamine synthetase (GS) cell lines was studied. In our experiments, we found that a decrease in pH and an increase in cell death occurred in production phase of a GS cell line, leading to reduced antibody expression and lower antibody yields. The experimental results and the statistical analysis (ANOVA) indicated that additions of glutamine and asparagine in the basal and feed media were effective to buffer the cell culture pH, reduce lactate generation, maintain a higher cell viability profile, and improve antibody productivity. In bench-top bioreactors, glutamine and asparagine supplementation helped to prevent cell death, improve antibody yield, and reduce base usage. Glutamine is normally excluded from culture media for GS cell lines to prevent the bypass of selection pressure. In this study, however, the addition of glutamine did not affect cell population homogeneity, protein quality, or decrease antibody yield of two GS cell lines.

Hydrogen/deuterium exchange mass spectrometry for probing higher order structure of protein therapeutics: methodology and applications.

The higher order structure of protein therapeutics can be interrogated with hydrogen/deuterium exchange mass spectrometry (HDX-MS). HDX-MS is now a widely used tool in the structural characterization of protein therapeutics. In this review, HDX-MS based workflows designed for protein therapeutic discovery and development processes are presented, focusing on the specific applications of epitope mapping for protein/drug interactions and biopharmaceutical comparability studies. Future trends in the application of HDX-MS in protein therapeutics characterization are also described.

A safe, effective, and facility compatible cleaning in place procedure for affinity resin in large-scale monoclonal antibody purification.

Cleaning-in-place (CIP) for column chromatography plays an important role in therapeutic protein production. A robust and efficient CIP procedure ensures product quality, improves column life time and reduces the cost of the purification processes, particularly for those using expensive affinity resins, such as MabSelect protein A resin. Cleaning efficiency, resin compatibility, and facility compatibility are the three major aspects to consider in CIP process design. Cleaning MabSelect resin with 50mM sodium hydroxide (NaOH) along with 1M sodium chloride is one of the most popular cleaning procedures used in biopharmaceutical industries. However, high concentration sodium chloride is a leading cause of corrosion in the stainless steel containers used in large scale manufacture. Corroded containers may potentially introduce metal contaminants into purified drug products. Therefore, it is challenging to apply this cleaning procedure into commercial manufacturing due to facility compatibility and drug safety concerns. This paper reports a safe, effective and environmental and facility-friendly cleaning procedure that is suitable for large scale affinity chromatography. An alternative salt (sodium sulfate) is used to prevent the stainless steel corrosion caused by sodium chloride. Sodium hydroxide and salt concentrations were optimized using a high throughput screening approach to achieve the best combination of facility compatibility, cleaning efficiency and resin stability. Additionally, benzyl alcohol is applied to achieve more effective microbial control. Based on the findings, the recommended optimum cleaning strategy is cleaning MabSelect resin with 25 mM NaOH, 0.25 M Na2SO4 and 1% benzyl alcohol solution every cycle, followed by a more stringent cleaning using 50 mM NaOH with 0.25 M Na2SO4 and 1% benzyl alcohol at the end of each manufacturing campaign. A resin life cycle study using the MabSelect affinity resin demonstrates that the new cleaning strategy prolongs resin life time and consistently delivers high purity drug products.

Characterization and identification of alanine to serine sequence variants in an IgG4 monoclonal antibody produced in mammalian cell lines.

Low levels of alanine to serine sequence variants were identified in an IgG4 monoclonal antibody by ultra/high performance liquid chromatography and tandem mass spectrometry. The levels of the identified sequence variants A183S and A152S, both in the light chain, have been determined to be 7.8-9.9% and 0.5-0.6%, by extracted ion currents of the tryptic peptides L16 and L14, respectively. The A183S variant was confirmed through tryptic map spiking experiments using synthetic peptide, SDYEK, which incorporated Ser at the position of native Ala in the tryptic peptide L16. Both mutations were also observed by endoproteinase Asp-N peptide mapping. The variant level of A183S was also quantified by LC-UV with detection at 280nm and fluorescence detection of tyrosine residues on the tryptic peptides. The results from LC-MS, UV, and fluorescence detection are in close agreement with each other. The levels of the sequence variants are comparable among the antibody samples manufactured at different scales as well as locations, indicating that the variants' levels are not affected by manufacture scale or locations. DNA sequencing of the master cell bank revealed the presence of mixed bases at position 183 encoding both wild and mutated populations, whereas bases encoding the minor sequence variant at position 152 were not detected. The root cause for A152S mutation is not yet clearly understood at this moment.

Evaporative light scattering detection based HPLC method for the determination of polysorbate 80 in therapeutic protein formulations.

An evaporative light scattering detection (ELSD) based high-performance liquid chromatography (HPLC) method is developed for the determination of polysorbate 80 (tween 80) in therapeutic protein formulations. The method is simple and overcomes the difficulties associated with specificity and sensitivity. The method is suitable for the quantitation of polysorbate 80 in the usual formulation range (0.01-0.1%) as well as in trace amounts ≥13 µg/mL. The analysis is based on the removal of protein first by solid-phase extraction using Oasis HLB cartridges followed by HPLC analysis using Inertsil ODS-3 C 18 column (4.6×150 mm, 5 µm) using reversed-phase conditions. The detector response changes exponentially with an increase in polysorbate concentration. A very good linear fit of log ELSD response against log polysorbate 80 concentration is observed. The specificity, sensitivity, precision, and accuracy of the method are suitable for the quantitation of polysorbate 80 in protein formulations.

Glycine to glutamic acid misincorporation observed in a recombinant protein expressed by Escherichia coli cells.

A novel amino acid misincorporation, in which the intended glycine (Gly) residues were replaced by a glutamic acid (Glu), was observed in a recombinant protein expressed by Escherichia coli. The misincorporation was identified by peptide mapping and liquid chromatography-tandem mass spectrometric analysis on proteolyzed peptides of the protein and verified using the corresponding synthetic peptides containing the misincorporated residues. Analysis of the distribution of the misincorporated residues and their codon usage shows strong correlation between this misincorporation and the use of rarely used codon within the E. coli expression system. Results in this study suggest that the usage of the rare codon GGA has resulted in a Glu for Gly misincorporation.

Quantitative analysis of tris(2-carboxyethyl)phosphine by anion-exchange chromatography and evaporative light-scattering detection.

Tris(2-carboxyethyl)phosphine (TCEP) belongs to the trialkylphosphine class of reducing agents that are widely used in research and industry. In this paper, we discuss a sensitive high-performance liquid chromatography (HPLC) method equipped with an evaporative light scattering detector (ELSD) for the determination of TCEP in pharmaceutical samples containing therapeutic protein and stabilizing additives. TCEP was first completely oxidized with hydrogen peroxide to form TCEP oxide (TCEPO). Proteins and salts were removed from the sample by solid phase extraction. TCEPO concentrations were determined by anion exchange chromatography coupled with ELSD. Because of the 1:1 oxidation stoichiometry for the reaction, the concentration of TCEP in the sample is directly proportional to the measured concentration of TCEPO. A good linearity fit of ELSD response versus TCEPO concentration was observed over the range of 20-2000 µM. The specificity, precision, accuracy, and robustness of the method were evaluated and suitable for the quantitation of TCEP in biological samples. Moreover, selective treatment with peroxide prior to solid-phase extraction may be used to determine the mass balance of TCEP species or track the oxidation rate in pharmaceutical samples.

Characterization of glycosylation sites for a recombinant IgG1 monoclonal antibody and a CTLA4-Ig fusion protein by liquid chromatography-mass spectrometry peptide mapping.

Liquid chromatography mass spectrometry (LC-MS) peptide mapping can be a versatile technique for characterizing protein glycosylation sites without the need to remove the attached glycans as in conventional oligosaccharide mapping methods. In this way, both N-linked and O-linked sites of glycosylation can each be directly identified, characterized, and quantified by LC-MS as intact glycopeptides in a single experiment. LC-MS peptide mapping of the individual glycosylation sites avoids many of the limitations of preparing and analyzing an entire pool of released N-linked oligosaccharides from all sites mixed together. In this study, LC interfaced to a linear ion trap mass spectrometer (ESI-LIT-MS) were used to characterize the glycosylation of a recombinant IgG1 monoclonal antibody and a CTLA4-Ig fusion protein with multiple sites of N-and O-glycosylation. Samples were reduced, S-carboxyamidomethylated, and cleaved with either trypsin or endoproteinase Asp-N. Enhanced detection for minor IgG1 glycoforms (∼0.1 to 1.0 mol% level) was obtained by LC-MS of the longer 32-residue Asp-N glycopeptide (4+ protonated ion) compared to the 9-residue tryptic glycopeptide (2+ ion). LC-MS peptide mapping was run according to a general procedure: (1) Locate N-linked and/or O-linked sites of glycosylation by selected-ion-monitoring of carbohydrate oxonium fragment ions generated by ESI in-source collision-induced dissociation (CID), i.e. 204, 366, and 292 Da marker ions for HexNAc, HexNAc-Hex, and NeuAc, respectively; (2) Characterize oligosaccharides at each site via MS and MSMS. Use selected ion currents (SIC) to estimate relative amounts of each glycoform; and (3) Measure the percentage of site-occupancy by searching for any corresponding nonglycosylated peptide.

NMR-based metabolomics of mammalian cell and tissue cultures.

NMR spectroscopy was used to evaluate growth media and the cellular metabolome in two systems of interest to biomedical research. The first of these was a Chinese hamster ovary cell line engineered to express a recombinant protein. Here, NMR spectroscopy and a quantum mechanical total line shape analysis were utilized to quantify 30 metabolites such as amino acids, Krebs cycle intermediates, activated sugars, cofactors, and others in both media and cell extracts. The impact of bioreactor scale and addition of anti-apoptotic agents to the media on the extracellular and intracellular metabolome indicated changes in metabolic pathways of energy utilization. These results shed light into culture parameters that can be manipulated to optimize growth and protein production. Second, metabolomic analysis was performed on the superfusion media in a common model used for drug metabolism and toxicology studies, in vitro liver slices. In this study, it is demonstrated that two of the 48 standard media components, choline and histidine are depleted at a faster rate than many other nutrients. Augmenting the starting media with extra choline and histidine improves the long-term liver slice viability as measured by higher tissues levels of lactate dehydrogenase (LDH), glutathione and ATP, as well as lower LDH levels in the media at time points out to 94 h after initiation of incubation. In both models, media components and cellular metabolites are measured over time and correlated with currently accepted endpoint measures.

A tris (2-carboxyethyl) phosphine (TCEP) related cleavage on cysteine-containing proteins.

Introduced in the late 1980s as a reducing reagent, Tris (2-carboxyethyl) phosphine (TCEP) has now become one of the most widely used protein reductants. To date, only a few studies on its side reactions have been published. We report the observation of a side reaction that cleaves protein backbones under mild conditions by fracturing the cysteine residues, thus generating heterogeneous peptides containing different moieties from the fractured cysteine. The peptide products were analyzed by high performance liquid chromatography and tandem mass spectrometry (LC/MS/MS). Peptides with a primary amine and a carboxylic acid as termini were observed, and others were found to contain amidated or formamidated carboxy termini, or formylated or glyoxylic amino termini. Formamidation of the carboxy terminus and the formation of glyoxylic amino terminus were unexpected reactions since both involve breaking of carbon-carbon bonds in cysteine.

Characterization of S-thiolation on secreted proteins from E. coli by mass spectrometry.

S-thiolation is a reversible post-translational modification in which thiol metabolites of low molecular masses are linked to protein sulfhydryl groups through disulfide bonds. This modification is commonly observed in recombinant proteins secreted from E. coli cells. Since it can alter protein functions and introduce molecular heterogeneity, S-thiolation is undesirable for recombinant protein production. To date, few published studies have characterized thiol modifiers or investigated the mechanism of S-thiolation in recombinant proteins. In this work, reversed-phase liquid chromatography and mass spectrometry were used to characterize four of the most abundant thiol modifiers on recombinant proteins secreted from E. coli BL21 (DE3) strain. These thiol modifiers have been identified as glutathione, 4-phosphopantetheine, gluconoylated glutathione, and dephosphorylated coenzyme A. S-thiolation by these thiol modifiers increases protein mass by 305, 356, 483, and 685 Da, respectively. These specific mass increases can be used as markers for identifying S-thiolation in recombinant proteins.

Ion-pair reversed-phase high-performance liquid chromatography analysis of oligonucleotides: retention prediction.

An ion-pair reversed-phase HPLC method was evaluated for the separation of synthetic oligonucleotides. Mass transfer in the stationary phase was found to be a major factor contributing to peak broadening on porous C18 stationary phases. A small sorbent particle size (2.5 microm), elevated temperature and a relatively slow flow-rate were utilized to enhance mass transfer. A short 50 mm column allows for an efficient separation up to 30mer oligonucleotides. The separation strategy consists of a shallow linear gradient of organic modifier, optimal initial gradient strength, and the use of an ion-pairing buffer. The triethylammonium acetate ion-pairing mobile phases have been traditionally used for oligonucleotide separations with good result. However, the oligonucleotide retention is affected by its nucleotide composition. We developed a mathematical model for the prediction of oligonucleotide retention from sequence and length. We used the model successfully to select the optimal initial gradient strength for fast HPLC purification of synthetic oligonucleotides. We also utilized ion-pairing mobile phases comprised of triethylamine (TEA) buffered by hexafluoroisopropanol (HFIP). The TEA-HFIP aqueous buffers are useful for a highly efficient and less sequence-dependent separation of heterooligonucleotides.