Development and Characterization of Polylactic Acid (PLA)-Based Nanocomposites Used for Food Packaging.

The present study is focused on polylactic acid (PLA) blending with bio nanoadditives, such as Tonsil® (clay) and Aerosil®, to obtain nanocomposites for a new generation of food packaging. The basic composition was enhanced using Sorbitan oleate (E494) and Proviplast as plasticizers, increasing the composite samples' stability and their mechanical strength. Four mixtures were prepared: S1 with Tonsil®; S2 with Aerosil®; S3 with Aerosil® + Proviplast; and S4 with Sabosorb. They were complexly characterized by FT-IR spectroscopy, differential scanning calorimetry, mechanical tests on different temperatures, and absorption of the saline solution. FTIR shows a proper embedding of the filler component into the polymer matrix and DSC presents a good stability at the living body temperature for all prepared samples. Micro and nanostructural aspects were evidenced by SEM and AFM microscopy, revealing that S3 has the most compact and uniform filler distribution and S4 has the most irregular one. Thus, S3 evidenced the best diametral tensile strength and S4 evidenced the weakest values. All samples present the best bending strength at 18 °C and fair values at 4 °C, with the best values being obtained for the S1 sample and the worst for S4. The lack of mechanical strength of the S4 sample is compensated by its best resistance at liquid penetration, while S1 is more affected by the liquid infiltrations. Finally, results show that PLA composites are suitable for biodegradable and disposable food packages, and the desired properties could be achieved by proper adjustment of the filler proportions.

Recycled PET Composites Reinforced with Stainless Steel Lattice Structures Made by AM.

Polyethylene terephthalate (PET) recycling is one of the most important environmental issues, assuring a cleaner environment and reducing the carbon footprint of technological products, taking into account the quantities used year by year. The recycling possibilities depend on the quality of the collected material and on the targeted product. Current research aims to increase recycling quantities by putting together recycled PET in an innovative way as a filler for the additive manufactured metallic lattice structure. Starting from the structures mentioned above, a new range of composite materials was created: IPC (interpenetrating phase composites), materials with a complex architecture in which a solid phase, the reinforcement, is uniquely combined with the other phase, heated to the temperature of melting. The lattice structure was modeled by the intersection of two rings using Solid Works, which generates the lattice structure, which was further produced by an additive manufacturing technique from 316L stainless steel. The compressive strength shows low values for recycled PET, of about 26 MPa, while the stainless-steel lattice structure has about 47 MPa. Recycled PET molding into the lattice structure increases its compressive strength at 53 MPa. The Young's moduli are influenced by the recycled PET reinforcement by an increase from about 1400 MPa for the bare lattice structure to about 1750 MPa for the reinforced structure. This sustains the idea that recycled PET improves the composite elastic behavior due to its superior Young's modulus of about 1570 MPa, acting synergically with the stainless-steel lattice structure. The morphology was investigated with SEM microscopy, revealing the binding ability of recycled PET to the 316L surface, assuring a coherent composite. The failure was also investigated using SEM microscopy, revealing that the microstructural unevenness may act as a local tensor, which promotes the interfacial failure within local de-laminations that weakens the composite, which finally breaks.

Manganese SOD mimics are effective against heat stress in a mutant fission yeast deficient in mitochondrial superoxide dismutase.

UNLABELLED: Previous studies revealed a close connection between heat shock and manganese-dependent superoxide dismutase (SOD2) in eukaryotes. This paper shows that SOD mimics based on manganese complexes caused an increase in thermotolerance for a mutant fission yeast deficient in mitochondrial superoxide dismutase. Manganese compounds used for tests are SOD mimics, from two different classes: salen manganese (EUK-8) and Mn porphyrin (Mn(III)TE-2-PyP(5+)). The tests were conducted using a Schizosaccharomyces pombe model, comparing the viability of two strains at chronic heat stress (37°C)--a wild type versus a strain with the mitochondrial superoxide dismutase gene deleted [SOD2(-)]. The presence of massive free radical species in S. pombe SOD2(-) was demonstrated using a luminol-enhanced chemiluminescence test derived from a menadione-mediated survival protocol. CONCLUSIONS: Survival tests revealed that the SOD2-deleted S. pombe is about 100 times more sensitive to heat stress than the wild-type strain. This survival deficit can be corrected by EUK-8 and Mn(III)TE-2-PyP(5+) to almost the same degree but not by manganese chloride II (MnCl(2)). Using a simple spot assay for viability testing, this new model proved to be an easy alternative for the initial estimation of manganese SOD mimics efficiency.

Antifungal susceptibility of 95 yeast strains isolated from oral mycoses in HIV-negative and HIV-positive patients.

The aim of this study is to evaluate the susceptibility profile to many antifungal drugs of 95 yeast strains isolated from oral mycoses in HIV-negative and HIV-positive patients from the eastern region of Romania. The antifungal drugs tested against all strains were 5-flucytosine (5FC), amphotericin B (AMB), fluconazole (FCA) and itraconazole (ITR), using ATB fungus2 devices (bioMérieux, France). For strains isolated from HIV-positive patients, two new antifungals were tested--voriconazole (VOR) and caspofungine (CAS), using Etest strips. The significance of results (MIC values) has been evaluated according to EUCAST and CLSI recommendations. The percent of resistance varied as follow: 6.31% for 5FC, 0% for AMB, 10.52% for FCA, 20% for ITR, 0% for VOR and O% for CAS. We can observe that all strains isolated from HIV-positive patients are susceptible to VOR and CAS--new antifungal molecules recently marketed. Also, the percent of resistance to current azoles (especially ITR) is relatively high.

In Schizosaccharomyces pombe the 14-3-3 protein Rad24p is involved in negative control of pho1 gene expression.

Expression of Schizosaccharomyces pombe pho1-encoded acid phosphatase is transcriptionally regulated by adenine and phosphate. Four genes, anr1-3 and anr5, encode negative regulators of pho1 expression. Apart from being designated as loci, the anr genes have not been further characterized. In this study we provide evidence that a strain carrying the deletion of rad24, a 14-3-3 protein-encoding gene, exhibits an anr mutant like the phenotype (higher phosphatase activity, higher transcript levels of pho1, lower sensitivity to adenine of pho1 expression) and that rad24 is closely linked, probably allelic, to anr5. By sequencing the two exons of the rad24 gene in a strain carrying the mutant allele anr5-13, we found a T/A-to-C/G transition in the 225th codon of its ORF, causing a leucine-to-serine substitution in a highly conserved region of all proteins of the 14-3-3 family. anr2 and anr3 are not allelic to rad24. The mutant alleles of anr2 and anr3 are recessive to their wild-type alleles and do not belong to the same epistasis group as rad24.

Inositol is specifically involved in the sexual program of the fission yeast Schizosaccharomyces pombe.

The fission yeast Schizosaccharomyces pombe is a natural auxotroph for inositol and fails to grow in the complete absence of it. It was previously reported that a small concentration of inositol in the culture medium supports vegetative growth, but not mating and sporulation, and a tenfold of that concentration also supports mating and sporulation. The purpose of the present work was to investigate whether a moderate inositol starvation specifically affected events of the sexual program of development. A homothallic culture grown to the stationary phase in medium with a small inositol concentration was sterile but cells in the stationary phase of growth synchronously entered and completed the sexual cycle when inositol was added, without need of previous cell divisions. This suggests the involvement of inositol in a mechanism (or mechanisms) of the sexual program. The events of the program that were affected by inositol starvation were investigated. Commitment to mating and production of pheromone M were shown not to be inositol-dependent. A diploid strain homozygous at the mating-type locus and carrying a pat1-114 temperature-sensitive mutation in homozygous configuration sporulated under inositol starvation at the restrictive temperature; therefore starvation did not directly affect meiosis or sporulation. In contrast, production of pheromone P and the response of cells to pheromones were found to be inositol-dependent. The possibility that inositol or one of its derivative compounds is involved in pheromone P secretion and in pheromone signal reception is discussed.

Dynamic scaling method and interface growth.

The dynamic scaling approach is an important tool for describing the time evolution of rough interfaces. It computes dynamic scaling parameters alpha and beta, which characterize surface and time correlations. Applications of dynamic scaling to random deposition and ballistic deposition are discussed. A model of random adsorption on fractal substrates is presented. Then the influence of surface diffusion on adsorption is analyzed. The dependence of alpha and beta on the substrate fractal dimension, together with the dependence of the fractal dimension of the gas-solid interface on adsorption coverage are computed.