Production of safe cyanobacterial biomass for animal feed using wastewater and drinking water treatment residuals.

The growing interest in microalgae and cyanobacteria biomass as an alternative to traditional animal feed is hindered by high production costs. Using wastewater (WW) as a cultivation medium could offer a solution, but this approach risks introducing harmful substances into the biomass, leading to significant safety concerns. In this study, we addressed these challenges by selectively extracting nitrates and phosphates from WW using drinking water treatment residuals (DWTR) and chitosan. This method achieved peak adsorption capacities of 4.4 mg/g for nitrate and 6.1 mg/g for phosphate with a 2.5 wt% chitosan blend combined with DWTR-nitrogen. Subsequently, these extracted nutrients were employed to cultivate Spirulina platensis, yielding a biomass productivity rate of 0.15 g/L/d, which is comparable to rates achieved with commercial nutrients. By substituting commercial nutrients with nitrate and phosphate from WW, we can achieve a 18 % reduction in the culture medium cost. While the cultivated biomass was initially nitrogen-deficient due to low nitrate levels, it proved to be protein-rich, accounting for 50 % of its dry weight, and contained a high concentration of free amino acids (1260 mg/g), encompassing all essential amino acids. Both in vitro and in vivo toxicity tests affirmed the biomass's safety for use as an animal feed component. Future research should aim to enhance the economic feasibility of this alternative feed source by developing efficient adsorbents, utilizing cost-effective reagents, and implementing nutrient reuse strategies in spent mediums.

Complete genome sequence of Moraxella sp. strain DOX410, a bacterium potentially degrading 1,4-dioxane isolated from river sediment.

Moraxella sp. strain DOX410 was isolated from a systematic enrichment culture to investigate strains with 1,4-dioxane degradation potential. The genome of strain DOX410 consists of five complete contigs and contained genes related to degradation of the aromatic ring structure of 1,4-dioxane.

Complete Genome Sequence of Bisphenol A-Degrading Bacterium Sphingobium sp. Strain A3, Isolated from Contaminated Soil.

This study reports the complete genome sequence of bisphenol A-degrading bacterium Sphingobium sp. strain A3, which was isolated from a contaminated soil sample from the site of a factory fire in South Korea. The genome consists of a 6.53-Mbp chromosome and eight plasmid contigs (532,947 bp), with 6,406 protein-coding sequences and a GC content of 63.82%.

Complete Genome Sequence of Gordonia rubripertincta SD5, a Soil Bacterium Isolated from a Di-(2-Ethylhexyl) Phthalate-Degrading Enrichment Culture.

We report the complete genome sequence of Gordonia rubripertincta SD5, isolated from a soil-derived di-(2-ethylhexyl) phthalate-degrading enrichment culture. The final genome assembly consists of a 5.10-Mbp chromosome and a plasmid (159 kbp). A total of 4,814 coding sequences were predicted, including 4,741 protein-coding sequences.

Enhanced removal of cesium by potassium-starved microalga, Desmodesmus armatus SCK, under photoheterotrophic condition with magnetic separation.

This study investigated the feasibility of using photoheterotrophic microalga, Desmodesmus armatus SCK, for removal of cesium (Cs+) followed by recovery process using magnetic nanoparticles. The comparison of three microalgae results indicated that D. armatus SCK removed the most Cs+ at both 25 °C and 10 °C. The results also revealed that the use of microalga grown in potassium (K+)-starved condition improves the accumulation of Cs+. Heterotrophic mode with addition of volatile fatty acids (VFAs), especially acetic acids (HAc), also enhanced removal of Cs+ by K+-starved D. armatus SCK; maximum removal efficiency of Cs+ was almost 2-fold higher than that of cells grown without organic carbon source. The Cs+ taken up by this microalga was efficiently harvested using magnetic nanoparticles, polydiallyldimethylammonium (PDDA)-FeO3. Finally, this strain eliminated more than 99% of radioactive 137Cs from solutions of 10, 100, and 1000 Bq mL-1. Therefore, use of K+-starved microalga, D. armatus SCK, with VFAs could be promising means to remove the Cs from the liquid wastes.

Complete Genome Sequence of Lactobacillus harbinensis Strain NSMJ42, Isolated from Makgeolli, a Traditional Korean Alcoholic Beverage.

In the present work, we report the complete genome sequence of Lactobacillus harbinensis NSMJ42, isolated from makgeolli (a Korean traditional alcoholic beverage) in South Korea. The final genome assembly consists of a 3.29-Mbp chromosome with 3,082 protein-coding sequences and a G+C content of 53.36%.

Removal of radioactive cesium from an aqueous solution via bioaccumulation by microalgae and magnetic separation.

We evaluated the potential sequestration of cesium (Cs+) by microalgae under heterotrophic growth conditions in an attempt to ultimately develop a system for treatment of radioactive wastewater. Thus, we examined the effects of initial Cs+ concentration (100-500 µM), pH (5-9), K+ and Na+ concentrations (0-20 mg/L), and different organic carbon sources (acetate, glycerol, glucose) on Cs+ removal. Our initial comparison of nine microalgae indicated that Desmodesmus armatus SCK had removed the most Cs+ under various environmental conditions. Addition of organic substrates significantly enhanced Cs+ uptake by D. armatus, even in the presence of a competitive cation (K+). We also applied magnetic nanoparticles coated with a cationic polymer (polyethylenimine) to separate 137Cs-containing microalgal biomass under a magnetic field. Our technique of combining bioaccumulation and magnetic separation successfully removed more than 90% of the radioactive 137Cs from an aqueous medium. These results clearly demonstrate that the method described here is a promising bioremediation technique for treatment of radioactive liquid waste.

Synthesis of carboxymethylated nanocellulose fabricated ciprofloxacine - Montmorillonite composite for sustained delivery of antibiotics.

Montmorillonite (MMT) is a highly promising material for use in drug delivery due to its high drug loading capacity and controlled drug release properties. MMT protects drug molecules between layered structure; however, drug release from MMT is sustained less than 6 h, which is insufficient for the release of antibiotics. This study sought to synthesize an antibiotic delivery material with more sustained release properties. A ciprofloxacin (CIP)-MMT composite was fabricated using carboxymethylated nanocellulose (CMCNF). A simple adsorption reaction intercalated 31.1% of CIP molecules present into the MMT under optimized conditions (pH 5, CIP = 1000 mg/L, Reaction time = 3 h). The synthesized CIP-MMT composite was fabricated using 1.5, 2, or 3 wt% CMCNF. Increasing the CMCNF content delayed the erosion of the CMCNF matrix and prevented rapid dissolution of the CIP-MMT composite. In vitro release experiments revealed that the CIP-MMT composite material provided the sustained release of CIP over 6 h. Erosion of the 3 wt% CMCNF-CIP-MMT composite occurred slowly and provided 48 h of sustained CIP release. An anti-bacterial test revealed that the 3 wt% CMCNF-CIP-MMT composite displayed the most constant antibacterial activity over 12 days. These results demonstrated that the CMCNF prepared with CIP intercalation in MMT was highly effective in prolonging the antibiotic release.

Complete Genome Sequence of Leuconostoc kimchii Strain NKJ218, Isolated from Homemade Kimchi.

Leuconostoc kimchii strain NKJ218 was isolated from homemade kimchi in South Korea. The whole genome was sequenced using the PacBio RS II and Illumina NovoSeq 6000 platforms. Here, we report a genome sequence of strain NKJ218, which consists of a 1.9-Mbp chromosome and three plasmid contigs. A total of 2,005 coding sequences (CDS) were predicted, including 1,881 protein-coding sequences.

The potential of a natural biopolymeric flocculant, ε-poly-L-lysine, for harvesting Chlorella ellipsoidea and its sustainability perspectives for cost and toxicity.

The successful production of microalgal biomass requires the precise coordination of many different steps. Cell harvesting is a central process in all methods currently used for the production of microalgal biomass. Therefore, improving the harvesting process itself, and using a harvesting method that is compatible with adjacent steps, is necessary to prevent problems that may occur during downstream processing. This study examined the potential of the cationic biopolymer ε-poly-L-lysine (ε-PLL) for use in the harvest of microalgae (Chlorella ellipsoidea). The effects of ε-PLL concentration and mixing intensity on flocculation efficiency and operating costs were determined. We found that ε-PLL was not toxic to microalgal cells at concentrations of up to 25 mg/L, based on the photosystem II quantum yield. A recovery rate of 95% was achieved using 19 mg/L ε-PLL, and the estimated harvest cost was 20 US$/ton of harvested biomass. Moreover, ε-PLL displayed antimicrobial properties, leaving the harvested biomass intact and pure. Therefore, the use of ε-PLL-induced flocculation appears to be an attractive option when harvesting microalgal biomass for use as low- and high-value commodities for humans or animals.

Carbon balance of major volatile fatty acids (VFAs) in recycling algal residue via a VFA-platform for reproduction of algal biomass.

The feasibility of a carbon recycling system that transforms algal residue to volatile fatty acids (VFAs) for re-cultivating microalgae was evaluated based on a carbon balance analysis of major VFAs consisting of acetate (HAc), propionate (HPr), and butyrate (HBu). This system largely involves two processes: (i) bioconversion of algal residue to VFAs by anaerobic fermentation, and (ii) cultivation of microalgae using the produced VFAs. The carbon balance for each unit process was examined to assess how much carbon in algal residue can be converted to these major VFAs and then assimilated to microalgae biomass. First, the yield and the profile of VFAs from raw algae (RA) and lipid-extracted algae (LEA) at psychrophilic (15 °C), mesophilic (35 °C), and thermophilic conditions (55 °C) were compared. When digesting the LEA under the thermophilic condition, the highest conversion yield, 0.36 (g carbon in VFAs/g carbon in biomass), with a compositional ratio of 6:1:3 (HAc: HPr: HBu) was obtained. Consumption of VFAs for microalgal growth reached a maximum value of 0.66 (g VFAs assimilated to biomass/g VFAs provided) at the compositional ratio of 6:1:3. Consequently, the maximum total carbon recycling ratio was 23.8% when fermenting LEA at the thermophilic condition. Our findings comprehensively revealed that establishing conditions that convert LEA to higher content of acetate is a decisive factor. It was estimated that around 40% of the total carbon from the LEA can be recovered for the production of algal biomass, when increasing the VFA conversion yield beyond 60% by adopting pretreatment methods.

Companilactobacillus pabuli sp. nov., a lactic acid bacterium isolated from animal feed.

A Gram-positive, facultative anaerobic, catalase-negative, non-motile, non-spore-forming and rod-shaped lactic acid bacterium strain, denoted as NFFJ11T and isolated from total mixed fermentation feed in the Republic of Korea, was characterized through polyphasic approaches, including sequence analyses of the 16S rRNA gene and housekeeping genes (rpoA and pheS), determination of average nucleotide identity and in silico DNA-DNA hybridization, fatty acid methyl ester analysis, and phenotypic characterization. Phylogenetic analyses based on 16S rRNA, rpoA and pheS gene sequences revealed that strain NFFJ11T belonged to the genus Companilactobacillus. The 16S rRNA gene sequence of strain NFFJ11T exhibited high similarity to Companilactobacillus formosensis S215T (99.66 %), Companilactobacillus farciminis Rv4 naT (99.53 %), Companilactobacillus crustorum LMG 23699T (99.19 %), Companilactobacillus futsaii YM 0097T (99.06 %), Companilactobacillus zhachilii HBUAS52074T (98.86 %) and Companilactobacillus heilongiiangensis S4-3T (98.66 %). However, average nucleotide identity and in silico DNA-DNA hybridization values for these type strains were in the range of 79.90-92.93 % and 23.80-49.30 %, respectively, which offer evidence that strain NFFJ11T belongs to a novel species of the genus Companilactobacillus. The cell-wall peptidoglycan type was A4α (l-Lys-d-Asp) and the G+C content of the genomic DNA was 35.7 mol%. The main fatty acids of strain NFFJ11T were C18 : 1 ω9c (43.3 %), C16 : 0 (20.1 %) and summed feature 7 (18.3 %; comprising any combination of C19 : 1 ω7c, C19 : 1 ω6c and C19 : 0 cyclo ω10c). Through polyphasic taxonomic analysis, it was observed that strain NFFJ11T represents a novel species belonging to the genus Companilactobacillus, for which the name Companilactobacillus pabuli sp. nov. is proposed. The type strain is NFFJ11T (= KACC 21771T= JCM 34088T).

Harvesting and contamination control of microalgae Chlorella ellipsoidea using the bio-polymeric flocculant α-poly-l-lysine.

Microalgae have been extensively studied for the production of various products. However, to date, microalgal biomass has not become economically feasible, mainly due to different issues such as contamination from various sources that occurs during downstream processes, and which leads to low quality biomass with limited application. In this study, to overcome contamination by flocculants and other microorganisms, the cationic biopolymer α-Poly-l-lysine (α-PLL) was applied. The cationic amine moiety and polymeric chain of α-PLL rendered microalgal harvesting efficient. With increasing α-PLL chain length, efficient dose- and time-dependent harvesting was achieved. In addition to efficient flocculation performance, biomass harvested using α-PLL showed suppressed biological contamination through the inherent antimicrobial activity of α-PLL. Thus, it is possible to upgrade the quality and storability of produced microalgal biomass using α-PLL-induced flocculation.

Feasibility of using a microalgal-bacterial consortium for treatment of toxic coke wastewater with concomitant production of microbial lipids.

This study examined the feasibility of using an algal-bacterial process for removal of phenol and NH4+-N from differently diluted coke wastewater with simultaneous production of biomass. Under illumination, microalgal-bacterial (MSB) cultures performed complete phenol degradation at all dilutions of coke wastewater while sole microalgal culture (MSA) degraded a maximum of 27.3% of phenol (initial concentration: 24.0mgL-1) from 5-fold diluted wastewater. Furthermore, the MSB culture had the highest rate of NH4+-N removal (8.3mgL-1d-1) and fatty acid production (20mgL-1d-1) which were 2.3- and 1.5-fold higher than those observed in the MSA cultures, probably due to decreases in toxic organic pollutants. Multivariate analyses indicated that co-cultivation of activated sludge was directly correlated with the elevated removals of phenol and NH4+-N. In the presence of sludge, adequate dilution of the coke wastewater can maximize the effect of bacteria on NH4+-N removal and biomass production.

Evaluation of various harvesting methods for high-density microalgae, Aurantiochytrium sp. KRS101.

Five technologies, coagulation, electro-flotation (EF), electro-coagulation-flotation (ECF), centrifugation, and membrane filtration, were systematically assessed for their adequacy of harvesting Aurantiochytrium sp. KRS101, a heterotrophic microalgal species that has much higher biomass concentration than photoautotrophic species. Coagulation, EF, and ECF were found to have limited efficiency. Centrifugation was overly powerful to susceptible cells like Aurantiochytrium sp. KRS101, inducing cell rupture and consequently biomass loss of over 13%. Membrane filtration, in particular equipped with an anti-fouling turbulence generator, turned out to be best suited: nearly 100% of harvesting efficiency and low water content in harvested biomass were achieved. With rotation rate increased, high permeate fluxes could be attained even with extremely concentrated biomass: e.g., 219.0 and 135.0 L/m(2)/h at 150.0 and 203.0 g/L, respectively. Dynamic filtration appears to be indeed a suitable means especially to obtain highly concentrated biomass that have no need of dewatering and can be directly processed.

A comprehensive study on algal-bacterial communities shift during thiocyanate degradation in a microalga-mediated process.

Changes in algal and bacterial communities during thiocyanate (SCN(-)) decomposition in a microalga-mediated process were studied. Pyrosequencing indicated that Thiobacillus bacteria and Micractinium algae predominated during SCN(-) hydrolysis, even after its complete degradation. Principal components analysis and evenness profiles (based on the Pareto-Lorenz curve) suggested that the changes in the bacterial communities were driven by nitrogen and sulfur oxidation, pH changes, and photoautotrophic conditions. The populations of predominant microalgae remained relatively stable during SCN(-) hydrolysis, but the proportion of bacteria - especially nitrifying bacteria - fluctuated. Thus, the initial microalgal population may be crucial in determining which microorganisms dominate when the preferred nitrogen source becomes limited. The results also demonstrated that microalgae and SCN(-)-hydrolyzing bacteria can coexist, that microalgae can be effectively used with these bacteria to completely treat SCN(-), and that the structure of the algal-bacterial community is more stable than the community of nitrifying bacteria alone during SCN(-) degradation.

Advanced treatment of residual nitrogen from biologically treated coke effluent by a microalga-mediated process using volatile fatty acids (VFAs) under stepwise mixotrophic conditions.

This work describes the development of a microalga-mediated process for simultaneous removal of residual ammonium nitrogen (NH4(+)-N) and production of lipids from biologically treated coke effluent. Four species of green algae were tested using a sequential mixotrophic process. In the first phase-CO2-supplied mixotrophic condition-all microalgae assimilated NH4(+)-N with no evident inhibition. In second phase-volatile fatty acids (VFAs)-supplied mixotrophic condition-removal rates of NH4(+)-N and biomass significantly increased. Among the microalgae used, Arctic Chlorella sp. ArM0029B had the highest rate of NH4(+)-N removal (0.97 mg/L/h) and fatty acid production (24.9 mg/L/d) which were 3.6- and 2.1-fold higher than those observed under the CO2-supplied mixotrophic condition. Redundancy analysis (RDA) indicated that acetate and butyrate were decisive factors for increasing NH4(+)-N removal and fatty acid production. These results demonstrate that microalgae can be used in a sequential process for treatment of residual nitrogen after initial treatment of activated sludge.

Simultaneous treatment of food-waste recycling wastewater and cultivation of Tetraselmis suecica for biodiesel production.

There is an increasing interest in the use of cultivated microalgae to simultaneously produce biodiesel and remove nutrients from various wastewaters. For this purpose, Tetraselmis suecica was cultivated in flasks and fermenters using diluted food-waste recycling wastewater (FRW). The effect of FRW dilution on T. suecica growth and nutrient removal was initially tested in flasks. The maximal microalgal concentration after 14 days was in medium with a twofold dilution (28.3 × 10(6) cells/mL) and a fivefold dilution (25.5 × 10(6) cells/mL). When fivefold diluted medium was used in fermenters, the final dry cell weight of T. suecica was 2.0 g/L. The removal efficiencies of ammonium and phosphate in the fermenters were 99.0 and 52.3%, respectively. In comparison with the results of previous studies, the growth data of T. suecica in the FRW medium indicate that microalgal cultivation system incorporating removal of nutrients in FRW is feasible at the field level.

Algal-bacterial process for the simultaneous detoxification of thiocyanate-containing wastewater and maximized lipid production under photoautotrophic/photoheterotrophic conditions.

In this work, a cooperative algal-bacterial system that efficiently degrades thiocyanate (SCN(-)), a toxic contaminant, and exhibits high lipid productivity, was developed. A consortium of mixed bacteria (activated sludge) and microalgae was sequentially cultivated under photoautotrophic and photoheterotrophic modes. The hydrolysis of SCN(-) to ammonium (NH4(+))-nitrogen and subsequent nitrification steps were performed by the initial activated sludge under lithoautotrophic conditions. The NH4(+) and oxidized forms of nitrogen, nitrite (NO2(-)) and nitrate (NO3(-)), were then assimilated and removed by the microalgal cells when light was supplied. After the degradation of SCN(-), the cultivation mode was changed to photoheterotrophic conditions in a sequential manner. Algal-bacterial cultures containing Chlorella protothecoides and Ettlia sp. yielded significantly increased lipid productivity under photoheterotrophic conditions compared to photoautotrophic conditions (28.7- and 17.3-fold higher, respectively). Statistical methodologies were also used to investigate the effects of volatile fatty acids and yeast extract on biomass and lipid production.

Microalgae-mediated simultaneous treatment of toxic thiocyanate and production of biodiesel.

In this work, a method for simultaneously degrading the toxic pollutant, thiocyanate, and producing microalgal lipids using mixed microbial communities was developed. Aerobic activated sludge was used as the seed culture and thiocyanate was used as the sole nitrogen source. Two cultivation methods were sequentially employed: a lithoautotrophic mode and a photoautotrophic mode. Thiocyanate hydrolysis and a nitrification was found to occur under the first (lithoautotrophic) condition, while the oxidized forms of nitrogen were assimilated by the photoautotrophic consortium and lipids were produced under the second condition. The final culture exhibited good settling efficiency (∼ 70% settling over 10 min), which can benefit downstream processing. The highest CO2 fixation rate and lipid productivity were observed with 2.5% and 5% CO2, respectively. The proposed integrated algal-bacterial system appears to be a feasible and even beneficial option for thiocyanate treatment and production of microbial lipids.