Vertically aligned ZnCdS nanowire arrays/P3HT heterojunctions for solar cell applications.

Nowadays, solid-state inorganic-organic hybrid solar cells based on one-dimensional (1D) inorganic semiconducting nanostructures and organic polymers are believed to offer convincing solutions for the realm of next generation solar cells. In this regard, 1D ZnCdS nanowire (NW) arrays were fabricated on transparent conducting substrates through a catalyst free co-evaporation method and their wurtzite structural characteristics, 1D morphological layout and valence state/composition were studied in detail using X-ray diffraction, high-resolution electron microscopy and X-ray photoelectron spectroscopy, respectively. The existence of deep level traps and optical band gap of ZnCdS NWs were additionally studied using room-temperature cathodoluminescence and UV-vis absorbance measurements. The inorganic-organic hybrid cells were then fabricated using these NWs via spin coating poly(3,4-ethylenedioxythiophene) and poly(styrene sulfonate) based polymers. The morphological dissemination of the polymer deposits on NWs were also studied individually by electron microscopy. The solar cell (J-V) characteristics of the fabricated architectures were investigated at room-temperature and as a function of temperature and different intensities of incident light irradiation. The trap energy of the devices was noted to decrease from 68.1 to 40.7eV, suggesting the active role of trap sites that could have originated from the surface defects and other structural disorders across the hybrid heterostructures.

Single ZnO nanocactus gas sensor formed by etching of ZnO nanorod.

Etching of materials on the nanoscale is a challenging but necessary process in nanomaterials science. Gas sensing using a single ZnO nanocactus (NC), which was prepared by facile isotropic nanoetching of zinc oxide nanorods (NR) grown by chemical vapor deposition (CVD) using an organic photoresist (PR) by a thermochemical reaction, is reported in this work. PR consists of carboxylic acid groups (COOH) and cyclopentanone (C5H8O), which can react with zinc and oxygen atoms, respectively, on the surface of a ZnO NR. The thermochemical reaction is controllable by varying the concentration of PR and reaction time. A gas sensor was fabricated using a single NC. Gas sensing was tested using different gases such as CH4, NH3 and carbon monoxide (CO). It was estimated that the surface area of a ZnO NC in the case of 50% PR was found to increase four-fold. When compared with a single ZnO NR gas sensor, the sensitivity of a ZnO NC was found to increase four-fold. This increase in sensitivity is attributed to the increase in surface area of the ZnO NC. The formed single ZnO NC gas sensor has good stability, response and recovery time.