Fatigue performance of endodontically treated molars reinforced with different fiber systems.

OBJECTIVE: The aim was to investigate the fatigue performance of root canal-treated (RCT) molars restored with different direct restorations utilizing discontinuous and continuous fiber-reinforced composite (FRC) systems. The impact of direct cuspal coverage was also evaluated. MATERIALS AND METHODS: One hundred and twenty intact third molars extracted for periodontal or orthodontic reasons were randomly divided into six groups (n=20). Standardized MOD, regular cavities for direct restorations were prepared in all specimens, and subsequently, root canal treatment and root canal obturation was carried out. After the endodontic treatment, the cavities were restored with different fiber-reinforced direct restorations as follows: SFC group (control), discontinuous short fiber-reinforced composite (SFC) without cuspal coverage (CC); SFC+CC group, SFC with cuspal coverage; PFRC group, transcoronal fixation with continuous polyethylene fibers without CC; PFRC+CC group, transcoronal fixation with continuous polyethylene fibers with CC; GFRC group, continuous glass FRC post without CC; and GFRC+CC, continuous glass FRC post with CC. All specimens underwent a fatigue survival test in a cyclic loading machine until fracture occurred or 40,000 cycles were completed. The Kaplan-Meier survival analysis was conducted, followed by pairwise log-rank post hoc comparisons between the individual groups (Mantel-Cox). RESULTS: The PFRC+CC group was characterized by significantly higher survival compared to all the groups (p < 0.05), except for the control group (p = 0.317). In contrast, the GFRC group showed significantly lower survival compared to all the groups (p < 0.05), except for the SFC+CC group (p = 0.118). The control group (SFC) showed statistically higher survival than the SFRC+CC group (p < 0.05) and GFRC group (p < 0.05), but it did not differ significantly from the rest of the groups in terms of survival. CONCLUSIONS: Direct restorations utilizing continuous FRC systems (in the form of polyethylene fibers or FRC post) to restore RCT molar MOD cavities performed better in terms of fatigue resistance when CC was performed compared to the same FRC restorations without CC. On the contrary, teeth restored with SFC restorations performed better without CC compared to the ones where SFC was covered. CLINICAL RELEVANCE: In the case of fiber-reinforced direct restorations for MOD cavities in RCT molars, direct CC is recommended when utilizing long continuous fibers for reinforcement, however, should be avoided when only SFC is used for their reinforcement.

Crack propensity of different direct restorative procedures in deep MOD cavities.

OBJECTIVE: The purpose was to evaluate the crack formation associated with different direct restorative procedures of the utilized resin composites (RC) right after and 1 week later of the restoration. MATERIALS AND METHODS: Eighty intact, crack-free third molars with standard MOD cavities were included in this in vitro study and randomly divided into four groups of 20 each. After adhesive treatment, the cavities were restored either with bulk (group 1) or layered (group 2) short-fiber-reinforced resin composites (SFRC); bulk-fill RC (group 3); and layered conventional RC (control). Right after the polymerization and a week later, crack evaluation on the outer surface of the remaining cavity walls was performed with a transillumination method utilizing the D-Light Pro (GC Europe) with the "detection mode." Between- and within-groups comparisons Kruskal-Wallis and Wilcoxon tests were used, respectively. RESULTS: Post-polymerization crack evaluation showed significantly lower crack formation in SFRC groups compared to the control (p<0.001). There was no significant difference within SFRC groups and non-SFRC groups (p=1.00 and p=0.11, respectively). Within group comparison revealed significantly higher number of cracks in all groups after 1 week (p≤0.001), however, only the control group differed significantly from all the other groups (p≤0.003). CONCLUSIONS: Post-polymerization shrinkage induced further crack formation in the tooth 1 week after the restoration. SFRC was less prone to shrinkage-related crack formation during the restorative procedure; however, after 1 week, besides SFRC, bulk-fill RC also showed less prone to polymerization shrinkage-related crack formation than layered composite fillings. CLINICAL RELEVANCE: SRFC can decrease the shrinkage stress-induced crack formation in MOD cavities.

Fracture Resistance and Microleakage around Direct Restorations in High C-Factor Cavities.

The aim of this research was to evaluate the mechanical impact of different direct restorations in terms of fracture resistance, and subsequent fracture pattern, in occlusal high C-factor cavities. Furthermore, the adaptation of different direct restorations in the form of gap formation was also evaluated. Seventy-two intact mandibular molars were collected and randomly distributed into three groups (n = 24). Class I occlusal cavities with standardized dimensions were prepared in all specimens. After adhesive treatment, the cavities were restored with direct restorations utilizing three different materials. Group 1: layered conventional packable resin composite (Filtek Ultimate), Group 2: bulk-fill resin composite (SDR), Group 3: bulk-fill short fibre-reinforced composite (SFRC; everX Posterior) covered with packable composite occlusally. Half of the restored specimens underwent static load-to fracture testing (n = 12/group), while the rest underwent sectioning and staining for microleakage evaluation and gap formation analysis. Fracture patterns were evaluated visually among the mechanically tested specimens. The layered composite restoration (Group 1) showed significantly lower fracture resistance compared to the bulk fill groups (Group 2, p = 0.005, Group 3, p = 0.008), while there was no difference in fracture resistance between the other groups. In terms of gap formation values, the layered composite restoration (Group 1) produced significantly higher gap formation compared to the bulk-fill groups (Group 2, p = 0.000, Group 3, p = 0.000). Regarding the fracture pattern, SFRC (Group 3) produced the highest number, while SDR (Group 2) produced the lowest number of repairable fractures. The use of bulk-fill resin composite (fibre or non-fibre-reinforced) for occlusal direct restorations in high C-factor cavities showed promising achievements regarding both fracture resistance and microleakage. Furthermore, the use of short fibre-reinforced bulk-fill composite can also improve the fracture pattern of the restoration-tooth unit. Bulk-fill materials provide a simple and effective solution for restoring and reinforcing high C-factor occlusal cavities.

Mechanical Performance of Direct Restorative Techniques Utilizing Long Fibers for "Horizontal Splinting" to Reinforce Deep MOD Cavities-An Updated Literature Review.

Excessive cavity preparation and root canal treatment leads to a weakened tooth structure with a lower resistance to fracture. Fiber reinforcement is frequently used to reinforce such teeth, and multiple fiber types and possible applications exist. Various methods for utilizing long fibers to internally splint the remaining cavity walls in the case of large mesio-occluso-distal (MOD) cavities have been proposed; however, no summary of their performance has been written up to now. Our study aims to review the available literature to evaluate and compare the mechanical performance of the different materials and methods utilized for horizontal splinting in large MOD cavities. Three independent authors performed a thorough literature search using PubMed, ScienceDirect, and Google Scholar up until January 2022. The authors selected in vitro studies that used long fibers placed horizontally in posterior teeth with large MOD cavities to reinforce these teeth. From 1683 potentially relevant articles, 11 publications met our inclusion criteria. Seven out of eleven studies showed that horizontal splinting with long fibers improved the fracture resistance of the restored teeth. Three articles showed no significant difference between the fracture resistance of the restored groups. Only one article reported a lower fracture resistance to the horizontally splinted group, compared to conventional direct composite restoration. Within the limitations of this review, evidence suggests that long fiber reinforcement could be used to improve the fracture resistance of heavily restored teeth.

Fatigue performance of endodontically treated molars restored with different dentin replacement materials.

OBJECTIVES: The aim was to investigate the fatigue performance of endodontically treated (ET) molars restored by various dentin-replacing materials and material configurations. Moreover, the impact of additional adhesive treatment with glass-ionomer cement (GIC) was evaluated. METHODS: 250 intact molars were collected and randomly distributed into ten groups (n = 25). After endodontic procedure standard Class I cavities were prepared and restored with different direct restorative techniques and dentin-replacing materials. Two-group were restored with either packable or flowable short fiber-reinforced composites (SFRCs). Two-group were restored by experimental fiber-reinforced GIC with and without adhesive treatment. Four-group were restored by conventional and resin-modified GICs with or without adhesive treatment. One-group was restored with a dual-cure composite resin and last group was restored with only conventional composite resin (control). Fatigue-survival was measured for all specimens using a cyclic-loading machine until fracture occurred or a number of 40.000 cycles were achieved. Kaplan-Meyer survival analysis was conducted, followed by pairwise log-rank post hoc comparisons. Fracture mode was then examined by means of optical microscopy and SEM. RESULTS: Group restored with flowable SFRC showed significantly higher survival (p < 0.05) compared to all of the groups, except for group restored with packable SFRC (p > 0.05). Group restored with fiber-reinforced GIC had significantly (p < 0.05) higher survival rates compared to other commercial GICs. SEM demonstrated change of the fracture line when fracture reached the SFRC layer. SIGNIFICANCE: Direct restoration of Class I in ET molars with the use of SFRCs as dentin-replacing materials demonstrated its ability to reinforce the dental structures and to increase the fatigue resistance in this specific clinical situation.

Fatigue performance of endodontically treated premolars restored with direct and indirect cuspal coverage restorations utilizing fiber-reinforced cores.

OBJECTIVES: The aim of this in vitro study was to investigate the fatigue survival and fracture behavior of endodontically treated (ET) premolars restored with different types of post-core and cuspal coverage restorations. MATERIALS AND METHODS: MOD cavities were prepared on 108 extracted maxillary premolars. During the endodontic treatment, all teeth were instrumented with rotary files (ProTaper Universal) to the same apical enlargement (F2) and were obturated with a matched single cone obturation. After the endodontic procedure, the cavities were restored with different post-core and overlay restorations (n = 12/group). Three groups (A1-A3) were restored with either conventional composite core (PFC; control) or flowable short-fiber-reinforced composite (SFRC) core with/without custom-made fiber posts and without overlays. Six groups had similar post-core foundations as described above but with either direct PFC (B1-B3) or indirect CAD/CAM (C1-C3) overlays. Fatigue survival was tested for all restorations using a cyclic loading machine until fracture occurred or 50,000 cycles were completed. Kaplan-Meyer survival analysis was conducted, followed by pairwise post hoc comparisons. RESULTS: None of the restored teeth survived all 50,000. Application of flowable SFRC as luting-core material with fiber post and CAD/CAD overlays (Group C3) showed superior performance regarding fatigue survival (p < 0.05) to all the other groups. Flowable SFRC with fiber post and direct overlay (Group B3) showed superior survival compared to all other direct techniques (p < 0.05), except for the same post-core foundation but without cuspal coverage (Group A3). CONCLUSIONS: Custom-made fiber post and SFRC as post luting core material with or without cuspal coverage performed well in terms of fatigue resistance and survival when used for the restoration of ET premolars. CLINICAL RELEVANCE: The fatigue survival of direct and indirect cuspal coverage restorations in ET MOD premolars is highly dependent on whether the core build-up is fiber-reinforced or not. The combination of short and long fibers in the form of individualized post-cores seems to offer a favorable solution in this situation.

Fracture Behavior and Integrity of Different Direct Restorative Materials to Restore Noncarious Cervical Lesions.

The purpose of this study was to analyze the fracture resistance and marginal leakage of noncarious cervical lesion (NCCL) restorations made of different restorative materials. Eighty upper premolars were randomly divided into four groups (n = 20/group). Standardized NCCL cavity preparations were performed on the buccal surface of the teeth and then restored with four different materials. Group 1: Packable resin composite (PC); Group 2: Highly flowable resin composite (HF); Group 3: Low flowable resin composite (LF); Group 4: Resin modified glass ionomer cement (RMGIC). After restorations were completed, cyclic and static fracture behavior was evaluated using a loading testing machine. Extra restored teeth were sectioned and then stained (n = 5/group). The specimens were viewed under a stereo microscope and the percentage of microgaps at the tooth-restoration interface was calculated. All restored teeth survived after fatigue loading. There was no statistically significant (p > 0.05) difference between the tested restorations after the static loading test. NCCLs restored with highly filled flowable composite showed the least microleakage among the tested groups (p < 0.05). The investigated restorative materials are acceptable for NCCL restorations in terms of fracture resistance and microleakage.

Fracture Behavior of Short Fiber-Reinforced Direct Restorations in Large MOD Cavities.

The aim of this research was to study the impact of using a short fiber-reinforced composite (SFRC) core on the fatigue performance and fracture behavior of direct large posterior composite restorations. Moreover, the influence of the consistency (flowable or packable) of occlusal composite coverage was assessed. A total of 100 intact molars were collected and randomly distributed into five groups (n = 20). Deep mesio-occlusal-distal (MOD) cavities were prepared in all groups. After adhesive treatment and rebuilding the missing interproximal walls with conventional composite, the specimens in four experimental groups were restored by an SFRC core (everX Flow), which was applied and cured either in bulk or in oblique layers (each 2 mm thick). Packable (G-aenial Posterior) or flowable (G-aenial Injectable) conventional composites were used as a final occlusal layer. The control group was restored with only packable conventional composite. Fatigue survival was measured for all specimens using a cyclic loading machine until a fracture occurred or a total of 25,000 cycles was achieved. Kaplan-Meyer survival analyses were conducted, followed by pairwise log-rank post hoc comparisons. The static load-bearing capacity of surviving teeth was tested using a universal testing machine. Fracture patterns were evaluated visually. There was no statistically significant (p > 0.05) difference in terms of survival between the tested groups. All groups for which flowable SFRC was used showed statistically significantly higher load-bearing capacities compared to the control group (p < 0.05). There were no significant differences regarding fracture resistance among the fiber-reinforced study groups. Regarding the fracture pattern during the survival analysis, all specimens that received SFRC showed a dominantly restorable type of fracture, while the control specimens presented a dominantly non-restorable type. The use of flowable SFRC as a reinforcing core for large MOD direct restorations showed promising achievements regarding fracture behavior.

Fatigue failure of anterior teeth without ferrule restored with individualized fiber-reinforced post-core foundations.

OBJECTIVES: The aim was to explore the survival of extensively damaged anterior teeth without ferrule restored with different fiber-reinforced composite (FRC) post-core foundations and composite crowns. MATERIALS AND METHODS: Sixty extracted upper central incisors were decoronated and randomly divided into four groups (n = 15). After endodontic treatment, the specimens were restored with different individualized fiber-reinforced post-core foundations as follows: control group (CTRL): multiple unidirectional FRC-post + dual-cure composite-core, PFC: multiple unidirectional FRC-post + packable short fiber-reinforced composite (SFRC), BPFC: Bioblock technique with only packable SFRC, BFFC: Bioblock technique with only flowable SFRC. After core build-up, the teeth were finalized with adhesively luted CAD/CAM composite crowns. Cyclic isometric loading (5 Hz) was applied at 100 N for 5000 cycles, and then 200 N and 300 N for 15,000 cycles each in a fluid chamber. The specimens were loaded until fracture occurred or when a total of 35,000 cycles were reached. Kaplan-Meyer survival analysis was conducted, followed by pairwise log-rank post hoc comparisons (Mantel-Cox). RESULTS: The survival rates of the control (8279 cycles) and PFC (6161 cycles) were significantly higher compared to BPFC (3223 cycles) and BFFC (2271 cycles) (p < 0.05). Regarding fracture pattern, nearly all specimens fractured in a restorable manner. CONCLUSIONS: For restoring extensively damaged anterior teeth, multiple unidirectional FRC posts are recommended. CLINICAL RELEVANCE: Although different FRC post/core systems are available for the restoration of damaged root canal treated anterior teeth, multiple unidirectional FRC posts tend to be a good option when the ferrule is missing.

Fatigue behavior of endodontically treated premolars restored with different fiber-reinforced designs.

OBJECTIVES: The aim was to investigate the fatigue survival and marginal-gap inside the root-canal of endodontically treated (ET) premolars reinforced by various fiber-reinforced post-core composites (FRCs). Moreover, composite-curing at different depths in the canal was evaluated. METHODS: 170 intact upper-premolars were collected and randomly divided into ten groups (n = 15). One group served as control (intact-teeth). After endodontic procedure standard MO cavities were prepared and restored with different post-core fiber-reinforced materials and designs. Three-group (A1-A3) were restored with either packable and flowable short fiber-reinforced composite (SFRC) core or conventional composite-core. Two-group (B1-B2) were restored with SFRCs as short post (3 mm) and core. Four-group (C1-C4) were restored with SFRCs as post (6 mm) and core with or without unidirectional FRC posts (individually-made or conventional). After completing the restorations, teeth from Group C1-C4 (n = 5/group) were sectioned and stained. Specimens were viewed under a stereo-microscope and the percentage of microgaps within the root-canal was calculated. Fatigue-survival was measured using a cyclic-loading machine in the rest of the specimens. RESULTS: Application of flowable SFRC as luting-core material with individually-made FRC post (Group C3) did not differ from intact-teeth regarding fatigue-survival (p > 0.05). The rest of the groups produced significantly lower survival (p < 0.05) compared to intact-teeth. Post/core restorations made from packable SFRC (Group C1) had a lower microgap (19.1%) at the examined interphase in the root-canal than other groups. SIGNIFICANCE: The restoration of ET premolars with the use of individually-made FRC post and SFRC as luting-core material showed promising achievement regarding fatigue-resistance and survival.

Fatigue failure load of immature anterior teeth: influence of different fiber post-core systems.

The aim was to explore the fracture-behavior, survival and marginal-microgaps within the root-canal of immature anterior teeth restored with different fiber-reinforced post-core composites (FRCs). 180 bovine-incisors were randomly divided into 6 groups (n = 30). One group served as control (group 6). The rest of the teeth were prepared to an internal diameter of 1.6 mm and the apex was sectioned. After application of an MTA-plug, teeth were restored with FRC materials: Group 1: Bioblock technique with short fiber-reinforced composite (SFRC); Group 2: Bioblock technique with flowable SFRC; Group 3: Individually-made FRC post; Group 4: Conventional FRC post; Group 5: dual-cure core build-up composite. After restorations were completed, teeth (n = 5/group) were sectioned and then stained. Specimens were viewed under a stereo microscope and the percentage of microgaps within the root-canal was calculated. Fatigue-survival was measured using a cyclic-loading testing machine in the rest of the specimens. Flowable SFRC application in the root-canal (Group 2) did not differ from intact-teeth regarding fatigue-survival (p > 0.05). The rest of the groups produced significantly lower survival (p < 0.05) compared to intact-teeth. Post/core restorations made from conventional FRC post (Group 4) exhibited a high number of microgaps (38.3%) at the examined interphase in the root-canal. The restoration of immature incisors with the use of flowable SFRC as post-core material displayed promising performance in a matter of fatigue-resistance and survival.

Bioblock technique to treat severe internal resorption with subsequent periapical pathology: a case report.

A variety of therapeutic modalities can be used for the endodontic treatment of a traumatized tooth with internal root resorption (IRR). The authors present a case report of the successful restoration of a traumatized upper central incisor that was weakened due to severe IRR and subsequent periapical lesion formation. A 20-year-old female patient was referred to our clinic with severe internal resorption and subsequent periapical pathosis destroying the buccal bone wall. Root canal treatment had been initiated previously at another dental practice, but at that time, the patient's condition could not be managed even with several treatments. After cone-beam computed tomography imaging and proper chemomechanical cleaning, the tooth was managed with a mineral trioxide aggregate plug followed by root canal filling using short fiber-reinforced composite, known as the Bioblock technique. This report is the first documentation of the use of the Bioblock technique in the restoration of a traumatized tooth. The Bioblock technique appears to be ideal for restoring wide irregular root canals, as in cases of severe internal resorption, because it can uniquely fill out the hollow irregularities of the canal. However, further long-term clinical investigations are required to provide additional information about this new technique.

Fracture behaviour of MOD restorations reinforced by various fibre-reinforced techniques - An in vitro study.

PURPOSE: The aim was to evaluate the fracture resistance of various direct restorative techniques utilizing different fibre-reinforced materials for restoring deep class II. MOD cavities in molar teeth. MATERIAL AND METHODS: Two hundred forty intact mandibular third molars were randomly divided into twelve groups (n = 20). Except for the control group (G12), deep mesio-occluso-distal (MOD) cavities were prepared all other groups. After adhesive treatment and rebuilding the missing interproximal walls with composite, the specimen were restored with different fibres and a final occlusal layer of composite as follows: composite only (G1), short fibre-reinforced composite (SFRC) (G2), glass fibre net (GFN) on the base of the cavity bucco-lingually (BL) and SFRC (G3), SFRC and GFN on top of it BL (G4), SFRC and occlusal splinting with GFN (G5), GFN circumferentially and SFRC (G6), polyethylene fibres (PF) on the base of the cavity BL and composite (G7), composite and PF on top of it BL (G8), composite and occlusal splinting with PF (G9), PF circumferentially and composite (G10), transcoronal splinting with PF (G11). Fracture-resistance for the restored teeth were tested using universal-testing machine. Fracture thresholds and fracture patterns were measured and evaluated. RESULTS: The transcoronal splinting (G11) yielded the highest fracture resistance among the restored groups. Groups 1, 3 and 4 showed significantly lower fracture resistance values compared to intact teeth. CONCLUSION: Incorporating polyethylene or a combination of short and bidirectional glass fibres in certain positions in direct restorations seems to be able to restore the fracture resistance of sound molar teeth.