Signal amplification of a quartz crystal microbalance immunosensor by gold nanoparticles-polyethyleneimine for hepatitis B biomarker detection.

The procedures currently used for hepatitis B (HB) detection are not suitable for screening, clinical diagnosis, and point-of-care testing (POCT). Therefore, we developed and tested a QCM-based immunosensor by surface modification with AuNP-PEIs to amplify the signal and provide an oriented-immobilization surface. The AuNP-PEIs were characterized by ICP-Mass, UV/Vis, DLS, FE-SEM, and ATR-FTIR. After coating AuNP-PEIs on the gold electrode surface, anti-HBsAg antibodies were immobilized using NHS/EDC chemistry based on response surface methodology (RSM) optimization. The efficiency of the immunosensor was assessed by human sera and data were compared to gold-standard ELISA using receiver-operating-characteristic (ROC) analysis. FE-SEM, AFM, EDS, and EDS mapping confirmed AuNP-PEIs are homogeneously distributed on the surface with a high density and purity. After antibody immobilization, the immunosensor exhibited good recognition of HBsAg with a calibration curve of ∆F = - 6.910e-7x + 10(R2 = 0.9905), a LOD of 1.49 ng/mL, and a LOQ of 4.52 ng/mL. The immunosensor yielded reliable and accurate results with a specificity of 100% (95% CI 47.8-100.0) and sensitivity of 100% (95% CI 96.2-100.0). In conclusion, the fabricated immunosensor has the potential as an analytic tool with high sensitivity and specificity. However, further investigations are needed to convert it to a tiny lab-on-chip for HB diagnosis in clinical samples.

A quartz crystal microbalance biosensor based on polyethylenimine-modified gold electrode to detect hepatitis B biomarker.

Biomarkers-based QCM-biosensors are suitable tools for the label-free detection of infectious diseases. In the current study, a QCM-biosensor was developed for the detection of HBsAg. Briefly, anti-HBsAg antibodies were covalently bound to the primary amines after PEI and thiolated-PEI surface modifications of gold-electrode. After RSM optimization, the statistical analysis revealed no significant difference between the immobilization yields of modified layers. Therefore, the PEI-modified QCM-biosensor was selected for further analysis. The PEI-surface was evaluated by FESEM, AFM, ATR-FTIR, and CA measurement. The surface hydrophilicity and its roughness were increased after PEI-coating. Also, FTIR confirmed the PEI-layering on the gold-surface. RSM optimization increased the antibody immobilization yield up to 80%. The QCM-biosensor showed noteworthy results with a wide dynamic range of 1-1 × 103 ng/mL, LOD of 3.14 ng/mL, LOQ of 9.52 ng/mL, and detection capability in human-sera, which were comparable with the ELISA. The mean accuracy of the QCM-biosensor was obtained at 91% when measured by the spike recovery test using human-sera. The biosensor was completely regenerated using 50 mM NaOH and 1% SDS. The benefits provided by the developed biosensor such as broad dynamic range, sensitivity, selectivity, stability, regenerate ability, and low cost suggest its potential application for the non-invasive and timely monitoring of HBV-biomarker.

Label-Free Real-Time Detection of HBsAg Using a QCM Immunosensor.

BACKGROUND: Hepatitis B virus surface antigen (HBsAg) is an important protein in both diagnosis and prevention of hepatitis B infection. In the current study, a piezoelectric immunosensor based on antibody-antigen interaction was designed to detect HBsAg. A quartz crystal microbalance system was employed to detect antibody-antigen interaction. METHODS: At first, an oscillator was designed to measure the resonant frequency affected by the reactants using IC 74LVC1GX04. Antibody against HBsAg was immobilized on 10 MHz AT-cut quartz crystal. The surface modifications were monitored by atomic force microscopy (AFM) and contact angle measurements. Different concentrations of antibody were used for surface immobilization and the frequency shifts were assessed. The system stability was studied by evaluating the stability of the crystal and the immobilized antibody. The adsorption of antibody onto the crystal was analyzed using AFM and changes in the resonance frequency. Further, a direct immunoassay was performed with this immobilized antibody to identify HBsAg solutions at different concentrations. Finally, specific and non-specific responses were investigated using hepatitis B (HBsAg) and hepatitis C (HCV Ag) antigens, respectively. RESULTS: Antibodies against HBsAg were successfully immobilized on 10 MHz AT-cut quartz crystal. The stability tests of crystal immobilized with antibody and unimmobilized crystal revealed that both forms of crystals were stable. Theoretical and experimental frequency assays were compared. A decrease in the contact angle indicated the hydrophilicity of surface after modifications. AFM images illustrated a more uniform surface after antibody adsorption and the surface roughness (RMS) reduced from 1.13 to 0.99 nm. Changes in the frequency were detected after the physical adsorption of HBsAb on the designed chip. The standard curve of antigen revealed the frequency changes depend on concentration of antigen. Finally, the specificity test confirmed the specificity of the designed biosensor for the detection of HBsAg from HCV Ag. The quantization of immobilized antibody was characterized by the frequency shift of the QCM. The obtained results were compared with ELISA assay. The correlation coefficients of HBsAg dilution between QCM and ELISA was 0.9821. CONCLUSIONS: This study is a new step to meet the challenges regarding HBsAg detection. Physical adsorption used in this study was effective as the simplest immobilization method to design a QCM-based immunosensor for HBsAg detection. Facilitated, fast, and simple detection of HBsAg by an antibody-based QCM biosensor is our main objective.

In Vitro Assessment of Magnetic Liposomal Paclitaxel Nanoparticles as a Potential Carrier for the Treatment of Ovarian Cancer.

Purpose: This study aimed to evaluate the role of magnetic liposome nanoparticles (ML NPs) as a carrier for paclitaxel (PTX) for the treatment of ovarian cancer in vitro. Methods: Magnetic NPs (MNPs) were synthesized by chemical co-precipitation method. The resulting NPs were characterized in terms of size, size distribution, zeta potential, drug encapsulation efficiency (EE), drug release pattern, and cytotoxicity effects. Results: The size and zeta potential of PTX-PEG-L and PTX-PEG-ML NPs were determined to be 296, 198 nm; -20, and -19 mV, respectively. Also, their drug encapsulation efficiencies were determined to be 97% and 96%, respectively. It was found that PTX-PEG-ML NPs, compared to PTX-PEG-L NPs, caused a reduction (11%) in the rate of drug release. The cytotoxicity of the drug-loaded NPs was assessed using 3-[4,5-dimethylthiazole-2-yl]-2,5-diphenyltetrazolium bromide (MTT) assay against human ovarian epithelial cancer (A2780CP) cells, and the results demonstrated that PTX-PEG-ML NPs caused higher cytotoxicity (by 14%) compared to PTX-PEG-L NPs (IC50: 1.88 ± 0.09 and 2.142 ± 0.1 µM, respectively). Conclusion: Overall, the results of this study suggest that PTX-PEG-ML NPs could be considered as a therapeutic candidate for the treatment of ovarian cancer.

Preparation, Characterization and Cytotoxicity of Silibinin- Containing Nanoniosomes in T47D Human Breast Carcinoma Cells.

BACKGROUND: Breast cancer is one of the most frequent cancer types within female populations. Silibinin is a chemotherapeutic agent active against cancer. Niosomes are biodegradable, biocompatible, safe and effective carriers for drug delivery. OBJECTIVE: To prepare nanoniosomal silibinin and evaluate its cytotoxicity in the T-47D breast cancer cell line. MATERIALS AND METHODS: Niosomes were prepared by reverse phase evaporation of a mixture of span 20, silibinin, PEG-2000 and cholesterol in chloroform and methanol solvent (1:2 v/v). The solvent phase was evaporated using a rotary evaporator and the remaining gel phase was hydrated in phosphate buffer saline. Mean size, size distribution and zeta potential of niosomes were measured with a Zetasizer instrument and then nanoparticles underwent scanning electron microscopy. The drug releasing pattern was evaluated by dialysis and the cytotoxicity of nanoniosomes in T-47D cells was assessed by MTT assay. RESULTS: Particle size, size variation and zeta potential of the niosomal nanoparticles were measured as 178.4 ± 5.4 nm, 0.38 ± 0.09 and -15.3 ± 1.3 mV, respectively. The amount of encapsulated drug and the level of drug loading were determined 98.6 ± 2.7% and 22.3 ±1.8%, respectively; released drug was estimated about 18.6±2.5% after 37 hours. The cytotoxic effects of nanoniosome were significantly increased when compared with the free drug. CONCLUSIONS: This study findings suggest that silibinin nanoniosomes could serve as a new drug formulation for breast cancer therapy.

Efficacy of pegylated liposomal etoposide nanoparticles on breast cancer cell lines.

BACKGROUND/AIM: This study aimed to investigate the efficacy of pegylated liposomal etoposide nanoparticles (NPs) against T-47D and MCF-7 breast cancer cell lines. MATERIALS AND METHODS: Pegylated liposomal etoposide NPs were prepared by reverse phase evaporation method. The size, size distribution, and zeta potential of the NPs was measured by a Zetasizer instrument. The cytotoxicity of NPs was inspected by methyl thiazol tetrazolium assay. The release pattern of the drug from the vesicles was studied by the dialysis method. Drug loading and encapsulation efficiency (EE) were also measured. RESULTS: The mean size, size distribution, and zeta potential of pegylated liposomal etoposide NPs were 491 ± 15.5 nm, 0.504 ± 0.14, and -35.8 ± 2.5 mV, respectively. Drug loading and EE were 10.3 ± 1.6% and 99.1 ± 2.8%, respectively. The etoposide release in the formulation was estimated at about 3.48% after 48 h. The cytotoxicity effect of etoposide NPs on T-47D and MCF-7 cell lines of breast cancer showed higher antitumor activity as compared with those of the free drug. CONCLUSION: Liposome-based NPs may hold great potential as a drug delivery system.

Preparation, characterization, and cytotoxic effects of liposomal nanoparticles containing cisplatin: an in vitro study.

Cisplatin is a chemotherapeutic agent used for treating various malignancies. The study aimed to prepare pegylated liposomal cisplatin and evaluate its efficacy against human breast cancer cell line MCF-7. Drug-loaded nanoparticles were synthesized by reverse phase evaporation technique. The study is highlighted by extensive characterization of nanoparticles in terms of nanoparticle morphology, type of drug entrapment, cisplatin retention capability, and cytotoxicity effects. The size, size distribution, and zeta potential of nanodrug were estimated 142 nm, 0.33, and -22 mV, respectively. Drug-loading efficiency was equal to 48% that occurred physically. Furthermore, high retention capability (39% of drug was released after 72 h) with significantly enhanced cytotoxicity of nanodrug (1.75 times more than the standard drug) confirmed the potency of liposomal nanoparticles as proper cisplatin carrier.

Kinetics of alkaline protease production by Streptomyces griseoflavus PTCC1130.

BACKGROUND AND OBJECTIVES: Proteases are a group of enzymes that catalyze the degradation of proteins resulting in the production of their amino acid constituents. They are the most important group of industrial enzymes which account for about 60% of total enzymes in the market and produced mainly by microorganisms. The attempts were made to study the kinetic parameters of protease produced by Streptomyces griseoflavus PTCC1130. MATERIALS AND METHODS: Streptomyces griseoflavus PTCC1130 was grown on casein agar. Different media such as BM1, BM2, BM3 and BM4 were prepared. Data obtained from growth and protease production were subjected to kinetics evaluation. Casein was used as substrate for protease activity and the released soluble peptide bearing aromatic amino acid were quantified by Folin Cioclateaue reagent. Protein content of the enzyme and the sugar utilized by the organism were estimated by Bradford and Miller's methods respectively. RESULTS: Basal Medium named as BM1, BM2, BM3 and BM4(50 mL in 250 mL Erlen Meyer flasks) were screened out to evaluate protease production by Streptomyces griseoflavus PTCC1130. They were inoculated with known amount of seed culture and kept on rotary shaker. To obtain the specific growth rate, wet weight of biomass was plotted against the time. The clarified supernatant was used for the analysis of protease by measuring the soluble peptide containing aromatic amino acid residues employing Folin Cioclateaue reagent. Our results showed that maximum level of enzyme production (14035 U/L) was occurred at late exponential phase using Basal Medium supplemented with zinc sulfate (0.5g/L), casein (10g/L) at pH 6.5. CONCLUSIONS: A kinetic study of protease production by Streptomyces griseoflavus PTCC1130 provided highly quantitative information regarding the behavior of a system, which is essential to study the fermentation process. Exploitation of such kinetics analysis would be useful in commercialization of microbial enzyme production.

Cytotoxicity and Apoptosis Inducing Activities of 2-Amino-4H-chromene-3-carbonitrile Derivatives Loaded on Gold Nanoparticles Against Human Breast Cancer Cell Line T47D.

Chemotherapy drugs, used for prevention of uncontrolled cell proliferation in certain tissues as well as inducing apoptosis in tumor cells, are important candidates for treatment of cancer. The synthesized 2-amino-4H-chromene-3-carbonitrile derivatives effective on cancerous cells resistant to other drugs such as Paclitaxel were used due to their ability in induction of apoptosis. The growth inhibitory and inducing apoptosis activities were determined. In order to make it target-oriented, the best compound was conjugated with gold nanoparticles (NPs) by aspartic acid with chemical reduction method. Cytotoxicity effect of 2-amino-4H-chromene-3-carbonitrile derivatives against the T47D breast cancer cell line was determined by MTT assay. The synthesis of gold NPs was confirmed by transmission electron microscopy, UV-Vis and dynamic light scattering. To assess the effects of compounds on the process of apoptosis, staining methods with acridine orange-ethidium bromide and Hoechst staining by fluorescence microscopy and DNA fragmentation by the diphenylamine method were used. The synthesized compounds containing two NH2 groups on benzene rings, demonstrated more cytotoxicity effect. The effect of conjugation with gold NPs and the induction of apoptosis were studied with the best compound. The cytotoxicity effects of the synthesized 2-amino-4H-chromene-3-carbonitrile compounds were changed by replacement of NO2 group on thiol ring with different chemical groups on the benzene ring. Analyses of treated cell lines by conjugated and non-conjugated forms of compounds verified their ability in inducing apoptosis while conjugated form demonstrated higher apoptosis.

Immunoisolated transplantation of purified langerhans islet cells in testis cortex of male rats for treatment of streptozotocin induced diabetes mellitus.

The objective of this study is to induce experimental diabetes mellitus by streptozotocin in normal adult Wistar rats via comparison of changes in body weight, consumption of food, volume of water, urine and levels of glucose, insulin and C-peptide in serum, between normal and diabetic rats. Intra-venous injection of 60 mg/kg dose of streptozotocin in 250-300 g (75-90 days) adult Wistar rats makes pancreas swell and causes degeneration in Langerhans islet ß-cells and induces experimental diabetes mellitus in 2-4 days. For a microscopic study of degeneration of Langerhans islet ß-cells of diabetic rats, biopsy from pancreas tissue of diabetic and normal rats, staining and comparison between them, were done. In this process, after collagenase digestion of pancreas, islets were isolated, dissociated and identified by dithizone method and then with enzymatic procedure by DNase and trypsin, the islet cells changed into single cells and ß-cells were identified by immune fluorescence method and then assayed by flow-cytometer. Donor tissue in each step of work was prepared from 38 adult male Wistar rats weighted 250-300 g (75-90 days). Transplantation was performed in rats after 2-4 weeks of diabetes induction. In this study, the levels of insulin, C-peptide and glucose in diabetic rats reached to normal range as compared to un-diabetic rats in 20 days after transplantation of islet cells. Transplantation was performed under the cortex of testis as immunoisolated place for islet cells transplantation.

An investigation into the parameters affecting preparation of polybutyl cyanoacrylate nanoparticles by emulsion polymerization.

Emulsion polymerization was used to synthesize poly butyl cyanoacrylate nanoparticles in presence of steric stabilizer dextran 70. Nanoparticles were characterized by particle size analysis, scanning electron microscopy and light microscopy. Polymerization factors affecting particle size and distribution such as dextran 70, polysorbate 80 (PS 80) and H(+) concentration, polymerization time and temperature, and sonication were studied. Distinct concentrations of stabilizer were needed to produce proper nanoparticles. In this case, the appropriate value was 2 % of total volume. At pH 4 significant decrease in production efficiency demonstrated the substantial effect of H(+) concentration on nanoparticles. Furthermore significant increases in particle size and distribution was observed at 50 °C compared to room temperature. 0.001 % (v/v) PS 80 represented notable influence on size and distribution. In addition, shaped nanoparticles were obtained by altering polymerization time from 5.5 h to 18 h. Finally, nanoparticle features were influenced by different factors. Appropriate manipulating of such factors can lead to obtaining desirable nanoparticles.

In vitro antitumor evaluation of 4H-chromene-3-carbonitrile derivatives as a new series of apoptotic inducers.

Apoptosis is a naturally occurring process by which a cell is directed to programmed cell death. Chemotherapy drugs affect the cancer cells by the apoptotic induction. During the present study, a series of 4H-chromene-3-carbonitrile was synthesized by one-pot method as the inducers of apoptosis. Cytotoxic effects of six compounds of 4H-chromene-3-carbonitrile were evaluated against five tumor cell lines, with the help of colorimetric 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay. Compound 4 showed significant cytotoxic activity and was selected for conjugation with the synthesized gold nanoparticles by aspartic acid. Also, we evaluated apoptosis induction capacity of the selected compound with the help of fluorescent dyes and DNA fragmentation. The result showed that the conjugated and non-conjugated forms of compound 4 were effective in inducing apoptosis and conjugated one had more efficiency and reduced the effective dose. Also, molecular modeling experiments involving compound 4 and colchicine binding site of tubulin dimer showed several strong hydrogen bonds and hydrophobic interactions to many important amino acid residues and GTP.

Production and Purification of Rabbit's Polyclonal Antibody Against Factor VIII.

The attempt is made to produce recombinant factor VIII but the first step in producing such product is production and purification of rabbit's polyclonal antibody against factor VIII. The second and third steps involve monoclonal antibody and recombinant factor VIII production. Factor VIII is one of the most important coagulating factor where its deficiency leads to diseases like hemophilia type A or classic. It is an inherited disease. Previously, it was obtained through fractionation of blood plasma of blood donors. After processing, factor VIII could be used to manage such patients. Due to transfer of viral disease like hepatitis and HIV through factor VIII obtained by fractionation, high cost of production, insufficiency of the donors and the process of virus removal, thus production of factor VIII through recombinant technology can be useful and helpful. The reaction between antibody and antigen is one the most specific reaction; therefore, such reaction can be employed to identify factor VIII. Thereby, rabbits were injected several times with adjuvant-linked antigen to produce antibody. The antibody was separated from the blood sample, purified and used to identify factor VIII in the research.

Crocus sativus L. (Saffron) extract and its active constituents (crocin and safranal) on ischemia-reperfusion in rat skeletal muscle.

Saffron and its constituents have been shown to decrease ischemia-reperfusion (I/R) injury in kidney or brain tissues. In this study, the effects of saffron ethanolic extract and its constituents, crocin and safranal, were evaluated in skeletal muscle during I/R injury. Hind limb ischemia was induced using clamping the common femoral artery and vein. After 2 h ischemia, the clamp of the femoral vessels of animals was taken off and the animal underwent 1h reperfusion. Muscle injuries were evaluated by recording of the electromyographic (EMG) potentials and performing some biochemical analysis including thiobarbituric acid reactive substances (TBARS), total sulfhydryl (SH) groups and antioxidant capacity of muscle (using FRAP assay). The ethanolic extract of saffron (5, 20 and 80 mg kg(-1)), crocin (50, 200 and 400 mg kg(-1)), safranal (0.1, 0.25 and 0.5 ml kg(-1)) and normal saline (10 ml kg(-1)) were administered intraperitoneally 1 h prior reperfusion. The average peak-to-peak amplitude during I/R was significantly increased in extract, crocin and safranal groups in comparison with control-ischemic group. Following saffron, crocin and safranal administration, the total SH contents and antioxidant capacity were elevated in muscle flap. The MDA level was declined significantly in test groups. It is concluded that saffron extract and its constituents show a protective effect against lower limb I/R in rat.