A smartphone-based sensor for detection of iron and potassium in food and beverage samples.

A novel approach for simultaneous detection of iron and potassium via a smartphone-based potentiometric method is proposed in this study. The screen printed electrodes were modified with carbon black nanomaterial and ion selective membrane including zinc (II) phtalocyanine as the ionophore. The developed Fe3+-selective electrode and K+-selective electrode exhibited detection limits of 1.0 × 10-6 M and 1.0 × 10-5 M for Fe3+ and K+ ions, respectively. The electrodes were used to simultaneously detect Fe3+ and K+ ions in apple juice, skim milk, soybean and coconut water samples with recovery values between 90%-100.5%, and validated against inductively coupled plasma-optical emission spectrometry. Due to the advantageous characteristics of the sensors and the portability of Near Field Communication potentiometer supported with a smartphone application, the proposed method offers sensitive and selective detection of iron and potassium ions in food and beverage samples at the point of need.

Emulsion-based edible chitosan film containing propolis extract to extend the shelf life of strawberries.

In this study, propolis was first loaded into a conventional oil-in-water emulsion, which was combined with a chitosan film-forming solution to produce propolis emulsion-loaded film (PEF). Strawberries inoculated with Botrytis cinerea coated with PEF and blank emulsion-loaded films (BEF) were stored for 14 days at 4 °C. Compared to BEF, PEF showed superior mechanical and oxygen barrier properties, as well as antioxidant activities, but higher moisture permeability. PEF showed less oil agglomeration on the film surface after drying, as demonstrated by scanning electron microscopy (SEM) analysis. Compared to uncoated strawberries, coatings did not have a significant effect on weight loss or firmness during storage. In contrast, coated strawberries showed elevated total phenolics, anthocyanins, and ascorbic acid retention; however, PEF-coating yielded higher values. Moreover, the PEF coating resulted in a significantly lower reduction of organic acid and total soluble solids. Mold growth was visible in both uncoated and BEF-coated strawberries after 7 days of storage, while PEF-coated fruits showed no visible mold until the end of storage. Starting from day 4, PEF-coated fruits showed lower mold counts (~2 log CFU/g) than other samples. Therefore, the PEF prepared in this study has application potential for the preservation of fresh fruits.

Optimization of extraction parameters of protein isolate from milk thistle seed: Physicochemical and functional characteristics.

In the current study, optimization of milk thistle protein extraction parameters was carried out in terms of purity and yield. In addition, the characterization of proteins isolated from milk thistle seeds was conducted. The optimal conditions for achieving the highest purity of protein (MTP) from milk thistle seeds were identified as extraction pH 9.47, temperature 30°C, and extraction time 180 min. Conversely, optimal values for overall protein yield (MTY) were determined at extraction pH 12, temperature 50°C, and extraction time 167 min. The proteins obtained under these two sets of conditions (MTP and MTY) demonstrated comparable oil absorption capacity (OAC), foaming, and emulsifying capabilities, as well as stability, aligning with findings from previous studies on seed protein. Both proteins had the highest protein solubilities at pH 11. Both proteins' zeta potentials were closest to zero at pH 4, demonstrating their closeness to the isoelectric point. MTP and MTY had poorer antioxidant capabilities than the other protein isolates/concentrates. MTP and MTY contain high ß sheet concentrations that might enhance thermal stability and lower the digestibility of proteins. In conclusion, the protein extraction process demonstrated a high potential for achieving both substantial yield and remarkable purity with some decent technological and functional properties, thus holding promise for various applications in diverse fields.

Optical biosensors for diagnosis of COVID-19: nanomaterial-enabled particle strategies for post pandemic era.

The COVID-19 pandemic underlines the need for effective strategies for controlling virus spread and ensuring sensitive detection of SARS-CoV-2. This review presents the potential of nanomaterial-enabled optical biosensors for rapid and low-cost detection of SARS-CoV-2 biomarkers, demonstrating a comprehensive analysis including colorimetric, fluorescence, surface-enhanced Raman scattering, and surface plasmon resonance detection methods. Nanomaterials including metal-based nanomaterials, metal-organic frame-based nanoparticles, nanorods, nanoporous materials, nanoshell materials, and magnetic nanoparticles employed in the production of optical biosensors are presented in detail. This review also discusses the detection principles, fabrication methods, nanomaterial synthesis, and their applications for the detection of SARS-CoV-2 in four categories: antibody-based, antigen-based, nucleic acid-based, and aptamer-based biosensors. This critical review includes reports published in the literature between the years 2021 and 2024. In addition, the review offers critical insights into optical nanobiosensors for the diagnosis of COVID-19. The integration of artificial intelligence and machine learning technologies with optical nanomaterial-enabled biosensors is proposed to improve the efficiency of optical diagnostic systems for future pandemic scenarios.

The evaluation of L-arginine solution as a solvent for propolis extraction: The phenolic profile, antioxidant, antibacterial activity, and in vitro bioaccessibility.

Ethanol has been widely used for the extraction of propolis. Due to its certain disadvantages, there has been an ongoing search to find alternative non-ethanolic extraction solvents. This study aimed to compare the phenolics, antioxidant, and antibacterial activity of propolis extracts prepared with 70% ethanol (EWE), propylene glycol (PGE), and L-arginine solution (BE). All extracts were subjected to an in vitro simulated digestion procedure, and the phenolic profile of non-digested and digested samples was determined by using LC-MS/MS. Additionally, the change in total phenolic (TPC), total flavonoid content (TFC), and antioxidant capacities were determined at each digestion phase. TPC and TFC of non-digested propolis extracts had similar values, although BE showed higher antioxidant capacity (p < .05). The amount of TPC reached or transformed at the intestinal stage was higher for BE and PG compared to EWE. BE also provided the highest antioxidant capacity assay in digested samples. The most common phenolics were pinocembrin, pinobanskin, galangin, and CAPE in non-digested extracts. However, their concentration was drastically reduced by digestion, and their recovery (R%) ranged from 0% to 9.38% of the initial amount detected in the non-digested extracts. Chrysin was the most bioaccessible flavonoid in all extracts. Among phenolic acids, the highest R% was determined for trans-cinnamic acid (22.14%) from BE. All extracts showed in vitro inhibitory activity against Escherichia coli and Staphylococcus aureus. This study suggests that an L-arginine solution could be used as an alternative solvent to ethanol and propylene glycol for propolis extraction.

CoSn(OH)6 nanocubes as a solid sorbent for the effective preconcentration of copper ions in cinnamon (Cinnamomum zeylanicum) extract.

This study was aimed at developing a simple and efficient CoSn(OH)6 nanocubes-based preconcentration method for the preconcentration of copper ions from cinnamon extracts for determination by flame atomic absorption spectrometry. The cube-shaped sorbent was synthesized using the simple stoichiometric co-precipitation method under ambient conditions. Experimental factors of the method were evaluated with a comprehensive optimization approach to maximize the extraction efficiency for the analyte. Under the optimal conditions, the limit of detection (LOD), limit of quantitation (LOQ), and linear dynamic range were recorded as 0.98 µg/L, 3.28 µg/L, and 4.0-75 µg/L, respectively. The enhancement factor was calculated as 101.6-fold by comparing the LODs of the optimized and direct analysis systems. Percent recoveries were found to be within an acceptable range (77.6-115 %), with high repeatability using matrix matching calibration strategy. Results validated the proposed method as a highly efficient extraction approach for the monitoring of copper ions in herbal cinnamon extracts.

Physicochemical and structural characterisation of a branched dextran type exopolysaccharide (EPS) from Weissella confusa S6 isolated from fermented sausage (Sucuk).

Exopolysaccharide (EPS) producing Lactic Acid Bacteria (LAB) species can be presented in distinct environments. In this study, Turkish fermented sausage (sucuk) was tested for the presence of EPS producer LAB strains and slimy-mucoid colonies were selected for further tests. Among the isolates, Weissella confusa strain S6 was identified and tested for the physicochemical characterisation of its EPS. This strain was found to produce 0.74 g L-1 of EPS in modified BHI medium conditions. Structural characterisation of EPS S6 by 1H and 13C NMR demonstrated that EPS S6 was a highly branched dextran type glucan formed by mainly (1 â†’ 2)-linked α-d-glucose units together with low levels of (1 â†’ 3)-linked α-d-glucose units as branching points. This structure was further confirmed by methylation analysis detected by GC-MS. An average molecular weight of 8 × 106 Da was detected for dextran S6. The FTIR analysis supported the dextran structure and revealed the presence of distinct functional groups within dextran S6 structure. A strong thermal profile was observed for dextran S6 detected by DSC and TGA analysis and dextran S6 revealed a degradation temperature of 289 °C. In terms of physical status, dextran S6 showed amorphous nature detected by XRD analysis. SEM analysis of dextran S6 demonstrated its rough, compact and porous morphology whereas AFM analysis of dextran S6 detected in its water solution showed the irregularity with no clear cross-link within the dextran chains. These technological features of dextran S6 suggests its potential to be used for in situ or ex situ application during meat fermentations.

Isolation of Protein and Fiber from Hot Pepper Seed Oil Byproduct To Enhance Rheology, Emulsion, and Oxidative Stability of Low-Fat Salad Dressing.

This research aimed to explore the potential utilization of protein (P) and fiber (F) extracted from cold-pressed hot pepper seed oil byproduct (HPOB) in the enhancement of the rheological properties, emulsion stability, and oxidative stability of a low-fat salad dressing with 10% oil content. The assessment involved the examination of several aspects, including the physical qualities such as emulsion stability, rheological behavior, and particle size as well as the microstructure and oxidative stability. It is worth mentioning that all emulsions had desirable characteristics, including shear-thinning behavior characterized by a consistency index ranging from 6.82 to 22.32 Pa s, as well as viscoelasticity and recoverability. These qualities were notably improved with the addition of P and F of HBOP. During the thermal stability testing, it was observed that the low-fat dressing containing 1% P-1F exhibited minor changes in the G* value, indicating its exceptional emulsion stability. The control salad dressings in C1 samples contained 30% oil. (B): C2: samples containing 10% oil (low-fat salad dressing sample) exhibited ζ-potential values of -34.70 and -46.70 mV. The samples 1P-1F and 2P-1F exhibited the highest ζ-potential values. Furthermore, the increase in F resulted in a reduction in droplet size and elicited elevated values for the induction period (IP), with the exception of samples containing 1% protein, 3% fiber, and 10% oil (1P-3F). The salad dressings that included P-F exhibited enhanced oxidative stability, demonstrated by their longer IP (ranging from 5.11 to 7.04 h) compared to the control samples. The formulation consisting of samples contained 1% protein, 1% fiber, and 10% oil (1P-1F) and samples contained 2% protein, 1% fiber, and 10% oil (2P-1F) exhibited superior ζ-potential, emulsion stability, and recovery rate compared to other formulations. The findings of this investigation indicate that the interaction of proteins and fibers extracted from HPOB exhibits the potential to enhance the rheological characteristics, emulsion stability, and oxidative stability of low-fat salad dressing.

The Effects of Different Drying Methods on the In Vitro Bioaccessibility of Phenolics, Antioxidant Capacity, and Morphology of European Plums (Prunes domestica L.).

Four different drying methods, hot-air-drying (HAD), vacuum-drying (VD), ultrasound-assisted vacuum-drying (US-VD), and freeze-drying (FD), were used to obtain dried plums (Prunes domesticaL.). These prunes were evaluated for their physical properties (such as color, rehydration ratio, and microstructural properties), phenolic compounds, and antioxidant activities before and after being subjected to in vitro digestion. TPC (total phenolic content) of plums ranged from 196.84 to 919.58 mg of GAE (gallic acid equivalent)/100 g of dw, and neochlorogenic acid was the most abundant phenolic compound. FD prunes had the highest levels of phenolics, whereas US-VD caused the most significant loss. During in vitro digestion, the phenolics were present at higher levels at the gastric medium but failed to maintain their stability at the small intestinal stage. Among the samples, FD along with HAD prunes exhibited a higher bioaccessibility index for most of the phenolic compounds. The ratios of TPC, TFC (total flavonoid content), and individual phenolics determined in the digested residues to the initial values of the undigested samples ranged from 0.23 to 31.03%. It could be concluded that the majority of the phenolics were extracted during digestion. Our findings showed that the different drying methods would alter the microstructure, which would affect the extractability and release of phenolics in the simulated digestion model.

Cold-Pressed Okra Seed Oil Byproduct as an Ingredient for Muffins to Decrease Glycemic Index, Maillard Reaction, and Oxidation.

This study aimed to investigate the effects of adding cold-pressed okra seed oil byproduct (OSB) to the muffin formulation, as a partial substitute for wheat flour, on the nutritional, physicochemical, rheological, textural, and sensory properties of muffins. The carbohydrate, protein, oil, moisture, and ash contents of OSB were 44.96, 32.34, 10.21, 7.51, and, 4.98%, respectively, indicating that OSB was rich in protein and carbohydrate. All muffin samples showed a shear thinning behavior, indicating that the viscosity of all samples decreased with increasing shear rate. The frequency sweep test showed that all samples showed viscoelastic solid-like structure [G' (storage modulus)> G″ (loss modulus)]. The K' values (between 66.45 and 139.14) were higher than the K″ values (between 36.62 and 80.42) for all samples. The result was another indication of the viscoelastic solid characteristic of the samples. In our study, it was found that the fluorescence of advanced Maillard products and soluble tryptophan index decreased with increasing amount of OSB, indicating that OSB addition led to a decrease in the amount of fluorescent Maillard reaction (MR) products. The fortified muffins with more than 10% OSB had a reduced estimated glycemic index (GI) significantly in comparison with control muffin samples (p < 0.05). The induction period (IP) values of the muffin samples containing OSB (between 11:57 and 15:15 h/min) were higher than the IP value of the control sample (10:50 h/min), indicating that OSB improved the oxidative stability of the muffin samples. The addition of OSB has shown no negative effect on sensory attributes considering texture, mouth fell, odor, and taste. This study suggested that the addition of OSB in muffins could improve rheological properties and oxidative stability and decrease GI and the amount of MR products without negative impact on sensory properties.

Development of microencapsulated grape juice powders using black 'Isabel' grape peel pectin and application in jelly formulation with enhanced in vitro bioaccessibility of anthocyanins.

In this study, pigmented pectin (grape pectin, GP) was extracted from the peels of black Isabel grapes. This highly methoxylated GP was composed mainly of galacturonic acid, arabinose, and other neutral monosaccharides. Its red color was ascribed to the anthocyanin content, and the main contribution was from malvidin-3-O-glucoside. To improve the yield and color properties of spray-dried Isabel grape juice powders, maltodextrin (MD) was substituted with this colored GP. When 25% of MD was substituted with GP, the powder yield increased from 46.0% to 60.4%, but it decreased to 21% when the substitution was 40%. GP inclusion increased the encapsulation efficiency of total anthocyanin in powders from 55.70% to 88.66%. When this spray-dried grape juice powder containing GP was utilized in a jelly recipe (4%-10%), a higher level of inclusion yielded stronger and more brittle jellies. When the jellies containing varying amounts of GP were subjected to in vitro digestion, the formulation with a higher amount of GP yielded a higher recovery of anthocyanins. In addition to being utilized as a carrier agent for spray-drying applications, this pigmented GP can also be tailored for a variety of applications, such as the development of pH-sensitive edible films and functional beverage formulations.

Multilocus sequence typing of L. bulgaricus and S. thermophilus strains from Turkish traditional yoghurts and characterisation of their techno-functional roles.

In this study, Streptococcus thermophilus and Lactobacillus bulgaricus strains from traditional Turkish yoghurts were isolated, identified by 16S rRNA sequencing and genotypically 14 S. thermophilus and 6 L. bulgaricus strains were obtained as distinct strains by MLST analysis. Lactic acid production levels of the L. bulgaricus strains were higher than S. thermophilus strains. HPLC analysis showed that EPS monosaccharide composition of the strains mainly consisted of glucose and galactose. In general, all strains were found to be susceptible for antibiotics, except some strains were resistance to gentamicin and kanamycin. Apart from two strains of S. thermophilus, all strains displayed strong auto-aggregation level greater than 95% at 24 h incubation. S. thermophilus strains showed higher cell surface hydrophobicity than L. bulgaricus strains. This study demonstrated the isolation, identification, genotypic discrimination and techno-functional features of wild type yoghurt starter cultures which can potentially find place in industrial applications. Supplementary Information: The online version contains supplementary material available at 10.1007/s10068-023-01366-2.

A New Functional Wheat Flour Flatbread (Bazlama) Enriched with High-ß-Glucan Hull-Less Barley Flour.

Although the Med-Diet is a healthy diet model, it is affected by current dietary habits. Therefore, new foods with improved nutritional value should be developed to respond to the needs of people following the Med-Diet. This study was focused on developing high-ß-glucan flat bread (bazlama) with a relatively lower GI. A bread wheat (cv. Tosunbey) flour was enriched with the flour of a high-ß-glucan-content hull-less barley (cv. Chifaa) flour (15, 30, 45 and 60%) to develop a functional bazlama. The nutritional and technological properties of bazlama samples enriched with barley flour were compared with the ones produced from bread wheat. All of the barley flour-enriched bazlama samples had higher yellowness values (b*) than the control (both crumb and crust), which is generally preferred by the consumers. Texture results indicated that bazlama samples became harder with the increase in barley flour supplementation level. The results showed that 3 g of ß-glucan can be provided from the barley flour-enriched bazlama samples (at 45 and 60% levels), and this is the limit to carry health claims. The bazlama samples enriched with barley flour were richer in Mg, K, Mn, Fe, and Zn minerals than the control (100% Tosunbey flour). While the glycemic index (GI) of commercial bread wheat and Tosunbey bazlama samples were high (88.60% and 79.20%, respectively), GI values of the bazlama samples enriched with 60% (64.73) and 45% barley flour (68.65) were medium. The lower GI values of barley flour-enriched bazlama samples are probably due to the higher ß-glucan contents of the bazlama samples. Additionally, as the barley flour supplementation level of the bazlama samples increased, the phenolics and antioxidant capacities of free and bound extracts increased compared to bread wheat bazlama. The results indicated that hull-less barley (cv. Chifaa) with high ß-glucan content may be utilized at relatively higher levels (45 and 60%) to produce bazlama with improved nutritional properties.

Influence of Different Drying Techniques on the Drying Kinetics, Total Bioactive Compounds, Anthocyanin Profile, Color, and Microstructural Properties of Blueberry Fruit.

In this study, four different drying techniques, namely, hot air drying (HAD), vacuum drying (VD), ultrasound-assisted vacuum drying (UAVD), and freeze-drying (FD), were applied to blueberries. The drying times of blueberries were 1290, 1050, and 990 min for HAD, VD, and UAVD, respectively, meaning that ultrasound application significantly reduced the drying time. All dried samples except those with FD showed lower total phenolic content and antioxidant capacity than fresh samples. Samples dried with FD had a higher content of bioactive compounds than those dried with other techniques followed by UAVD. The malvidin-3-O-galactoside was the most abundant anthocyanin in the blueberries and was significantly reduced after drying with HAD, VD, and UAVD. Scanning electron microscopy (SEM) analysis of the blueberries dried with FD and UAVD exhibited less shrinkage and cell disruption and more structure. The color parameters L*, a*, and b* values of the samples were significantly affected by the drying technique (p < 0.05). According to the findings of this study, ultrasound-assisted drying technology could be employed to shorten the drying time and improve bioactive retention in blueberry fruits.

Effects of Casein Hydrolysate Prepared with Savinase on the Quality of Bread Made by Frozen Dough.

The effect of casein savinase hydrolysate (CSH) usage on frozen dough (1%, 1.5% and 2%, g/100 g flour) was investigated in terms of rheological, thermal and structural characteristics of wheat doughs and the textural and color properties of corresponding breads. Rheological measurements showed that CSH addition into dough led to a reduction in G' and G″ values, but a similar trend was not observed in frozen dough samples. The increase in protein band intensity was observed for control dough (CD) after frozen storage (-30 °C, 28 days), while there were no increases in the band intensities of the doughs with CSH. The freezable water content of unfrozen doughs decreased gradually with the addition of CSH, dependent on concentration level. Frozen storage caused a notable reduction in the α-helices structure of the CD sample (p < 0.05) while no significant variation was observed for the doughs containing CSH (p > 0.05). The lowest specific volume reduction and hardness increment were observed for the breads containing 1.5% and 2% CSH. Frozen storage caused a significant reduction in the b* value of bread crust (p < 0.05), while no significant effect was observed for L* and a* value during frozen storage (p > 0.05). Overall, CSH incorporation into frozen dough can be an alternative that could reduce the quality deterioration of frozen bread.

Quality, Nutritional Properties, and Glycemic Index of Colored Whole Wheat Breads.

The main aim of this study was to investigate the quality and nutritional properties (dietary fiber, phenolic, antioxidant contents, and glycemic index) of breads made from whole wheat flours of colored wheats. White (cultivar Agronomicheskaya 5), red (Element 22), purple (EF 22 and Purple 8), and blue (Blue 10) colored wheats were used in the study. The whole wheat flours of Blue 10 and Purple 8 had higher farinograph stability, lower softening degree, and higher quality numbers indicating that they had better rheological properties. Bread produced from whole wheat flour of blue-colored grain had significantly higher loaf volume and better symmetry, crust color, crumb cell structure, and softness values among others (p < 0.05). The whole wheat bread produced using Element 22 had the highest crust and crumb L* color values, while Purple 8 and EF 22 had the lowest crust and crumb L* color values, suggesting that purple-colored grains have a tendency to make whole wheat bread with darker crust and crumb color. Bread produced from cultivar Blue 10 had the lowest firmness values while Element 22 had the highest firmness values. The highest total phenolic content and antioxidant capacity values were obtained from the whole wheat bread sample from purple-colored wheat (Purple 8). The whole wheat flour of Element 22 had the highest total dietary fiber content among all samples (p < 0.05). The differences between whole wheat bread samples in terms of total dietary fiber and glycemic index were not statistically significant. The results of the present study indicated that colored wheats can be used to produce whole wheat breads with higher nutritional properties and acceptable quality characteristics.

Phenolic Content and Antioxidant Capacity of Synthetic Hexaploid Wheats.

In this study, 21 synthetic hexaploid wheat samples were analyzed and compared for phenolic content (the Folin-Ciocalteu method), phenolic compositions, and antioxidant activity (DPPH, ABTS, and CUPRAC). The aim of the study was to determine the phenolic content and antioxidant activity of synthetic wheat lines developed from Ae. Tauschii, which has a wide genetic diversity, to be used in breeding programs for developing new varieties with better nutritional properties. Bound, free, and total phenolic contents (TPCs) of wheat samples were determined as 145.38-258.55 mg GAE/100 g wheat, 188.19-369.38 mg GAE/100 g wheat, and 333.58-576.93 mg GAE/100 g wheat, respectively. Phenolic compositions were detected by the HPLC system. Gallic acid was found in the highest concentrations in free fractions, whereas gallic, p-coumaric acid, and chlorogenic acid were generally found in the highest concentrations in bound fractions of the synthetic hexaploid wheat samples. The antioxidant activities (AA%) of the wheat samples were evaluated by the DPPH assay. AA% in the free extracts of the synthetic red wheat samples ranged from 33.0% to 40.5%, and AA% values in the bound extracts of the synthetic hexaploid wheat samples varied between 34.4% and 50.6%. ABTS and CUPRAC analyses were also used to measure antioxidant activities. The ABTS values of the free and bound extracts and total ABTS values of the synthetic wheat samples ranged from 27.31 to 123.18, 61.65 to 263.23, and 93.94 to 308.07 mg TE/100 g, respectively. The corresponding CUPRAC values of the synthetic wheats were between 25.78-160.94, 75.35-308.13, and 107.51-364.79 mg TE/100 g. This study revealed that synthetic hexaploid wheat samples are valuable resources for breeding programs for developing new wheat varieties with higher concentrations and better compositions of health-beneficial phytochemicals. The samples w1 (Ukr.-Od. 1530.94/Ae. squarrosa (629)), w18 (Ukr.-Od. 1530.94/Ae. squarrosa (1027)), and w20 (Ukr.-Od. 1530.94/Ae. squarrosa (392)) can be used as a genetic resource in breeding programs to enhance the nutritional quality of wheat.

Capsaicin Rich Low-Fat Salad Dressing: Improvement of Rheological and Sensory Properties and Emulsion and Oxidative Stability.

This study aimed to investigate the potential use of cold-pressed hot pepper seed oil by-product (HPOB) in a low-fat salad dressing to improve its rheological properties, emulsion, and oxidative stability. The total phenolic content (TPC), the 2,2-Diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity, and CUPRIC reducing antioxidant capacity (CUPRAC) values were 317.4 mg GAE/100 g, 81.87%, and 6952.8 mg Trolox/100 g, respectively. The capsaicin, dihydrocapsaicin, and total carotenoid content were 175.8 mg/100 g, 71.01 mg/100 g, and 106.3 µg/g, respectively. All emulsions indicated shear-thinning, viscoelastic solid-like behavior, and recoverable characteristics, which were improved via enrichment with HPOB. The thermal loop test showed that the low-fat sample formulated with 3% HPOB indicated little change in the G* value, showing that it exhibited high emulsion stability. The induction period values (IP) of the salad dressing samples containing HPOB (between 6.33 h and 8.33 h) were higher than the IP values of the control samples (3.20 h and 2.58 h). The enrichment with HPOB retarded the formation of oxidative volatile compounds of hexanal, nonanal, and 1-octene-3-ol. According to the results presented in this study, HPOB could be effectively used in a low-fat salad dressing to enhance its rheological characteristics and oxidative stability.

Utilisation of an active branching sucrase from Lactobacillus kunkeei AP-37 to produce techno-functional poly-oligosaccharides.

Glucansucrase AP-37 was extracted from the culture supernatant of Lactobacillus kunkeei AP-37 and characteristics of the glucan produced by the active glucansucrase in terms of structural and functional roles were determined in this study. A molecular weight around 300 kDa was observed for glucansucrase AP-37 and its acceptor reactions with maltose, melibiose and mannose were also conducted to unveil the prebiotic potential of the poly-oligosaccharides formed via these reactions. The core structure of glucan AP-37 was determined by 1H and 13C NMR and GC/MS analysis which revealed that glucan AP-37 was a highly branched dextran composing of high levels of (1 â†’ 3)-linked α-d-glucose units with low levels of (1 â†’ 2)-linked α-d-glucose units. The structural features of the glucan formed, demonstrated that glucansucrase AP-37 was an α-(1 â†’ 3) branching sucrase. Dextran AP-37 was further characterised by FTIR analysis and XRD analysis demonstrated its amorphous nature. A fibrous compact morphology was observed for dextran AP-37 with SEM analysis whereas TGA and DSC analysis revealed its high stability as no degradation was observed up to 312 °C. Finally, the prebiotic potential of the dextran AP-37 and the gluco-oligosaccharides produced with the acceptor reaction of α-(1 â†’ 3) branching sucrase AP-37 were determined and promising results were found for the gluco-oligosaccharides to act as prebiotics.

The Potential Use of Cold-Pressed Coconut Oil By-Product as an Alternative Source in the Production of Plant-Based Drink and Plant-Based Low-Fat Ice Cream: The Rheological, Thermal, and Sensory Properties of Plant-Based Ice Cream.

This study aimed to investigate the potential use of cold-pressed coconut oil by-products (COB) as a low-cost alternative source for plant-based drink and ice cream production. Firstly, a plant-based drink was produced from cold-pressed coconut oil by-products (COB drink) and compared with a commercial coconut drink. The fat, protein, and zeta potential values of coconut drink obtained from COB were higher than those of the commercial samples. In addition, the particle size value of the drink obtained from COB was found to be lower than that of the commercial drink. In the second stage, full-fat and low-fat plant-based ice cream samples using COB drink were produced and compared to control ice cream samples (produced by the commercial coconut drink) in terms of rheological, sensorial, and thermal properties. Rheological analysis showed that all plant-based ice cream samples indicated pseudoplastic, solid-like, and recoverable characteristics. Low-fat commercial control ice cream samples (C1) indicated the lowest K value (9.05 Pasn), whereas the low-fat plant-based ice cream sample produced by the COB drink (COB-3) exhibited the highest K value (17.69 Pasn). ΔHf values of the plant-based ice cream samples varied from 144.70 J/g to 172.70 J/g. The low-fat COB ice cream stabilized with 3% COB and full-fat COB ice cream samples showed lower ΔHf values than control ice cream samples, indicating that the COB ice cream showed desired thermal properties. The COB drink may be utilized in plant-based ice cream without altering sensory qualities, and low-fat ice cream could be manufactured in the same manner to attain full-fat ice cream quality characteristics. The results of this study demonstrated that COB can be successfully used as an inexpensive raw material source in the production of full-fat and reduced-fat vegetable-based ice cream.