Exploring the impact of type II diabetes mellitus on voice quality.

PURPOSE: This cross-sectional study aimed to investigate the potential of voice analysis as a prescreening tool for type II diabetes mellitus (T2DM) by examining the differences in voice recordings between non-diabetic and T2DM participants. METHODS: 60 participants diagnosed as non-diabetic (n = 30) or T2DM (n = 30) were recruited on the basis of specific inclusion and exclusion criteria in Iran between February 2020 and September 2023. Participants were matched according to their year of birth and then placed into six age categories. Using the WhatsApp application, participants recorded the translated versions of speech elicitation tasks. Seven acoustic features [fundamental frequency, jitter, shimmer, harmonic-to-noise ratio (HNR), cepstral peak prominence (CPP), voice onset time (VOT), and formant (F1-F2)] were extracted from each recording and analyzed using Praat software. Data was analyzed with Kolmogorov-Smirnov, two-way ANOVA, post hoc Tukey, binary logistic regression, and student t tests. RESULTS: The comparison between groups showed significant differences in fundamental frequency, jitter, shimmer, CPP, and HNR (p < 0.05), while there were no significant differences in formant and VOT (p > 0.05). Binary logistic regression showed that shimmer was the most significant predictor of the disease group. There was also a significant difference between diabetes status and age, in the case of CPP. CONCLUSIONS: Participants with type II diabetes exhibited significant vocal variations compared to non-diabetic controls.

Factors influencing different types of malocclusion and arch form-A review.

AIM: This review intends to highlight malocclusion as a multifactorial issue and review the different factors that influence different types of malocclusion and arch form. METHODS: An online article search was performed on the factors influencing malocclusion and arch form from January 1990 through April 2020. The search was performed within the Google, Rutgers library, PubMed, MEDLINE databases via OVID using the keywords mentioned in the PubMed and MeSH headings for the English language published articles January 1990 through April 2020, which evaluated different factors that influence malocclusion and arch form. RESULTS: Of the 300 articles found in initial search results, 31 articles met the inclusion criteria set for this review. These 31 studies were directly related to the factors that impact malocclusion and different arch forms. CONCLUSION: Genetic inheritance, genetic mutations, age, gender, ethnicity, dental anomalies like macrodontia, congenital diseases, muscular diseases, hormone imbalance, and human behaviour are all factors that influence malocclusion and arch forms. The elements within the individual's control like behaviours can aid in preventing malocclusion. However, it seems as if the underlying reason for most of these factors indicates that malocclusion is a by-product of genetics and pathology.

The role of angiogenesis in implant dentistry part I: Review of titanium alloys, surface characteristics and treatments.

BACKGROUND: Angiogenesis plays an important role in osseointegration process by contributing to inflammatory and regenerative phases of surrounding alveolar bone. The present review evaluated the effect of titanium alloys and their surface characteristics including: surface topography (macro, micro, and nano), surface wettability/energy, surface hydrophilicity or hydrophobicity, surface charge, and surface treatments of dental implants on angiogenesis events, which occur during osseointegration period. MATERIAL AND METHODS: An electronic search was performed in PubMed, MEDLINE, and EMBASE databases via OVID using the keywords mentioned in the PubMed and MeSH headings regarding the role of angiogenesis in implant dentistry from January 2000-April 2014. RESULTS: Of the 2,691 articles identified in our initial search results, only 30 met the inclusion criteria set for this review. The hydrophilicity and topography of dental implants are the most important and effective surface characteristics in angiogenesis and osteogenesis processes. The surface treatments or modifications of dental implants are mainly directed through the enhancement of biological activity and functionalization in order to promote osteogenesis and angiogenesis, and accelerate the osseointegration procedure. CONCLUSIONS: Angiogenesis is of great importance in implant dentistry in a manner that most of the surface characteristics and treatments of dental implants are directed toward creating a more pro-angiogenic surface on dental implants. A number of studies discussed the effect of titanium alloys, dental implant surface characteristic and treatments on agiogenesis process. However, clinical trials and in-vivo studies delineating the mechanisms of dental implants, and their surface characteristics or treatments, action in angiogenesis processes are lagging.

The role of angiogenesis in implant dentistry part II: The effect of bone-grafting and barrier membrane materials on angiogenesis.

BACKGROUND: In implant dentistry, bone substitute materials and barrier membranes are used in different treatments including guided bone regeneration (GBR), socket preservation, alveolar ridge augmentation, maxillary sinus elevation, and filling bony defects around the inserted dental implant. One of the most important factors in prognosis of treatments using these materials is the growth of new blood vessels in applied areas. Present review was performed to evaluate the effect of the bone-grafting and barrier membrane materials on angiogenesis events. MATERIAL AND METHODS: An electronic search was performed in PubMed, MEDLINE, and EMBASE databases via OVID using the keywords mentioned in the PubMed and MeSH headings regarding the role of angiogenesis in implant dentistry from January 2000-April 2014. RESULTS: Of the 5,622 articles identified in our initial search results, only 33 met the inclusion criteria set for this review. Among bone substitute materials the autogenous bone-grafts, and among the barrier membranes the collagenous membranes, had the highest angiogenic potentials. Other bone-grafting materials or membranes were mostly used with pro-angiogenic factors to enhance their angiogenic properties. CONCLUSIONS: Angiogenesis is one of the key factors, which plays a critical role in success rate of GBR technique and is seriously considered in manufacturing bone-grafting and barrier membrane materials. However, there is still lack of clinical and in-vivo studies addressing the effect of angiogenesis in treatments using bone-grafting and barrier membrane materials.

Comparison of pulp response to mineral trioxide aggregate and a bioceramic paste in partial pulpotomy of sound human premolars: a randomized controlled trial.

AIM: This randomized clinical trial evaluated clinical sign/symptoms as well as histological pulp reactions in terms of inflammation and mineralized bridge formation after partial pulpotomy of sound human premolars and placement of a bioceramic paste (iRoot BP) or tooth-colored ProRoot MTA as pulp-covering biomaterials. METHODOLOGY: Twenty-four human sound premolars were randomly allocated into two experimental groups (n = 12) treated either with iRoot BP or MTA subsequent to partial pulpotomy. Six weeks after treatment, clinical sign/symptoms and radiographic changes were evaluated. The teeth were then extracted and examined histologically for inflammatory status of the pulp, formation of hard tissue bridge and appearance of the bridge. In terms of pulp inflammation and dentinal bridge formation, the Mann-Whitney U, and for clinical signs, the chi-square test was used (α = 0.05). RESULTS: In terms of pulp inflammation, formation of hard tissue bridge and its appearance, the differences between the two experimental groups were not significant. However, clinical sensitivity to cold was significantly less for teeth treated with MTA (P < 0.05). All cases had formed a hard tissue bridge, and none of the specimens in either group had pulpal necrosis. CONCLUSION: When treating teeth with healthy pulps, the response to partial pulpotomy treatment with both MTA and iRoot BP was favourable. However, pulps covered with iRoot BP were more sensitive to cold stimuli.

Bioactivity of EndoSequence root repair material and bioaggregate.

AIM: To evaluate the bioactivity of Bioaggregate (BA), EndoSequence Root Repair Material (ERRM), and white ProRoot Mineral trioxide aggregate (MTA). METHODOLOGY: Sixty horizontal root sections with standardized canal spaces were divided randomly into 3 groups (n = 20) and filled with white ProRoot MTA (groups 1 and 2), BA (groups 3 and 4) or ERRM putty (groups 5 and 6). The specimens of groups 1, 3 and 5 (each of 10) were immersed in phosphate-buffered saline (PBS) for 1 week and those of groups 2, 4 and 6 (each of 10) for 2 months. After the experimental periods, the specimens were processed for scanning electron microscopy (SEM) observations. Precipitation of apatite crystals on the surfaces of the cements and/or at the dentine-cement interface was evaluated and analysed elementally by energy dispersive X-ray (EDX) instrument. RESULTS: Analysis of specimens revealed various surface morphologies that were dependent on the material and immersion time in PBS. The formation of precipitates was observed on the surfaces of all materials at 1 week, which increased substantially over time. After 2 months, the surface of the cements was changed dramatically and consisted of a substantially greater amount of apatite aggregates. Interfacial layers in some areas of the dentine-cement interface were found only following 2 months of immersion. Precipitates on MTA revealed high peaks of Ca, Si and O after 1 week of immersion; after 2 months, high peaks of Ca, P and O were present. Precipitates on BA and ERRM displayed high Ca, P O peaks after both 1 week and 2 months. CONCLUSION: Exposure of MTA, BA and ERRM to PBS resulted in precipitation of apatite crystalline structures that increased over time. This suggests that the tested materials are bioactive.

Nanomodification of mineral trioxide aggregate for enhanced physiochemical properties.

AIM: To analyse the physicochemical properties of a Nano white mineral trioxide aggregate (NWMTA) and compare it with white mineral trioxide aggregate (WMTA). METHODOLOGY: White mineral trioxide aggregate and NWMTA were prepared and mixed according to the manufacturer's instructions. Surface area of powder before hydration, setting time, X-ray diffraction and microhardness at pH values of 4.4 and 7.4 were evaluated by Brunauer-Emmett-Teller, ISO Specification no.6876, Vickers microhardness, and energy-dispersive X-ray spectroscopy equipped with X-ray colour (dot) map for both cements. anova and Mann-Whitney were used for statistical analysis at a significance level of 0.5. RESULTS: The mean ± SD of surface area and setting time were 1.8 ± 0.2 m(2) g(-1) and 43 ± 2 min for WMTA and 7.8 ± 1.2 m(2) g(-1) and 6 ± 1 min for NWMTA, respectively. Mean ± SD of Microhardness were 16 ± 2, 51 ± 1, 69 ± 1 and 81 ± 2 for WMTA at pH values of 4.4 and 7.4 and for NWMTA correspondingly. Numbers of open porosity over the surface were 88 ± 24 and 44 ± 13 for WMTA and NWMTA, respectively. Statistical tests revealed significant differences between the groups (P < 0.001) in surface area, setting time and surface hardness for both cements. Uniform distribution of strontium was only observed in NWMTA. However, other compounds were not significantly different. CONCLUSION: Increasing surface area of powder can reduce setting time and increase microhardness even at lower pH values after hydration.

A new approach for locating the minor apical foramen using an artificial neural network.

AIM: To develop a new approach for locating the minor apical foramen (AF) using feature-extracting procedures from radiographs and then processing data using an artificial neural network (ANN) as a decision-making system. METHODOLOGY: Fifty straight single-rooted teeth were selected and placed in a socket within the alveolar bone of a dried skull. Access cavities were prepared and a file was place in the canals to determine the working length. A radiograph was taken to evaluate the location of the file in relation to the minor foramen and further checked after retrieving the tooth from the alveolar socket. The location of the file tip was categorized into: beyond the AF (long), within the root canal (short) and just at the minor AF (exact). Each radiograph was used to extract relevant features using K-means, Otsu method and Wavelet protocol. Thirty-six extracted features were used for training and the rest were used for evaluating the multi-layer Perceptron ANN model. RESULTS: Analysis of the images from radiographs (test samples) by ANN showed that in 93% of the samples, the location of the AF had been determined correctly by false rejection and acceptation error methods. CONCLUSION: Artificial neural networks can act as a second opinion to locate the AF on radiographs to enhance the accuracy of working length determination by radiography. In addition, ANN can function as a decision-making system in various similar clinical situations.

Effects of three oral analgesics on postoperative pain following root canal preparation: a controlled clinical trial.

AIM: To compare the effects of single doses of three oral medications on postoperative pain following instrumentation of root canals in teeth with irreversible pulpitis. METHODOLOGY: In this double-blind clinical trial, 100 patients who had anterior or premolar teeth with irreversible pulpitis without any signs and symptoms of acute or chronic apical periodontitis and moderate to severe pain were divided by balanced block random allocation into four groups of 25 each, a control group receiving a placebo medication, and three experimental groups receiving a single dose of either Tramadol (100 mg), Novafen (325 mg of paracetamol, 200 mg ibuprofen and 40 mg caffeine anhydrous) or Naproxen (500 mg) immediately after the first appointment where the pulp was removed, and the canals were fully prepared. The intensity of pain was scored based on 10-point VAS before and after treatment for up to 24 h postoperatively. Data were submitted to repeated analysis of variance. RESULTS: At the 6, 12 and 24 h postoperative intervals after drug administration, the intensity of pain was significantly lower in the experimental groups than in the placebo group (P < 0.01). Tramadol was significantly less effective (P < 0.05) than Naproxen, and Novafen that were similar to each other (P > 0.05). CONCLUSION: A single oral dose of Naproxen, Novafen and Tramadol taken immediately after treatment reduced postoperative pain following pulpectomy and root canal preparation of teeth with irreversible pulpitis.