RESUMO
Monoclonal antibodies (mAbs) represent a promising modality for the prevention and treatment of viral infections. For infections that initiate from the respiratory tract, direct administration of specific neutralizing mAbs into lungs has advantages over systemic injection of the same mAbs. Herein, using AUG-3387, a human-derived mAb with high affinity to the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) and its various variants, as a model mAb, we formulated the mAb into dry powders by thin-film freeze-drying, confirmed that the AUG-3387 mAb reconstituted from the dry powders retained their integrity, high affinity to the SARS-CoV-2 spike protein receptor binding domain (RBD), as well as ability to neutralize RBD-expressing pseudoviruses. Finally, we showed that one of the AUG-3387 mAb dry powders had desirable aerosol properties for pulmonary delivery into the lung. We concluded that thin-film freeze-drying represents a viable method to prepare inhalable powders of virus-neutralizing mAbs for pulmonary delivery into the lung.
Assuntos
Anticorpos Monoclonais , Liofilização , Pós , SARS-CoV-2 , Glicoproteína da Espícula de Coronavírus , Anticorpos Monoclonais/química , Anticorpos Monoclonais/administração & dosagem , Administração por Inalação , SARS-CoV-2/imunologia , Glicoproteína da Espícula de Coronavírus/imunologia , Animais , Anticorpos Neutralizantes/imunologia , Anticorpos Neutralizantes/administração & dosagem , Humanos , Inaladores de Pó Seco , Aerossóis , Pulmão/metabolismo , COVID-19/prevenção & controle , Tratamento Farmacológico da COVID-19RESUMO
Monoclonal antibodies (mAbs) administered intranasally as dry powders can be potentially applied for the treatment or pre-exposure prevention of viral infections in the upper respiratory tract. However, a method to transform the mAbs from liquid to dry powders suitable for intranasal administration and a device that can spray the dry powders to the desired region of the nasal cavity are needed to fully realize the potentials of the mAbs. Herein, we report that thin-film freeze-dried mAb powders can be sprayed into the posterior nasal cavity using Aptar Pharma's Unidose (UDS) Powder Nasal Spray System. AUG-3387, a human-derived mAb that neutralizes the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), was used in the present study. First, we prepared thin-film freeze-dried AUG-3387 powders (i.e., TFF AUG-3387 powders) from liquid formulations containing different levels of mAbs. The TFF AUG-3387 powder with the highest solid content (i.e., TFF AUG-3387C) was then chosen for further characterization, including the evaluation of the plume geometry, spray pattern, and particle size distribution after the powder was sprayed using the UDS Powder Nasal Spray. Finally, the deposition patterns of the TFF AUG-3387C powder sprayed using the UDS Powder delivery system were studied using 3D-printed nasal replica casts based on the CT scans of an adult and a child. It is concluded that it is feasible to intranasally deliver mAbs as dry powders by transforming the mAbs into dry powders using thin-film freeze-drying and then spraying the powder using a powder nasal spray system.
Assuntos
Anticorpos Monoclonais , Sprays Nasais , Adulto , Criança , Humanos , Administração Intranasal , Pós , Química Farmacêutica/métodos , Liofilização , Tamanho da Partícula , Inaladores de Pó Seco , Administração por Inalação , AerossóisRESUMO
Asthma is a common chronic disease affecting the airways in the lungs. The receptors of allergic cytokines, including interleukin (IL)-4, IL-5, and IL-13, trigger the Janus kinase (JAK)/signal transducer and activator of transcription (STAT) pathway, which involves the pathogenesis of asthma. GDC-0214 is a JAK inhibitor that was developed as a potent and selective target for the treatment of asthma, specifically targeting the lungs. While inhaled GDC-0214 is a promising novel treatment option against asthma, improvement is still needed to achieve increased potency of the powder formulation and a reduced number of capsules containing powder to be inhaled. In this study, high-potency amorphous powder formulations containing GDC-0214 nanoaggregates for dry powder inhalation were developed using particle engineering technology, thin film freezing (TFF). A high dose per capsule was successfully achieved by enhancing the solubility of GDC-0214 and powder conditioning. Lactose and/or leucine as excipients exhibited optimum stability and aerosolization of GDC-0214 nanoaggregates, and aerosolization of the dose was independent of air flow through the device between 2 and 6 kPa pressure drops. In the rat PK study, formulation F20, which contains 80% GDC-0214 and 20% lactose, resulted in the highest AUC0-24h in the lungs with the lowest AUC0-24h in the plasma that corresponds to a 4.8-fold higher ratio of the lung-to-plasma exposures compared to micronized crystalline GDC-0214 powder administered by dry powder inhalation. Therefore, GDC-0214 nanoaggregates produced by TFF provided an improved dry powder for inhalation that can lead to enhanced therapeutic efficacy with a lower risk of systemic toxicity.
Assuntos
Asma , Inibidores de Janus Quinases , Ratos , Animais , Pós/química , Congelamento , Lactose , Administração por Inalação , Asma/tratamento farmacológico , Inaladores de Pó Seco , Tamanho da Partícula , Aerossóis e Gotículas RespiratóriosRESUMO
PURPOSE: This study was designed to test the feasibility of using thin-film freezing (TFF) to prepare aerosolizable dry powders of plasmid DNA (pDNA) for pulmonary delivery. METHODS: Dry powders of pDNA formulated with mannitol/leucine (70/30, w/w) with various drug loadings, solid contents, and solvents were prepared using TFF, their aerosol properties (i.e., mass median aerodynamic diameter (MMAD) and fine particle fraction (FPF)) were determined, and selected powders were used for further characterization. RESULTS: Of the nine dry powders prepared, their MMAD values were about 1-2 µm, with FPF values (delivered) of 40-80%. The aerosol properties of the powders were inversely correlated with the pDNA loading and the solid content in the pDNA solution before TFF. Powders prepared with Tris-EDTA buffer or cosolvents (i.e., 1,4-dioxane or tert-butanol in water), instead of water, showed slightly reduced aerosol properties. Ultimately, powders prepared with pDNA loading at 5% (w/w), 0.25% of solid content, with or without Tris-EDTA were selected for further characterization due to their overall good aerosol performance. The pDNA powders exhibited a porous matrix structure, with a moisture content of < 2% (w/w). Agarose gel electrophoresis confirmed the chemical integrity of the pDNA after it was subjected to TFF and after the TFF powder was actuated. A cell transfection study confirmed that the activity of the pDNA did not change after it was subjected to TFF. CONCLUSION: It is feasible to use TFF to produce aerosolizable pDNA dry powder for pulmonary delivery, while preserving the integrity and activity of the pDNA.
Assuntos
DNA , Água , Pós/química , Administração por Inalação , Congelamento , Ácido Edético , Aerossóis/química , DNA/genética , Plasmídeos , Água/química , Tamanho da Partícula , Inaladores de Pó Seco/métodosRESUMO
Niclosamide is an FDA-approved anthelmintic that is being studied in clinical trials as a chemotherapeutic and broad-spectrum antiviral. Additionally, several other applications are currently in the preclinical stage. Unfortunately, niclosamide is a poorly water soluble molecule, with reduced oral bioavailability, which hinders its use for new indications. Moreover, niclosamide is a poor glass former; in other words, the molecule has a high tendency to recrystallize, and it is virtually impossible to generate a stable amorphous solid employing the neat molecule. Previously, our group reported the development of an amorphous solid dispersion (ASD) of niclosamide (niclosamide ASD) that generates nanoparticles during its dissolution, not only increasing niclosamide's apparent solubility from 6.6 ± 0.4 to 481.7 ± 22.2 µg/mL in fasted state simulated intestinal fluid (FaSSIF) but also its oral bioavailability 2.6-fold in Sprague-Dawley rats after being administered as a suspension. Nevertheless, niclosamide ASD undergoes recrystallization in acidic media, and an enteric oral dosage form is needed for its translation into the clinic. In this work, we further characterized the nanoparticles that generated during the dissolution of the niclosamide ASD. Cryogenic transmission electron microscopy (Cryo-TEM) and wide-angle X-ray scattering (WAXS) revealed that the nanoparticles were amorphous and had a particle size of ~150 nm. The oral dosage forms of niclosamide ASD were formulated using commercial enteric capsules (Capsuline® and EudracapTM) and as enteric-coated tablets. The enteric dosage forms were tested using pH-shift dissolution and acid-uptake tests, using the USP type II dissolution apparatus and the disintegration apparatus, respectively. The capsules exhibited a higher percentage of weight gain, and visual rupture of the Capsuline capsules was observed. Eudracap capsules protected the formulation from the acidic media, but polymer gelling and the formation of a nondispersible plug were noted during dissolution testing. In contrast, enteric-coated tablets protected the formulation from acid ingress and maintained the performance of niclosamide ASD granules during dissolution in FaSSIF media. These enteric-coated tablets were administered to beagle dogs at a niclosamide dose of 75 mg/kg, resulting in plasma concentrations of niclosamide higher than those reported in the literature using solubilized niclosamide at a higher dose (i.e., 100 mg/kg). In summary, an enteric oral dosage form of niclosamide ASD was formulated without hindering the generation of nanoparticles while maintaining the increase in the niclosamide's apparent solubility. The enteric-coated tablets successfully increased the niclosamide plasma levels in dogs when compared to a niclosamide solution prepared using organic solvents.
RESUMO
Freezing techniques are an essential part of biologics manufacturing processes, yet the formation of ice/water interfaces can impart detrimental effects on proteins. However, the absence of chemical and structural differences between ice and liquid water poses the question as to why ice can destabilize proteins. We hypothesize that the destabilizing stress of the ice-liquid water interface does not originate from the ice-water system itself but rather from the air microbubbles present during the freezing process. As the temperature decreases, the dissolved air is expelled from the ice crystal lattices in the form of microbubbles and is subsequently trapped by the advancing ice front. This newly formed air-water interface represents an additional interfacial area for the proteins to be adsorbed onto and denatured. The result showed that freezing at â¼ 1 K/s led to the formation of small circular microbubbles with diameters ranging from 100 µm to 500 µm. In contrast, slower freezing resulted in the formation of larger, elongated millimeter-size bubbles. The reduction of the number of microbubbles was carried out by the deaeration process using agitation under reduced pressure at 20 kPa. The resulting deaerated (i.e., low dissolved air) protein samples were frozen and monitored for the formation of subvisible aggregates using micro-flow imaging (MFI). The results demonstrated that deaerating the samples prior to intermediate freezing (i.e., TFF) reduced the number of aggregates for both highly surface-active and low surface-active proteins (lactoferrin and bovine IgG, respectively). This reduction was more pronounced in spray freeze drying (SFD) than thin-film freezing (TFF), and less apparent in conventional lyophilization.
Assuntos
Gelo , Microbolhas , Bovinos , Animais , Congelamento , Liofilização , Proteínas/químicaRESUMO
Dry powder inhalers (DPIs) are one of the most widely used devices for treating respiratory diseases. Thin--film--freezing (TFF) is a particle engineering technology that has been demonstrated to prepare dry powder for inhalation with enhanced physicochemical properties. Aerosol performance, which is indicated by fine particle fraction (FPF) and mass median aerodynamic diameter (MMAD), is an important consideration during the product development process. However, the conventional approach for formulation development requires many trial-and-error experiments, which is both laborious and time consuming. As a state-of-the art technique, machine learning has gained more attention in pharmaceutical science and has been widely applied in different settings. In this study, we have successfully built a prediction model for aerosol performance by using both tabular data and scanning electron microscopy (SEM) images. TFF technology was used to prepare 134 dry powder formulations which were collected as a tabular dataset. After testing many machine learning models, we determined that the Random Forest (RF) model was best for FPF prediction with a mean absolute error of ± 7.251%, and artificial neural networks (ANNs) performed the best in estimating MMAD with a mean absolute error of ± 0.393 µm. In addition, a convolutional neural network was employed for SEM image classification and has demonstrated high accuracy (>83.86%) and adaptability in predicting 316 SEM images of three different drug formulations. In conclusion, the machine learning models using both tabular data and image classification were successfully established to evaluate the aerosol performance of dry powder for inhalation. These machine learning models facilitate the product development process of dry powder for inhalation manufactured by TFF technology and have the potential to significantly reduce the product development workload. The machine learning methodology can also be applied to other formulation design and development processes in the future.
Assuntos
Inaladores de Pó Seco , Tecnologia , Administração por Inalação , Aerossóis/química , Inaladores de Pó Seco/métodos , Congelamento , Aprendizado de Máquina , Tamanho da Partícula , Pós/químicaRESUMO
MF59® is an oil-in-water (O/W) nanoemulsion-based vaccine adjuvant that is often used in seasonal and pandemic influenza vaccines. We explored the feasibility of developing dry powders of vaccines adjuvanted with MF59 or AddaVax™, a preclinical grade equivalent of MF59 with the same composition and droplet size as MF59, by thin-film freeze-drying (TFFD). Liquid AddaVax alone was successfully converted to a dry powder by TFFD using trehalose as a stabilizing agent while maintaining the droplet size distribution of AddaVax after it was reconstituted. TFFD was then applied to convert liquid AddaVax-adjuvanted vaccines containing either a model antigen (e.g., ovalbumin) or mono-, bi-, and tri-valent recombinant hemagglutinin (rHA) protein-based H1 and/or H3 (universal) influenza vaccine candidates, as well as the MF59-containing Fluad® Quadrivalent influenza vaccine to dry powders. Both antigens and stabilizing agents affected the physical properties of the vaccines (e.g., mean particle size and particle size distribution) after the vaccines were subjected to TFFD. Importantly, the integrity and hemagglutination activity of the rHA antigens did not significantly change and the immunogenicity of reconstituted influenza vaccine candidates was maintained when evaluated in a mouse model. The vaccine dry powder was not sensitive to repeated freezing-and-thawing, in contrast to its liquid counterpart. It is concluded that TFFD can be applied to convert liquid vaccines containing MF59 or AddaVax to dry powders while maintaining the immunogenicity of the vaccines. Ultimately, TFFD technology may be used to prepare dry powders of multivalent universal influenza vaccines.
Assuntos
Vacinas contra Influenza , Adjuvantes Imunológicos , Animais , Anticorpos Antivirais , Excipientes , Camundongos , Polissorbatos , Pós , EsqualenoRESUMO
Biological macromolecules, especially therapeutic proteins, are delicate and highly sensitive to denaturation from stresses encountered during the manufacture of dosage forms. Thin-film freeze-drying (TFFD) and spray freeze-drying (SFD) are two processes used to convert liquid forms of protein into dry powders. In the production of inhalable dry powders that contain proteins, these potential stressors fall into three categories based on their occurrence during the primary steps of the process: (1) droplet formation (e.g., the mechanism of droplet formation, including spray atomization), (2) freezing, and (3) frozen water removal (e.g., sublimation). This study compares the droplet formation mechanism used in TFFD and SFD by investigating the effects of spraying on the stability of proteins, using lactoferrin as a model. This study considers various perspectives on the denaturation (e.g., conformation) of lactoferrin after subjecting the protein solution to the atomization process using a pneumatic two-fluid nozzle (employed in SFD) or a low-shear drop application through the nozzle. The surface activity of lactoferrin was examined to explore the interfacial adsorption tendency, diffusion, and denaturation process. Subsequently, this study also investigates the secondary and tertiary structure of lactoferrin and the quantification of monomers, oligomers, and, ultimately, aggregates. The spraying process affected the tertiary structure more negatively than the tightly woven secondary structure, resulting in the peak position corresponding to the tryptophan (Trp) residues red-shifting by 1.5 nm. This conformational change can either (a) be reversed at low concentrations via relaxation or (b) proceed to form irreversible aggregates at higher concentrations. Interestingly, when the sample was allowed to progress into micrometer-sized aggregates, such a dramatic change was not detected using methods such as size-exclusion chromatography, polyacrylamide gel electrophoresis, and dynamic light scattering at 173°. A more complete understanding of the heterogeneous protein sample was achieved only through a combination of 173 and 13° backward and forward scattering, a combination of derived count rate measurements, and microflow imaging (MFI). After studying the impact of droplet formation mechanisms on aggregation tendency of lactoferrin, we further investigated two additional model proteins with different surface activity: bovine IgG (serving as a non surface-active negative reference), and ß-galactosidase (another surface-active protein). The results corroborated the lactoferrin findings that spray-atomization-related stress-induced protein aggregation was much more pronounced for proteins that are surface active (lactoferrin and ß-galactosidase), but it was minimal for non-surface-active protein (bovine IgG). Finally, compared to the low-shear dripping used in the TFFD process, lactoferrin underwent a relatively fast conformational change upon exposure to the high air-water interface of the two-fluid atomization nozzle used in the SFD process as compared to the low shear dripping used in the TFFD process. The interfacial-induced denaturation that occurred during spraying was governed primarily by the size of the atomized droplets, regardless of the duration of exposure to air. The percentage of denatured protein population and associated activity loss, in the case of ß-galactosidase, was determined to range from 2 to 10% depending on the air-flow rate of the spraying process.
Assuntos
Lactoferrina , Água , Animais , Bovinos , Liofilização/métodos , Imunoglobulina G , Tamanho da Partícula , Pós/química , Água/química , beta-GalactosidaseRESUMO
Thin-film freeze-drying (TFFD) is a rapid freezing and then drying technique used to prepare inhalable dry powders from the liquid form for applications such as drug delivery to the lungs. Herein we report the preparation of aerosolizable dry powders of monoclonal antibodies (mAbs) by TFFD. We first formulated an IgG antibody with lactose/leucine (60:40, w/w) or trehalose/leucine (75:25) and tested their aerosol performance. The IgG 1% (w/w) formulated with lactose/leucine (60:40, w/w) in phosphate buffered saline (PBS) (IgG-1-LL-PBS) and processed by TFFD was found to produce the powder with desirable aerosol properties. We then replaced the IgG with anti-programmed cell death protein (anti-PD-1 mAb), a specific antibody, to prepare a dry powder (anti-PD1-1-LL-PBS), which performed similarly to the IgG-1-LL-PBS powder. The aerosol properties of the anti-PD1-1-LL-PBS dry powder were significantly better when TFFD was used to prepare the powder than when conventional shelf freeze-drying (shelf FD) was used. The TFFD dry powder had a porous structure with nanoaggregates and had a Tg value between 39 and 50 °C. When stored at room temperature, the anti-PD-1 mAb in the TFFD powder was more stable than that of the same formulation stored as a liquid. The addition of polyvinylpyrrolidone K40 in the formulation raised the Tg to 152 °C, which is expected to further increase the storage stability of the mAbs. The PD-1 binding activity of the anti-PD-1 mAbs after TFFD was not different from before TFFD. While protein loss, likely due to protein binding to vials and the thin-film freezing apparatus, was identified, we were able to minimize the loss by increasing the mAb concentration (i.e., from 1% to 13.2%). Micro-flow imaging revealed that the excipients and PBS affected subvisible aggregate formation. More subvisible mAb aggregates were generated when PBS was used, but the mAb content in the dry powders did not significantly affect the total subvisible aggregate count. Powders prepared with mannitol as an excipient showed the least amount of subvisible mAb aggregates. Finally, we showed that anti-TNF-α, another mAb, can also be converted to a dry powder with a similar composition by TFFD. We conclude that TFFD can be applied to produce stable, aerosolizable dry powders of mAbs for pulmonary delivery and that formulations must be optimized to maximize aerosol performance and minimize protein aggregation.
Assuntos
Antineoplásicos Imunológicos , Lactose , Administração por Inalação , Aerossóis , Anticorpos Monoclonais , Inaladores de Pó Seco , Excipientes/química , Imunoglobulina G , Leucina , Tamanho da Partícula , Pós , Inibidores do Fator de Necrose TumoralRESUMO
Due to the low and erratic bioavailability of oral tacrolimus (TAC), the long-term survival rate following lung transplantation remained low compared to other solid organs. TAC was reformulated and developed as inhaled formulations by thin film freezing (TFF). Previous studies reported that inhaled TAC combined with 50% w/w lactose (LAC) was safe and effective for the treatment of lung transplant rejection in rodent models. In this study, we aimed to investigate the safety and tolerability of TFF TAC-LAC in human subjects. The formulation can be delivered to the lung as colloidal dispersions after reconstitution and as a dry powder. Healthy subjects inhaled TAC-LAC colloidal dispersions at 3 mg TAC/dose via a vibrating mesh nebulizer in the first stage of this study and TAC-LAC dry powder at 3 mg TAC/dose via a single dose dry powder inhaler in the second stage. Our results demonstrated that oral inhalation of TAC-LAC colloidal dispersions and dry powder exhibited low systemic absorption. Additionally, they were well-tolerated with no changes in CBC, liver, kidney, and lung functions. Only mild adverse side effects (e.g., cough, throat irritation, distaste) were observed. In summary, pulmonary delivery of TFF TAC-LAC would be a safe and promising therapy for lung transplant recipients.
RESUMO
In this work, we have developed and tested a dry powder form of niclosamide made by thin-film freezing (TFF) and administered it by inhalation to rats and hamsters to gather data about its toxicology and pharmacokinetics. Niclosamide, a poorly water-soluble drug, is an interesting drug candidate because it was approved over 60 years ago for use as an anthelmintic medication, but recent studies demonstrated its potential as a broad-spectrum antiviral with pharmacological effect against SARS-CoV-2 infection. TFF was used to develop a niclosamide inhalation powder composition that exhibited acceptable aerosol performance with a fine particle fraction (FPF) of 86.0% and a mass median aerodynamic diameter (MMAD) and geometric standard deviation (GSD) of 1.11 µm and 2.84, respectively. This formulation not only proved to be safe after an acute three-day, multi-dose tolerability and exposure study in rats as evidenced by histopathology analysis, and also was able to achieve lung concentrations above the required IC90 levels for at least 24 h after a single administration in a Syrian hamster model. To conclude, we successfully developed a niclosamide dry powder inhalation that overcomes niclosamide's limitation of poor oral bioavailability by targeting the drug directly to the primary site of infection, the lungs.
Assuntos
COVID-19 , Niclosamida , Administração por Inalação , Aerossóis , Animais , Cricetinae , Inaladores de Pó Seco , Congelamento , Humanos , Tamanho da Partícula , Pós , Ratos , SARS-CoV-2RESUMO
Remdesivir dry powder for inhalation was previously developed using thin film freezing (TFF). A single-dose 24-h pharmacokinetic study in hamsters demonstrated that pulmonary delivery of TFF remdesivir can achieve plasma remdesivir and GS-441524 levels higher than the reported EC50s of both remdesivir and GS-441524 (in human epithelial cells) over 20 h. The half-life of GS-4412524 following dry powder insufflation was about 7 h, suggesting the dosing regimen would be twice-daily administration. Although the remdesivir-Captisol® (80/20 w/w) formulation showed faster and greater absorption of remdesivir and GS-4412524 in the lung, remdesivir-leucine (80/20 w/w) exhibited a greater Cmax with shorter Tmax and lower AUC of GS-441524, indicating lower total drug exposure is required to achieve a high effective concentration against SAR-CoV-2. In conclusion, remdesivir dry powder for inhalation would be a promising alternative dosage form for the treatment of COVID-19 disease.
RESUMO
Remdesivir exhibits in vitro activity against SARS-CoV-2 and was granted approval for emergency use. To maximize delivery to the lungs, we formulated remdesivir as a dry powder for inhalation using thin film freezing (TFF). TFF produces brittle matrix nanostructured aggregates that are sheared into respirable low-density microparticles upon aerosolization from a passive dry powder inhaler. In vitro aerodynamic testing demonstrated that drug loading and excipient type affected the aerosol performance of remdesivir. Remdesivir combined with optimal excipients exhibited desirable aerosol performance (up to 93.0% FPF< 5 µm; 0.82 µm mass median aerodynamic diameter). Remdesivir was amorphous after the TFF process, which benefitted drug dissolution in simulated lung fluid. TFF remdesivir formulations are stable after one month of storage at 25 °C/60% relative humidity. An in vivo pharmacokinetic evaluation showed that TFF remdesivir-leucine was poorly absorbed into systemic circulation while TFF remdesivir-Captisol® demonstrated increased systemic uptake compared to leucine. Remdesivir was hydrolyzed to the nucleoside analog GS-441524 in the lung, and levels of GS-441524 were greater in the lung with leucine formulation compared to Captisol®. In conclusion, TFF technology produces high-potency remdesivir dry powder formulations for inhalation that are suitable to treat patients with COVID-19 on an outpatient basis and earlier in the disease course where effective antiviral therapy can reduce related morbidity and mortality.
RESUMO
We investigated the feasibility of preparing high-potency tacrolimus dry powder for inhalation using thin film freezing (TFF). We found that using ultra-rapid freezing can increase drug loading up to 95% while maintaining good aerosol performance. Drug loading affected the specific surface area and moisture sorption of TFF formulations, but it did not affect the chemical stability, physical stability, and dissolution of tacrolimus. Tacrolimus remained amorphous after storage at 40 °C/75% RH, and 25 °C/60% RH for up to 6 months. Lactose functioned as a bulking agent, and it had little to no effect as a stabilizer for amorphous tacrolimus due to a lack of interaction between the drug and excipient. Additionally, the aerosol performance of TFF tacrolimus/lactose (95/5) did not significantly change after six months of storage at 25 °C/60% RH. For processing parameters, the solids content and the processing temperature did not affect the aerosol performance of tacrolimus. Furthermore, both low- and high-resistance RS01 showed optimal and consistent aerosol performance over the 1-4 kPa pressure drop range. In conclusion, TFF is a suitable technology for producing inhalable powder that contain high drug loading and have less flow rate dependence.
Assuntos
Inibidores de Calcineurina/química , Excipientes/química , Lactose/química , Tacrolimo/química , Administração por Inalação , Aerossóis , Inibidores de Calcineurina/administração & dosagem , Química Farmacêutica , Composição de Medicamentos , Liberação Controlada de Fármacos , Estabilidade de Medicamentos , Armazenamento de Medicamentos , Congelamento , Umidade , Pós , Tacrolimo/administração & dosagem , Tecnologia Farmacêutica , TemperaturaRESUMO
BACKGROUND: Effective clinical management of airway clot and fibrinous cast formation of severe inhalational smoke-induced acute lung injury (ISALI) is lacking. Aerosolized delivery of tissue plasminogen activator (tPA) is confounded by airway bleeding; single-chain urokinase plasminogen activator (scuPA) moderated this adverse effect and supported transient improvement in gas exchange and lung mechanics. However, neither aerosolized plasminogen activator (PA) yielded durable improvements in physiologic responses or reduction in cast burden. Here, we hypothesized that perfluorochemical (PFC) liquids would facilitate PA distribution and sustain improvements in physiologic outcomes in ISALI. METHODS: Spontaneously breathing adult sheep (n = 36) received anesthesia and analgesia and were instrumented, exposed to cotton smoke inhalation, and supported by mechanical ventilation for 48 h. Groups (n = 6/group) were studied without supplemental treatment, or, starting 4 h post injury, they received intratracheal low volume (8 mL) PFC liquid alone or a dose range of tPA/PFC or scuPA/PFC suspensions (4 or 8 mg in 8 mL PFC) every 8 h. Outcomes were evaluated by sequential measurements of cardiopulmonary parameters, lung histomorphology, and biochemical analyses of bronchoalveolar lavage fluid. RESULTS: Dose-response and PA-type comparisons of outcomes demonstrated sustained superiority with low-volume PFC suspensions of scuPA over tPA or PFC alone, favoring the highest dose of scuPA/PFC suspension over lower doses, without airway bleeding. CONCLUSIONS: We propose that this improved profile over previously reported aerosolized delivery is likely related to improved dose distribution. Sustained salutary responses to scuPA/PFC suspension delivery in this translational model are encouraging and support the possibility that the observed outcomes could be of clinical importance.
RESUMO
This review provides an assessment of post-inhalation cough with therapeutic aerosols. Factors that increase cough may be mitigated through design of the drug, formulation, and device. The incidence of cough is typically less than 5% for drugs with a nominal dose less than 1 mg, including asthma and COPD therapeutics. Cough increases markedly as the dose approaches 100 mg. This is due to changes in the composition of epithelial lining fluid (e.g., increases in osmolality, proton concentration). Whether an individual exhibits cough depends on their degree of sensitization to mechanical and chemical stimuli. Hypersensitivity is increased when the drug, formulation or disease result in increases in lung inflammation. Cough related to changes in epithelial lining fluid composition can be limited by using insoluble neutral forms of drugs and excipients.
Assuntos
Aerossóis/efeitos adversos , Aerossóis/química , Tosse/induzido quimicamente , Composição de Medicamentos/métodos , Administração por Inalação , Relação Dose-Resposta a Droga , Hipersensibilidade a Drogas/fisiopatologia , Humanos , Concentração de Íons de Hidrogênio , Hipersensibilidade , Nebulizadores e Vaporizadores , Concentração OsmolarRESUMO
Counterions commonly remain with peptides in salt form after peptide purification. In animal and human studies, acetate counterions are a safer and more acceptable choice for peptides than others (e.g., trifluoroacetate counterions). Various salt forms of caveolin-1 scaffolding domain (CSP7) affect counterion volatilization. The development of lyophilized formulations containing volatile compounds is a challenge because these compounds sublimate away during the process. This work aims to investigate the effect of excipients and lyophilization parameters on the preservation of volatile compounds after lyophilization. The peak areas obtained from 1H and 19F NMR spectra were used to calculate the molar ratio of counterions to CSP7. We found that the pH modifier excipient had the greatest impact on the loss of counterions. By optimizing the molar ratio of bulking agent to CSP7, volatile compounds can be preserved after lyophilization. Higher chamber pressure during lyophilization can lower the sublimation rate of volatile compounds. Moreover, the loss of volatile compounds affects the stability of CSP7 due to the pH shift of reconstituted solutions, thereby causing peptide aggregation. The optimization of the formulation and processing helps preserve volatile compounds, thus minimizing the pH change of reconstituted solutions and maintaining the stability of peptide.
RESUMO
Single-chain tissue-type plasminogen activator (sctPA) and single-chain urokinase plasminogen activator (scuPA) have attracted interest as enzymes for the treatment of inhalational smoke-induced acute lung injury (ISALI). In this study, the pulmonary delivery of commercial human sctPA and lyophilized scuPA and their reconstituted solution forms were demonstrated using vibrating mesh nebulizers (Aeroneb® Pro (active) and EZ Breathe® (passive)). Both the Aeroneb® Pro and EZ Breathe® vibrating mesh nebulizers produced atomized droplets of protein solution of similar size of less than about 5 µm, which is appropriate for pulmonary delivery. Enzymatic activities of scuPA and of sctPA were determined after nebulization and both remained stable (88.0% and 93.9%). Additionally, the enzymatic activities of sctPA and tcuPA were not significantly affected by excipients, lyophilization or reconstitution conditions. The results of these studies support further development of inhaled formulations of fibrinolysins for delivery to the lungs following smoke-induced acute pulmonary injury.