Acid-catalyzed Transformation of Nitrite to Nitric Oxide on Copper(II)-Cobalt(II) Centers in a Bimetallic Complex.

Nitrite (NO2-) serves as a pool of nitric oxide (NO) in biological systems under hypoxic conditions, and it is transformed to NO by nitrite reductase (NiR) enzyme in the presence of acid. However, NO synthases generate NO in normoxic conditions. Previously, acid-induced NO2- reduction chemistry was modeled on mono-metallic 3d-metals, generating metal-nitrosyls or NO(g) with H2O or H2O2 products. Herein, to understand the relative potency of a bimetallic system, we report the acid-induced reductive conversion of η2-bound NO2- to NO on CuII-CoII centers of a hetero-bimetallic CuII­nitrito-CoII complex, [(LN8H)CuII­NO2-­CoII]3+ (CuII-NO2--CoII, 2) bearing an octadentate N8-cryptand ligand (LN8H). The CuII-NO2--CoII generates [CuII(LN8H)CoII]4+ (1) upon reaction with one equiv. acid (HClO4, H+ ions source) with NO(g) via a presumed transient nitrousacid (ONOH) intermediate species. Likewise, this NO2- reduction was found to form H2O, which is believed to be from the decomposition of H2O2, an intermediate species. In addition, complex 2, in the presence of more than one equiv. H+ ions also showed the formation of NO(g) with H2O. Mechanistic investigations, using 15N-labeled-15NO2-, 18O-labeled-18O14N16O- and 2H-labeled-DClO4 (D+ source), revealed that the N-atom and O-atom in the 14/15NO and 14N18O gases are derived from NO2- ligand and H-atom in H2O derived from H+-source, respectively.

Surface coating induced room-temperature phosphorescence in flexible organic single crystals.

Materials exhibiting room temperature phosphorescence (RTP) are in high demand for signage, information encryption, sensing, and biological imaging. Due to weak spin-orbit coupling and other non-radiative processes that effectively quench the triplet excited states, RTP is sparsely observed in organic materials. Although the incorporation of a heavy atom through covalent or non-covalent modification circumvents these drawbacks, heavy-atom-containing materials are undesirable because of their deleterious side effects. Here, we designed and synthesized a new naphthalidenimine-boron complex as a coating material for the single crystals of 4,4'-dimethoxybenzophenone. The coated surface was observed to exhibit yellowish-green phosphorescence with ms lifetimes at ambient conditions through Förster resonance energy transfer (FRET). Importantly, the mechanical flexibility of the single crystals was observed to be retained after coating. The fluorescence-phosphorescence dual emission was utilised for colour-tunable optical waveguiding and anti-counterfeiting applications. As organic single crystals that can sustain mechanical deformations are emerging as the next-generation materials for electronic device fabrication, the flexible RTP organic crystals showing colour-tuneable optical waveguiding could be omnipotent in electronics.

Multifunctional BODIPY embedded non-woven fabric for CO release and singlet oxygen generation.

Materials that can simultaneously release CO and generate singlet oxygen upon visible light irradiation under ambient conditions are highly desirable for therapeutic applications. Furthermore, materials that can sequester the undesirable side products into the matrix without affecting the release of CO and singlet oxygen generation would allow them to be used for practical applications. Focussing on these aspects, we prepared two dipicolylamine appended BODIPY­manganese(I) tricarbonyl complexes wherein the metal core was systematically tethered at 5- and 8- positions of the BODIPY core. The complexes were embedded into a polymer matrix via electrospinning and the resulting non-woven fabrics showed CO release as well as singlet oxygen generation upon irradiation. While the hybrid materials were non-toxic in dark, they were strongly photocytotoxic to c6 cancer cells when exposed to light. Rapid CO release alongside significant singlet oxygen generation, indefinite dark stability, good biocompatibility and negligible dark toxicity makes these fabrics a potent candidate for phototherapeutic applications.

Isomer Selective Thermosalience and Luminescence Switching in Organic Crystals.

Organic crystals that respond to external stimuli are interesting for the design of smart materials. Here, we show that molecular engineering can transform simple naphthalidenimine-boron complexes─known for their exciting photophysical properties─into functional materials that exhibit thermosalience and thermal-luminescence switching. Detailed crystallographic and spectroscopic investigations revealed the role of subtle molecular parameters in deciphering charge-transfer interactions, which in turn imparted dynamic properties to the crystals. The simultaneous observation of thermally induced jumping and luminescence switching makes these crystals ideal for optoelectronic applications.

A luminescent Zn-MOF for the detection of explosives and development of fingerprints.

A luminescent 3D metal-organic framework [Zn(NDA)(AMP)] = PUC1 (where, NDA = naphthalene-2,6-dicarboxylic acid and AMP = 4-aminomethyl pyridine) was synthesized under solvothermal conditions. The synthesized 3D framework was fully characterized with the help of different analytical techniques such as SCXRD, FTIR, TGA, PXRD, SEM, BET, etc. PUC1 exhibited a strong emission peak at 371 nm when excited at 290 nm and the resulting emission was efficiently quenched in the presence of various organic explosive substances like pentaerythritol tetranitrate (PETN), 2,4,6-trinitrophenyl-N-methylnitramine (Tetryl), trinitrotoluene (TNT), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), and 1,3,5,7-tetranitro-1,3,5,7-tetrazoctane (HMX). PUC1 revealed highly sensitive and selective detection of PETN and Tetryl with high quenching constant values of 0.1 × 106 and 0.12 × 105 M-1 and low detection limits of 0.315 and 0.404 µM respectively. The strong luminescent properties of PUC1 lead to its successful application in the development of latent fingermarks on different non-porous surfaces using the powder dusting method. The accuracy and applicability of the synthesized material were determined by developing fingerprints by using secretions from eccrine and apocrine glands on a glass slide and various other surfaces, followed by dusting the surfaces. The results so obtained were found to be very accurate and promising.

Low catalyst loading enabled organocatalytic synthesis of chiral bis-heterocyclic frameworks containing pyrazole and isoxazole.

The organocatalytic asymmetric synthesis of enantiopure bis-heterocyclic molecules containing pyrazole and isoxazole under mild reaction conditions has been reported via a low-catalyst loading Michael addition reaction of pyrazolyl nitroalkenes with 1,3-dicarbonyl derivatives. 4-Substituted pyrazole derivatives were obtained in 60-87% yields and with 82-97% ee. These pyrazolyl derivatives are further transformed into chiral bis-heterocyclic derivatives in up to 82% yields and up to 99% ee. The synthesized pyrazole and isoxazole based bis-heterocyclic derivatives are potential bio-active molecules expected to have significant applications. Additionally, the synthesis of these bis-heterocycles can efficiently be carried out in one pot without any loss of enantiopurity, which further adds to its significance.

Candida antarctica lipase-B-catalyzed kinetic resolution of 1,3-dialkyl-3-hydroxymethyl oxindoles.

Candida antarctica (CAL-B) lipase-catalyzed resolution of 1,3-dialkyl-3-hydroxymethyl oxindoles has been performed to obtain (R)-1,3-dialkyl-3-acetoxymethyl oxindoles with up to 99% ee and (S)-1,3-dialkyl-3-hydroxymethyl oxindoles with up to 78% ee using vinyl acetate as acylating agent and acetonitrile as solvent transforming (S)-3-allyl-3-hydroxymethyl oxindole to (3S)-1'-benzyl-5-(iodomethyl)-4,5-dihydro-2H-spiro[furan-3,3'-indolin]-2'-one. The optically active 3-substituted-3-hydroxymethyl oxindoles and spiro-oxindoles are among the key synthons in the synthesis of potentially biologically active molecules.

Finding a new pathway for acid-induced nitrite reduction reaction: formation of nitric oxide with hydrogen peroxide.

Here, we report a new pathway for nitrite reduction chemistry, formation of cobalt-nitrosyl ({CoII-NO}8) with H2O2 in the reaction of a CoII-nitrito complex with a one-fold acid (H+) via the formation of a CoII-nitrous acid intermediate ({CoII-ONOH}). Mechanistic investigations using 15N-labeled-15NO2- revealed that the N-atom in the {CoII-NO}8 complex is derived from the nitrito ligand, and H2O2 came from the homolysis of the ON-OH moiety. Spectral evidence supporting the formation of the CoII-ONOH intermediate and the generation of H2O2 is also presented.

A Series of Lanthanide-Based Metal-Organic Frameworks Derived from Furan-2,5-dicarboxylate and Glutarate: Structure-Corroborated Density Functional Theory Study, Magnetocaloric Effect, Slow Relaxation of Magnetization, and Luminescent Properties.

Herein, through a dual-ligand strategy, we report eight isorecticular lanthanide(III) furan-2,5-dicarboxylic acid metal-organic frameworks (Ln-MOFs) with the general formula {[Ln(2,5-FDA)0.5(Glu)(H2O)2]· xH2O} n [Ln = Sm (1), Eu (2), Gd (3), Tb (4), Dy (5), Ho (6), Er (7), and Yb (8); 2,5-FDA2- = furan-2,5-dicarboxylate and Glu2- = glutarate; x = 0.5 for 1, 2, and 4 and x = 0 for 3 and 5-8], synthesized under solvothermal conditions by using an N, N'-dimethylformamide/H2O mixed solvent system. Crystallographic data reveal that all eight Ln-MOFs 1-8 crystallize in the orthorhombic Pnma space group. All of the MOFs are isostructural as well as isomorphous with distorted monocapped square-antiprismatic geometry around the Ln1 metal center. In Ln-MOFs 1-8, the 2,5-FDA2- and Glu2- ligands exhibit µ2-κ4,η1:η1:η1:η1 and µ3-κ5,η2:η1:η1:η1 coordination modes, respectively. Topologically, assembled Ln-MOFs 1-8 consist of the 2D cem topological type. The designed Ln-MOFs 1-8 are further explored for structure-corroborated density functional theory study. Meanwhile, room temperature photoluminescence properties of Ln-MOFs 2 and 4 and magnetic properties of Ln-MOFs 3 and 5 have been explored in detail. A highly intense, ligand-sensitized, Ln3+ f-f photoluminescence emission is exhibited by Ln-MOFs 2 [Eu3+ (red emission)] and 4 [Tb3+ (green emission)]. Magnetic studies suggest weak antiferro- and ferromagnetic interactions between adjacent GdIII ions in Ln-MOF 3, thereby displaying a large magnetocaloric effect. The magnetic data measured at T = 2 K and Δ H = 30 kOe depict that the -Δ Sm value per unit mass reaches 32.1 J kg-1 K-1, which is larger than most of the GdIII-based complexes reported. The alternating-current susceptibility measurements on Ln-MOF 5 revealed that out-of-phase signals are frequency- and temperature-dependent under both 0 and 2 kOe direct-current fields, thereby suggesting a typical slow magnetic relaxation behavior with two relaxation processes. This is further supported by the Cole-Cole plots at 2.4-6 K.

Enantioselective 1,4-Michael addition reaction of pyrazolin-5-one derivatives with 2-enoylpyridines catalyzed by Cinchona derived squaramides.

The bifunctional nature of the cinchonidine squaramides has been successfully employed to catalyze the enantioselective 1,4-Michael addition reaction of pyrazolin-5-ones with 2-enoylpyridines under mild reaction conditions. Through this methodology, a broad range of optically active heterocyclic derivatives bearing both pyrazole and pyridine motifs have been synthesized in yields up to 88% and enantiomeric excess up to 96%.

Colossal positive and negative thermal expansion and thermosalient effect in a pentamorphic organometallic martensite.

The thermosalient effect is an extremely rare propensity of certain crystalline solids for self-actuation by elastic deformation or by a ballistic event. Here we present direct evidence for the driving force behind this impressive crystal motility. Crystals of a prototypical thermosalient material, (phenylazophenyl)palladium hexafluoroacetylacetonate, can switch between five crystal structures (α-ε) that are related by four phase transitions including one thermosalient transition (α↔γ). The mechanical effect is driven by a uniaxial negative expansion that is compensated by unusually large positive axial expansion (260 × 10(-6) K(-1)) with volumetric expansion coefficients (≈250 × 10(-6) K(-1)) that are among the highest values reported in molecular solids thus far. The habit plane advances at ~10(4) times the rate observed with non-thermosalient transitions. This rapid expansion of the crystal following the phase switching is the driving force for occurrence of the thermosalient effect.

Kinematic and mechanical profile of the self-actuation of thermosalient crystal twins of 1,2,4,5-tetrabromobenzene: a molecular crystalline analogue of a bimetallic strip.

A paradigm shift from hard to flexible, organic-based optoelectronics requires fast and reversible mechanical response from actuating materials that are used for conversion of heat or light into mechanical motion. As the limits in the response times of polymer-based actuating materials are reached, which are inherent to the less-than-optimal coupling between the light/heat and mechanical energy in them, a conceptually new approach to mechanical actuation is required to leapfrog the performance of organic actuators. Herein, we explore single crystals of 1,2,4,5-tetrabromobenzene (TBB) as actuating elements and establish relations between their kinematic profile and mechanical properties. Centimeter-size acicular crystals of TBB are the only naturally twinned crystals out of about a dozen known materials that exhibit the thermosalient effect-an extremely rare and visually impressive crystal locomotion. When taken over a phase transition, crystals of this material store mechanical strain and are rapidly self-actuated to sudden jumps to release the internal strain, leaping up to several centimeters. To establish the structural basis for this colossal crystal motility, we investigated the mechanical profile of the crystals from macroscale, in response to externally induced deformation under microscope, to nanoscale, by using nanoindentation. Kinematic analysis based on high-speed recordings of over 200 twinned TBB crystals exposed to directional or nondirectional heating unraveled that the crystal locomotion is a kinematically complex phenomenon that includes at least six kinematic effects. The nanoscale tests confirm the highly elastic nature, with an elastic deformation recovery (60%) that is far superior to those of molecular crystals reported earlier. This property appears to be critical for accumulation of stress required for crystal jumping. Twinned crystals of TBB exposed to moderate directional heating behave as all-organic analogue of a bimetallic strip, where the lattice misfit between the two crystal components drives reversible deformation of the crystal.

Dynamic single crystals: kinematic analysis of photoinduced crystal jumping (the photosalient effect).

Crystals on the move: If they are subjected to a strong light stimulus, crystals of the cobalt coordination compound [Co(NH3)5(NO2)]Cl(NO3) undergo sudden jumps and leap over distances 10(2)-10(5) times their own size to release the strain that accumulates in their interior. The first quantitative kinematic analysis of this phenomenon is reported. The observed effect could be employed for actuation on the macroscopic scale.

Biomimetic crystalline actuators: structure-kinematic aspects of the self-actuation and motility of thermosalient crystals.

While self-actuation and motility are habitual for humans and nonsessile animals, they are hardly intuitive for simple, lifeless, homogeneous objects. Among mechanically responsive materials, the few accidentally discovered examples of crystals that when heated suddenly jump, propelling themselves to distances that can reach thousands of times their own size in less than 1 ms, provide the most impressive display of the conversion of heat into mechanical work. Such thermosalient crystals are biomimetic, nonpolymeric self-actuators par excellence. Yet, due to the exclusivity and incongruity of the phenomenon, as well as because of the unavailability of ready analytical methodology for its characterization, the reasons behind this colossal self-actuation remain unexplained. Aimed at unraveling the mechanistic aspects of the related processes, herein we establish the first systematic assessment of the interplay among the thermodynamic, kinematic, structural, and macroscopic factors driving the thermosalient phenomenon. The collective results are consistent with a latent but very rapid anisotropic unit cell deformation in a two-stage process that ultimately results in crystal explosion, separation of debris, or crystal reshaping. The structural perturbations point to a mechanism similar to phase transitions of the martensitic family.

Alkali earth metal (Ca, Sr, Ba) based thermostable metal-organic frameworks (MOFs) for proton conduction.

Three new alkaline earth metal based MOFs have been synthesized by using 4,4'-sulfobisbenzoic acid (SBBA) and alkaline earth metal salts M(NO(3))(2), M = Ca, Sr, Ba. These MOFs exhibit interesting structural diversity, variable chemical stability as well as proton conductivity.

Helical water chain mediated proton conductivity in homochiral metal-organic frameworks with unprecedented zeolitic unh-topology.

Four new homochiral metal-organic framework (MOF) isomers, [Zn(l-L(Cl))(Cl)](H(2)O)(2) (1), [Zn(l-L(Br))(Br)](H(2)O)(2) (2), [Zn(d-L(Cl))(Cl)](H(2)O)(2) (3), and [Zn(d-L(Br))(Br)](H(2)O)(2) (4) [L = 3-methyl-2-(pyridin-4-ylmethylamino)butanoic acid], have been synthesized by using a derivative of L-/D-valine and Zn(CH(3)COO)(2)·2H(2)O. A three-periodic lattice with a parallel 1D helical channel was formed along the crystallographic c-axis. Molecular rearrangement results in an unprecedented zeolitic unh-topology in 1-4. In each case, two lattice water molecules (one H-bonded to halogen atoms) form a secondary helical continuous water chain inside the molecular helix. MOFs 1 and 2 shows different water adsorption properties and hence different water affinity. The arrangement of water molecules inside the channel was monitored by variable-temperature single-crystal X-ray diffraction, which indicated that MOF 1 has a higher water holding capacity than MOF 2. In MOF 1, water escapes at 80 °C, while in 2 the same happens at a much lower temperature (∼40 °C). All the MOFs reported here shows reversible crystallization by readily reabsorbing moisture. In MOFs 1 and 2, the frameworks are stable after solvent removal, which is confirmed by a single-crystal to single-crystal transformation. MOFs 1 and 3 show high proton conductivity of 4.45 × 10(-5) and 4.42 × 10(-5) S cm(-1), respectively, while 2 and 4 shows zero proton conductivity. The above result is attributed to the fact that MOF 1 has a higher water holding capacity than MOF 2.

Formation of a narrow chiral cavity in bis-copper(ii) complexes of ferrocenylmethyl-l-tyrosine and its interaction with achiral guests.

Earlier we reported the tendency of ferrocenylmethyl substituted amino acids to organize around Cu(ii) in a C(2) symmetry. In this paper we have utilized this property to form a chiral cavity using a l-tyrosine derivative. Structural characterization of [Cu(II)(S-fTyr)(2)(MeCN)(2)] (), where S-fTyr(1-) is ferrocenylmethyl-l-tyrosinate, showed that the alignment of two tyrosine aromatic rings around the fifth coordination site generates a narrow cavity. Structural characterization of [Cu(S-fTyr)(2)(pyrazine)] (), [Cu(S-fTyr)(2)(pyridine)] (), [Cu(S-fTyr)(2)(bpy)] () and [Cu(S-fTyr)(2)(H(2)O)] () revealed that planar heterocyclic N-donors as guests stabilized the cavity, while polar water molecules destroyed it. Electrochemical properties of the complexes showed a shift of Cu(II)/Cu(I) potentials depending on the strength of the guest binding inside the cavity.

Ferrocene substitution in amino acids strengthens the axial binding in Cu(II) complexes and separates the hydrophobic and hydrophilic region in the crystals.

This paper reports on the synthesis, characterization and electrochemical properties of four ferrocenylmethyl substituted L-amino acid ligands and their Cu(II) complexes. Structural characterization of the complexes of L-methionine and L-asparagine derived ligands showed axial coordination of weak thioether and amide respectively to Cu(II). Coordination of the thioether group of L-methionine to copper (2.791 A) is shorter than observed in the electron transfer protein plastocyanin (2.9 A). Methionine thioether does not bind in synthetic Cu(II) complexes. The characterization of bis-complexes (metal : ligand ratio 1 : 2) with L-serine and L-threonine derivatives showed axial coordination of water with a shorter Cu-O bond length compared to that observed in the corresponding amino acid complexes. The structures also revealed separation of the hydrophilic and hydrophobic regions due to amino acid and ferrocene respectively which resulted in the formation of interesting H-bonded networks.