In-Vitro Decidualization With Different Progesterone Concentration: Development of a Hormone-Responsive 3D Endometrial Tissue Using Rat Endometrial Tissues.

Infertility in women is associated with various uterine and ovarian disorders. Treatment strategies for infertility can range from medications to embryo implantation through assisted reproductive technology (ART). ART has enabled considerable progress; however, there is currently no treatment to replace the endometrium itself. Decidualization requires a complex interaction between endometrial tissue and estrogen and progesterone. We aimed to create a three-dimensional endometrial-like tissue model using in-vitro cell sheet engineering with rat endometrium, and culture cells at different progesterone concentrations to mimic local concentrations. Histological and morphological changes revealed that development of the endometrial-like tissue was not proportional to progesterone concentrations in terms of thickness, number of endometrial glands, or area fraction of intimal glands. These results suggest that decidualization may not be commensurate with the local endometrial progesterone concentration. Notably, the number of endometrial glands increased in the high concentration group and compaction occurred, indicating that the endometrial conditions in the high concentration group may be most conducive to increase pregnancy rates. These findings suggest that there may be an "optimal progesterone concentration" for decidualization, application of which may lead to new strategies for improving pregnancy rates in women with infertility.

Titanium Culture Vessel Presenting Temperature Gradation for the Thermotolerance Estimation of Cells.

Hyperthermia can be induced to exploit the thermal intolerance of cancer cells, which is worse than that of normal cells, as a potential noninvasive cancer treatment. To develop an effective hyperthermia treatment, thermal cytotoxicity of cells should be comprehensively investigated. However, to conduct such investigations, the culture temperature must be accurately regulated. We previously reported a culture system in which the culture temperature could be accurately regulated by employing metallic culture vessels. However, appropriate temperature conditions for hyperthermia depend on the cell species. Consequently, several experiments need to be conducted, which is a bottleneck of inducing hyperthermia. Hence, we developed a cell culture system with temperature gradation on a metallic culture surface. Michigan Cancer Foundation-7 cells and normal human dermal fibroblasts were used as cancer and normal cell models, respectively. Normal cells showed stronger thermal tolerance; this was because the novel system immediately exhibited a temperature gradation. Thus, the developed culture system can be used to investigate the optimum thermal conditions for effective hyperthermia treatment. Furthermore, as the reactions of cultured cells can be effectively assessed with the present results, further research involving the thermal stimulation of cells is possible.

Cell-Based Microfluidic Device Utilizing Cell Sheet Technology.

The development of microelectromechanical systems has resulted in the rapid development of polydimethylpolysiloxane (PDMS) microfluidic devices for drug screening models. Various cell functions, such as the response of endothelial cells to fluids, have been elucidated using microfluidic devices. Additionally, organ-on-a-chip systems that include organs that are important for biological circulation, such as the heart, liver, pancreas, kidneys, and brain, have been developed. These organs realize the biological circulation system in a manner that cannot be reproduced by artificial organs; however, the flow channels between the organs are often artificially created by PDMS. In this study, we developed a microfluidic device consisting only of cells, by combining cell sheet technology with microtitanium wires. Microwires were placed between stacked fibroblast cell sheets, and the cell sheets adhered to each other, after which the microwires were removed leaving a luminal structure with a size approximately equal to the arteriolar size. The lumen structure was constructed using wires with diameters of 50, 100, 150, and 200 µm, which were approximations of the arteriole diameters. Furthermore, using a perfusion device, we successfully perfused the luminal structure created inside the cell sheets. The results revealed that a culture solution can be supplied to a cell sheet with a very high cell density. The biofabrication technology proposed in this study can contribute to the development of organ-on-a-chip systems.

Production of scaffold-free cell-based meat using cell sheet technology.

In the production of cell-based meat, it is desirable to reduce animal-derived materials as much as possible to meet the challenges of sustainability. Here, we demonstrate the "cell sheet-based meat": scaffold-free cell-based meat using cell sheet technology and characterize its texture and nutrients. Bovine myoblast cell sheets were prepared using temperature-responsive culture dishes (TRCDs) and 10 stacked cell sheets to fabricate three-dimensional tissue of 1.3-2.7 mm thickness. Hardness was increased by incubation on the TRCD and was further increased by boiling as is characteristic of natural meat. The wet weight percentage of total protein in the cell sheet was about half that of beef. In this method, large-sized items of cell sheet-based meat were also created by simply scaling up the TRCD. This method promises an environment-friendly food product.

In vitro ballooned hepatocytes can be produced by primary human hepatocytes and hepatic stellate cell sheets.

Despite the increasing prevalence of Nonalcoholic steatohepatitis (NASH) worldwide, there is no effective treatment available for this disease. "Ballooned hepatocyte" is a characteristic finding in NASH and is correlated with disease prognosis, but their mechanisms of action are poorly understood; furthermore, neither animal nor in vitro models of NASH have been able to adequately represent ballooned hepatocytes. Herein, we engineered cell sheets to develop a new in vitro model of ballooned hepatocytes. Primary human hepatocytes (PHH) and Hepatic stellate cells (HSC) were co-cultured to produce cell sheets, which were cultured in glucose and lipid containing medium, following which histological and functional analyses were performed. Histological findings showed hepatocyte ballooning, accumulation of fat droplets, abnormal cytokeratin arrangement, and the presence of Mallory-Denk bodies and abnormal organelles. These findings are similar to those of ballooned hepatocytes in human NASH. Functional analysis showed elevated levels of TGFß-1, SHH, and p62, but not TNF-α, IL-8. Exposure of PHH/HSC sheets to a glucolipotoxicity environment induces ballooned hepatocyte without inflammation. Moreover, fibrosis is an important mechanism underlying ballooned hepatocytes and could be the basis for the development of a new in vitro NASH model with ballooned hepatocytes.

Perfusable vascular tree like construction in 3D cell-dense tissues using artificial vascular bed.

Perfusable vascular structures in cell-dense tissues are essential for fabricating functional three-dimensional (3D) tissues in vitro. However, it is challenging to introduce functional vascular networks observable as vascular tree, finely spaced at intervals of tens of micrometers as in living tissues, into a 3D cell-dense tissue. Herein, we propose a method for introducing numerous vascular networks that can be perfused with blood into 3D tissues constructed by cell sheet engineering. We devise an artificial vascular bed using a hydrogel that is barely deformed by cells, enabling perfusion of the culture medium directly beneath the cell sheets. Triple-layered cell sheets with an endothelial cell network prepared by fibroblast co-culture are transplanted onto the vascular bed and subjected to perfusion culture. We demonstrate that numerous vascular networks are formed with luminal structures in the cell sheets and can be perfused with India ink or blood after a five-day perfusion culture. Histological analysis also demonstrates that perfusable vascular structures are constructed at least 100 µm intervals uniformly and densely within the tissues. The results suggest that our perfusion culture method enhances vascularization within the 3D cell-dense tissues and enables the introduction of functional vasculature macroscopically observable as vascular tree in vitro. In conclusion, this technology can be used to fabricate functional tissues and organs for regenerative therapies and in vitro experimental models.

Bioengineering of a scaffold-less three-dimensional tissue using net mould.

Tissue engineering has attracted attention worldwide because of its application in regenerative medicine, drug screening, and cultured meat. Numerous biofabrication techniques for producing tissues have been developed, including various scaffold and printing methods. Here, we have proposed a novel tissue engineering method using a net metal mould without the use of a scaffold. Briefly, normal human dermal fibroblasts seeded on a dimple plate were subjected to static culture technique for several days to form spheroids. Spheroids of diameter ⩾200µm were poured into a net-shaped mould of gap ⩽100µm and subjected to shake-cultivation for several weeks, facilitating their fusion to form a three-dimensional (3D) tissue. Through this study, we successfully constructed a scaffold-free 3D tissue having strength that can be easily manipulated, which was difficult to construct using conventional tissue engineering methods. We also investigated the viability of the 3D tissue and found that the condition of the tissues was completely different depending on the culture media used. Collectively, this method allows scaffold-free culture of 3D tissues of unprecedented thickness, and may contribute largely to next-generation tissue engineering products.

Perfusable System Using Porous Collagen Gel Scaffold Actively Provides Fresh Culture Media to a Cultured 3D Tissue.

Culturing three-dimensional (3D) tissues with an appropriate microenvironment is a critical and fundamental technology in broad areas of cutting-edge bioengineering research. In addition, many technologies have engineered tissue functions. However, an effective system for transporting nutrients, waste, or oxygen to affect the functions of cell tissues has not been reported. In this study, we introduce a novel system that employs diffusion and convection to enhance transportation. To demonstrate the concept of the proposed system, three layers of normal human dermal fibroblast cell sheets are used as a model tissue, which is cultured on a general dish or porous collagen scaffold with perfusable channels for three days with and without the perfusion of culture media in the scaffold. The results show that the viability of the cell tissue was improved by the developed system. Furthermore, glucose consumption, lactate production, and oxygen transport to the tissues were increased, which might improve the viability of tissues. However, mechanical stress in the proposed system did not cause damage or unintentional functional changes in the cultured tissue. We believe that the introduced culturing system potentially suggests a novel standard for 3D cell cultures.

Functional Analysis of Induced Human Ballooned Hepatocytes in a Cell Sheet-Based Three Dimensional Model.

BACKGROUND: Ballooned hepatocytes (BH) are a key histological hallmark of nonalcoholic steatohepatitis (NASH), yet their consequences for liver-specific functions are unknown. METHODS: In our previous study, an experimental model of human induced-BHs (iBH) has been successfully developed based on cell sheet technology. This study aimed to determine the functions of iBHs in the primary human hepatocyte/normal human dermal fibroblast (PHH/NHDF) co-culture cell sheets. Normal hepatocytes in the PHH/3T3-J2 co-culture cell sheets were set as a control, since 3T3-J2 murine embryonic fibroblasts have exhibited previously long term maintenance of PHH functions. RESULTS: It was found that, albumin secretion was not affected in iBHs, but urea synthesis as well as cytochrome P450 enzyme (CYP) activities including CYP1A2 and CYP3A4, were significantly reduced in iBHs. Besides, loss of bile canaliculi was observed in iBHs. These findings are consistent with clinical studies of human NASH. In addition, PHH/NHDF cell sheets demonstrated two fold higher TGF-ß1 secretion compared with PHH/3T3-J2 cell sheets. Furthermore, treatment with a TGF-ß inhibitor and a semi-synthetic bile acid analogue (obeticholic acid, phase 3 trial of NASH therapy) ameliorated the histological appearance of established iBHs. CONCLUSION: In summary, this study demonstrates the priority of iBHs in recapitulating not only histology but also clinically relevant hepatic dysfunctions in human NASH and suggests TGF-ß and bile acid related signal pathway may play important roles in the formation of iBHs.

Measuring the Contractile Force of Multilayered Human Cardiac Cell Sheets.

Three-dimensional (3D) cardiac tissue reconstruction using tissue engineering technology is a rapidly growing area of regenerative medicine and drug screening development. However, there remains an urgent need for the development of a method capable of accurately measuring the contractile force of physiologically relevant 3D myocardial tissues to facilitate the prediction of human heart tissue drug sensitivity. To this end, our laboratory has developed a novel drug screening model that measures the contractile force of cardiac cell sheets prepared using temperature-responsive culture dishes. To circumvent the difficulties that commonly arise during the stacking of cardiomyocyte sheets, we established a stacking method using centrifugal force, making it possible to measure 3D myocardial tissue. Human induced pluripotent stem cell-derived cardiomyocytes were seeded in a temperature-responsive culture dish and processed into a sheet. The cardiac cell sheets were multilayered to construct 3D cardiac tissue. Measurement of the contractile force and cross-sectional area of the multilayered 3D cardiac tissue were then obtained and used to determine the relationship between the cross-sectional area of the cardiac tissue and its contractile force. The contractile force of the 1-, 3-, and 5-layer tissues increased linearly in proportion to the cross-sectional area. A result of 6.4 mN/mm2, accounting for one-seventh of the contractile force found in adult tissue, was obtained. However, with 7-layer tissues, there was a sudden drop in the contractile force, possibly because of limited oxygen and nutrient supply. In conclusion, we established a method wherein the thickness of the cell sheets was controlled through layering, thus enabling accurate evaluation of the cardiac contractile function. This method may enable comparisons with living heart tissue while providing information applicable to regenerative medicine and drug screening models.

In Vitro Production of Human Ballooned Hepatocytes in a Cell Sheet-based Three-dimensional Model.

Ballooned hepatocytes (BH) are enlarged, abnormal hepatocytes, which are usually involved in liver diseases, in particular, nonalcoholic steatohepatitis (NASH). However, formation of BHs in vitro has been seldom reported. This study reported an in vitro strategy to produce human BHs in a cell sheet-based three-dimensional (3D) model where primary human hepatocytes were cocultured with normal human dermal fibroblasts. Enlargement of hepatocytes (2.3 times larger than normal, p < 0.01), loss of cytoplasmic keratin, appearance of Mallory-Denk bodies (MDBs), and abundant fat droplets accumulation were observed after only a few days culture. Additionally, ultrastructural characteristic findings of BHs in human NASH, including enlarged mitochondria with crystalline inclusions, dilated endoplasmic reticulum, and MDBs formation were also observed in the 3D model. Furthermore, pathophysiological features of human NASH, such as increased secretion of sonic hedgehog ligands and myofibroblast activation were found. This study reports in vitro production of human BHs by using a cell sheet-based 3D model. Similar histological, ultrastructural, and pathophysiological features to human NASH are discovered in this model. This model may facilitate study of BHs and increase our knowledge of the pathogenesis of human liver diseases. Impact Statement Human ballooned hepatocytes (BH), which are present in nonalcoholic steatohepatitis (NASH) are mainly studied based on human liver biopsies and animal models. In this study, human BHs can be successfully reproduced in a cell sheet-based in vitro model, which, as far as we know, is the first in vitro model that recapitulates so many histological and ultrastructural hallmarks of BHs found in human NASH. Additionally, this study also demonstrated presence of some NASH pathophysiological features. This model may facilitate the study of hepatocellular ballooning and prove beneficial in translational preclinical drug discovery in NASH.

Microfluidic vascular-bed devices for vascularized 3D tissue engineering: tissue engineering on a chip.

In this report, we describe a microfluidic vascular-bed (micro-VB) device providing a platform for 3D tissue engineering with vascular network formation. The micro-VB device allows functional connections between endothelial capillaries of heterogeneous sections (5-100 µm in diameter) and artificial plastic tubes or reservoirs (1-10 mm in diameter). Moreover, the micro-VB device can be installed in a standard 100 mm-diameter Petri dish. Endothelial networks in 3D engineered tissues were obtained by cellular self-assembly on the device, after co-culturing of human umbilical vein endothelial cells (HUVECs) and normal human dermal fibroblasts (NHDFs) in fibrin gel. Endothelial capillary connection between vascularized tissues and microfluidic channels, mimicking arteries and veins, was confirmed by perfusion of fluorescent microspheres. The micro-VB devices were compatible with the use of commercially available culture dishes and did not require the involvement of additional equipment. Thus, these micro-VB devices are expected to substantially improve the routine application of 3D tissue engineering to regenerative medicine.

Pulsatile tubular cardiac tissues fabricated by wrapping human iPS cells-derived cardiomyocyte sheets.

The purpose of this study was to fabricate pulsatile tubular cardiac tissue using cell sheet based-tissue engineering. First, we fabricated human induced pluripotent stem cell (hiPSc)-derived cardiomyocyte sheets and normal human dermal fibroblast (NHDF) sheets which are harvested from temperature responsive culture dishes only by lowering the temperature. Then tubular cardiac tissues are formed by wrapping one hiPSc-derived cardiomyocyte sheet and three NHDF sheets around an octagonal column, and both ends of the tubular tissue were covered with fibrin and collagen gel. The octagonal column with the tubular tissue was connected to an in vitro circulation system in a culture box. After four-day culture, the cardiac tissue survived and pulsated spontaneously in the circulation system. Furthermore, the analysis with a Millar catheter inserted into the cardiac tubes revealed significant inner pressure changes generated by their beating. In addition, the tubular cardiac tissue pulsated in response to the electrical stimulation. Although histological analyses demonstrated that cardiac troponin T-positive cells stratified the inner surface of the tubular tissues, gene expression analyses showed an immature state of these cardiomyocytes. Thus, cell sheet-based tissue engineering realized human pulsatile tubular cardiac tissue fabrication and we believe that these tubular cardiac tissues should contribute to future drug screening and regenerative therapy for heart diseases.

Adequate taylor couette flow-mediated shear stress is useful for dissociating human iPS cell-derived cell aggregates.

Pluripotent stem cell including induced pluripotent stem cells (iPSC) are promising cell sources for regenerative medicine and for three-dimensional suspension culture technologies which may enable the generation of robust numbers of desired cells through cell aggregation. Although manual procedure is widely used for dissociating cell aggregates, the development of non-manual procedures using devices will contribute to efficient cell manufacturing. In the present study, we developed novel cell aggregate dissociation devices with a rotating cylinder inside based on taylor couette flow-mediated shear stress. The shear stress can be increased according to an increase in the size of the rotating cylinder inside the devices and the rotation rate. Adequate device size and suitable rotation rate efficiently dissociated cell aggregates after the undifferentiated expansion and the cardiac differentiation of human iPSC. These finding suggest that non-manual device procedure might be useful for harvesting single cells from human iPSC-derived cell aggregates.

Low-temperature culturing improves survival rate of tissue-engineered cardiac cell sheets.

Assembling three-dimensional (3D) tissues from single cells necessitates the use of various advanced technological methods because higher-density tissues require numerous complex capillary structures to supply sufficient oxygen and nutrients. Accordingly, creating healthy culture conditions to support 3D cardiac tissues requires an appropriate balance between the supplied nutrients and cell metabolism. The objective of this study was to develop a simple and efficient method for low-temperature cultivation (< 37 °C) that decreases cell metabolism for facilitating the buildup of 3D cardiac tissues. We created 3D cardiac tissues using cell sheet technology and analyzed the viability of the cardiac cells in low-temperature environments. To determine a method that would allow thicker 3D tissues to survive, we investigated the cardiac tissue viability under low-temperature culture processes at 20-33.5 °C and compared it with the viability under the standard culture process at 37 °C. Our results indicated that the standard culture process at 37 °C was unable to support higher-density myocardial tissue; however, low-temperature culture conditions maintained dense myocardial tissue and prevascularization. To investigate the efficiency of transplantation, layered cell sheets produced by the low-temperature culture process were also transplanted under the skin of nude rats. Cardiac tissue cultured at 30 °C developed denser prevascular networks than the tissue cultured at the standard temperature. Our novel findings indicate that the low-temperature process is effective for fabricating 3D tissues from high-functioning cells such as heart cells. This method should make major contributions to future clinical applications and to the field of organ engineering.

The potential of cell sheet technique on the development of hepatocellular carcinoma in rat models.

BACKGROUND: Hepatocellular carcinoma (HCC) is considered the 3rd leading cause of death by cancer worldwide with the majority of patients were diagnosed in the late stages. Currently, there is no effective therapy. The selection of an animal model that mimics human cancer is essential for the identification of prognostic/predictive markers, candidate genes underlying cancer induction and the examination of factors that may influence the response of cancers to therapeutic agents and regimens. In this study, we developed a HCC nude rat models using cell sheet and examined the effect of human stromal cells (SCs) on the development of the HCC model and on different liver parameters such as albumin and urea. METHODS: Transplanted cell sheet for HCC rat models was fabricated using thermo-responsive culture dishes. The effect of human umbilical cord mesenchymal stromal cells (UC-MSCs) and human bone marrow mesenchymal stromal cells (BM-MSCs) on the developed tumour was tested. Furthermore, development of tumour and detection of the liver parameter was studied. Additionally, angiogenesis assay was performed using Matrigel. RESULTS: HepG2 cells requires five days to form a complete cell sheet while HepG2 co-cultured with UC-MSCs or BM-MSCs took only three days. The tumour developed within 4 weeks after transplantation of the HCC sheet on the liver of nude rats. Both UC-MSCs and BM-MSCs improved the secretion of liver parameters by increasing the secretion of albumin and urea. Comparatively, the UC-MSCs were more effective than BM-MSCs, but unlike BM-MSCs, UC-MSCs prevented liver tumour formation and the tube formation of HCC. CONCLUSIONS: Since this is a novel study to induce liver tumour in rats using hepatocellular carcinoma sheet and stromal cells, the data obtained suggest that cell sheet is a fast and easy technique to develop HCC models as well as UC-MSCs have therapeutic potential for liver diseases. Additionally, the data procured indicates that stromal cells enhanced the fabrication of HepG2 cell sheets. This provides the foundation for future research using stromal cells in preclinical and clinical investigations.

Thicker three-dimensional tissue from a "symbiotic recycling system" combining mammalian cells and algae.

In this paper, we report an in vitro co-culture system that combines mammalian cells and algae, Chlorococcum littorale, to create a three-dimensional (3-D) tissue. While the C2C12 mouse myoblasts and rat cardiac cells consumed oxygen actively, intense oxygen production was accounted for by the algae even in the co-culture system. Although cell metabolism within thicker cardiac cell-layered tissues showed anaerobic respiration, the introduction of innovative co-cultivation partially changed the metabolism to aerobic respiration. Moreover, the amount of glucose consumption and lactate production in the cardiac tissues and the amount of ammonia in the culture media decreased significantly when co-cultivated with algae. In the cardiac tissues devoid of algae, delamination was observed histologically, and the release of creatine kinase (CK) from the tissues showed severe cardiac cell damage. On the other hand, the layered cell tissues with algae were observed to be in a good histological condition, with less than one-fifth decline in CK release. The co-cultivation with algae improved the culture condition of the thicker tissues, resulting in the formation of 160 µm-thick cardiac tissues. Thus, the present study proposes the possibility of creating an in vitro "symbiotic recycling system" composed of mammalian cells and algae.

Optical coherence microscopy of living cells and bioengineered tissue dynamics in high-resolution cross-section.

Optical coherence tomography (OCT) is a valuable tool in the cross-sectional observation/analysis of three-dimensional (3-D) biological tissues, and that histological observation is important clinically. However, the resolution of the technology is approximately 10-20 µm. In this study, optical coherence microscopy (OCM), a tomographic system combining OCT technology with a microscopic technique, was constructed for observing cells individually with a resolution at the submicrometer level. Cells and 3-D tissues fabricated by cell sheet technology were observed by OCM. Importantly, the cell nuclei and cytoplasm could be clearly distinguished, and the time-dependent dynamics of cell-sheet tissues could be observed in detail. Additionally, the 3-D migration of cells in the bioengineered tissue was also detected using OCM and metal-labeled cells. Bovine aortic endothelial cells, but not NIH3T3 murine embryonic skin fibroblasts, actively migrated within the 3-D tissues. This study showed that the OCM system would be a valuable tool in the fields of cell biology, tissue engineering, and regenerative medicine. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 105B: 481-488, 2017.

Controlling shape and position of vascular formation in engineered tissues by arbitrary assembly of endothelial cells.

Cellular self-assembly based on cell-to-cell communication is a well-known tissue organizing process in living bodies. Hence, integrating cellular self-assembly processes into tissue engineering is a promising approach to fabricate well-organized functional tissues. In this research, we investigated the capability of endothelial cells (ECs) to control shape and position of vascular formation using arbitral-assembling techniques in three-dimensional engineered tissues. To quantify the degree of migration of ECs in endothelial network formation, image correlation analysis was conducted. Positive correlation between the original positions of arbitrarily assembled ECs and the positions of formed endothelial networks indicated the potential for controlling shape and position of vascular formations in engineered tissues. To demonstrate the feasibility of controlling vascular formations, engineered tissues with vascular networks in triangle and circle patterns were made. The technique reported here employs cellular self-assembly for tissue engineering and is expected to provide fundamental beneficial methods to supply various functional tissues for drug screening and regenerative medicine.

Time Course of Cell Sheet Adhesion to Porcine Heart Tissue after Transplantation.

Multilayered cell sheets have been produced from bone marrow-derived mesenchymal stem cells (MSCs) for investigating their adhesion properties onto native porcine heart tissue. Once MSCs reached confluence after a 7-day culture on a temperature-responsive culture dish, a MSCs monolayer spontaneously detached itself from the dish, when the culture temperature was reduced from 37 to 20°C. The basal extracellular matrix (ECM) proteins of the single cell sheet are preserved, because this technique requires no proteolytic enzymes for harvesting cell sheet, which become a basic building block for assembling a multilayer cell sheet. The thickness of multilayered cell sheets made from three MSC sheets was found to be approximately 60 µm. For investigating the adhesion properties of the basal and apical sides, the multilayered cell sheets were transplanted onto the surface of the heart's left ventricle. Multilayered cell sheets were histological investigated at 15, 30, 45 and 60 minutes after transplantation by hematoxylin eosin (HE) and azan dyes to determine required time for the adhesion of the multilayered sheets following cell-sheet transplantation. The results showed that only the basal side of multilayered cell sheets significantly enhanced the sheets adhesion onto the surface of heart 30 minutes after transplantation. This study concluded that (1) cell sheets had to be transplanted with its basal side onto the surface of heart tissue and (2) at least 30 minutes were necessary for obtaining the histological adhesion of the sheets to the heart tissue. This study provided clinical evidence and parameters for the successful application of MSC sheets to the myocardium and allowed cell sheet technology to be adapted clinical cell-therapy for myocardial diseases.