High-throughput and high-resolution powder X-ray diffractometer consisting of six sets of 2D CdTe detectors with variable sample-to-detector distance and innovative automation system.

The demand for powder X-ray diffraction analysis continues to increase in a variety of scientific fields, as the excellent beam quality of high-brightness synchrotron light sources enables the acquisition of high-quality measurement data with high intensity and angular resolution. Synchrotron powder diffraction has enabled the rapid measurement of many samples and various in situ/operando experiments in nonambient sample environments. To meet the demands for even higher throughput measurements using high-energy X-rays at SPring-8, a high-throughput and high-resolution powder diffraction system has been developed. This system is combined with six sets of two-dimensional (2D) CdTe detectors for high-energy X-rays, and various automation systems, including a system for automatic switching among large sample environmental equipment, have been developed in the third experimental hutch of the insertion device beamline BL13XU at SPring-8. In this diffractometer system, high-brilliance and high-energy X-rays ranging from 16 to 72 keV are available. The powder diffraction data measured under ambient and various nonambient conditions can be analysed using Rietveld refinement and the pair distribution function. Using the 2D CdTe detectors with variable sample-to-detector distance, three types of scan modes have been established: standard, single-step and high-resolution. A major feature is the ability to measure a whole powder pattern with millisecond resolution. Equally important, this system can measure powder diffraction data with high Q exceeding 30 Å-1 within several tens of seconds. This capability is expected to contribute significantly to new research avenues using machine learning and artificial intelligence by utilizing the large amount of data obtained from high-throughput measurements.

First synthesis of RuSn solid-solution alloy nanoparticles and their enhanced hydrogen evolution reaction activity.

Solid-solution alloys based on platinum group metals and p-block metals have attracted much attention due to their promising potential as materials with a continuously fine-tunable electronic structure. Here, we report on the first synthesis of novel solid-solution RuSn alloy nanoparticles (NPs) by electrochemical cyclic voltammetry sweeping of RuSn@SnOx NPs. High-angle annular dark-field scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy maps confirmed the random and homogeneous distribution of Ru and Sn elements in the alloy NPs. Compared with monometallic Ru NPs, the RuSn alloy NPs showed improved hydrogen evolution reaction (HER) performance. The overpotentials of Ru0.94Sn0.06 NPs/C and Ru0.87Sn0.13 NPs/C to achieve a current density of 10 mA cm-2 were 43.41 and 33.19 mV, respectively, which are lower than those of monometallic Ru NPs/C (53.53 mV) and commercial Pt NPs/C (55.77 mV). The valence-band structures of the NPs investigated by hard X-ray photoelectron spectroscopy demonstrated that the d-band centre of RuSn NPs shifted downward compared with that of Ru NPs. X-ray photoelectron spectroscopy and X-ray absorption near-edge structure analyses indicated that in the RuSn alloy NPs, charge transfer occurs from Sn to Ru, which was considered to result in a downward shift of the d-band centre in RuSn NPs and to regulate the adsorption energy of intermediate Hads effectively, and thus enable the RuSn solid-solution alloy NPs to exhibit excellent HER catalytic properties.

Surface Extraction Process During Initial Oxidation of Pt(111): Effect of Hydrophilic/Hydrophobic Cations in Alkaline Media.

The surface oxidation states of the metal electrodes affect the activity, selectivity, and stability of the electrocatalysts. Oxide formation and reduction on such electrodes must be comprehensively understood to achieve next-generation electrocatalysts with outstanding performance and stability. Herein, the initial electrochemical oxidation of Pt(111) in alkaline media containing hydrophilic and hydrophobic cations is investigated by X-ray crystal truncation rod (CTR) scattering, infrared (IR) spectroscopy, and nanoparticle-based surface-enhanced Raman spectroscopy (SERS). Structural determination using X-ray CTR revealed surface buckling and Pt extraction at the initial stage of surface oxidation, depending on the cationic species. Vibrational spectroscopy is performed to identify the potential- and cation-dependent formation of three oxide species (IR-active OHad, Raman-active OHad/Oad(H2O), and Raman-active Oad). Hydrophilic alkali metal cations (Li+) inhibit surface roughening via irreversible oxide formation. Hydrophilic Li+ can strongly stabilize IR-active OHad, hindering the extraction of Pt surface atoms. Interestingly, bulky hydrophobic cations such as tetramethylammonium (TMA+) cation also reduce the extent of irreversible oxidation despite the absence of IR-active OHad. Hydrophobic TMA+ inhibits the formation of Raman-active OHad/Oad(H2O) associated with Pt extraction. In contrast, the moderate hydrophilicity of K+ has no protective effect against irreversible oxidation. Moderate hydrophilicity enables the coadsorption of Raman-active OHad/Oad(H2O) and Raman-active Oad. The electrostatic repulsion between Raman-active OHad/Oad(H2O) and neighboring Raman-active Oad promotes Pt extraction. These results provide insights into controlling the surface structures of electrocatalysts using cationic species during the oxide formation and reduction processes.

Novel Route for Enhancing Piezoelectricity of Ferroelectric Films: Controlling Nontrivial Polarization States in Pb(Zr, Ti)O3 Monodomain Superlattice Structure.

Artificial superlattice films made of Pb(Zr0.4Ti0.6)O3 and Pb(Zr0.6Ti0.4)O3 were investigated for their polarization states and piezoelectric properties theoretically and experimentally in this study. The developed theory predicts nontrivial polarization along neither [001] nor [111] directions in (111)-epitaxial monodomain superlattice films with uniform compressive strain. Such films were achieved via pulsed laser deposition. When the layer thickness is reduced to 3 nm, d33 becomes 128 ± 3.8 pm/V at 100 kV/cm and 71.3 ± 2.83 pm/V at 600 kV/cm, comparable to that of (111)-oriented Pb(Zr0.4Ti0.6)O3 or Pb(Zr0.6Ti0.4)O3 bulks and clearly exceeding that of the typical clamped films. The measurement agrees with the theoretical analysis, which reveals that the enhanced piezoelectricity is due to rotation of the nontrivial polarization. Furthermore, the theoretical study predicts an even larger d33 exceeding 300 pm/V for specific parameters in superlattice films with uniform tensile strain, which is promising for applications of microelectromechanical systems.

X-ray free electron laser observation of ultrafast lattice behaviour under femtosecond laser-driven shock compression in iron.

Over the past century, understanding the nature of shock compression of condensed matter has been a major topic. About 20 years ago, a femtosecond laser emerged as a new shock-driver. Unlike conventional shock waves, a femtosecond laser-driven shock wave creates unique microstructures in materials. Therefore, the properties of this shock wave may be different from those of conventional shock waves. However, the lattice behaviour under femtosecond laser-driven shock compression has never been elucidated. Here we report the ultrafast lattice behaviour in iron shocked by direct irradiation of a femtosecond laser pulse, diagnosed using X-ray free electron laser diffraction. We found that the initial compression state caused by the femtosecond laser-driven shock wave is the same as that caused by conventional shock waves. We also found, for the first time experimentally, the temporal deviation of peaks of stress and strain waves predicted theoretically. Furthermore, the existence of a plastic wave peak between the stress and strain wave peaks is a new finding that has not been predicted even theoretically. Our findings will open up new avenues for designing novel materials that combine strength and toughness in a trade-off relationship.

Continuous-Flow Chemical Synthesis for Sub-2 nm Ultra-Multielement Alloy Nanoparticles Consisting of Group IV to XV Elements.

Multielement alloy nanoparticles have attracted much attention due to their attractive catalytic properties derived from the multiple interactions of adjacent multielement atoms. However, mixing multiple elements in ultrasmall nanoparticles from a wide range of elements on the periodic table is still challenging because the elements have different properties and miscibility. Herein, we developed a benchtop 4-way flow reactor for chemical synthesis of ultra-multielement alloy (UMEA) nanoparticles composed of d-block and p-block elements. BiCoCuFeGaInIrNiPdPtRhRuSbSnTi 15-element alloy nanoparticles composed of group IV to XV elements were synthesized by sequential injection of metal precursors using the reactor. This methodology realized the formation of UMEA nanoparticles at low temperature (66 °C), resulting in a 1.9 nm ultrasmall average particle size. The UMEA nanoparticles have high durability and activity for electrochemical alcohol oxidation reactions and high tolerance to CO poisoning. These results suggest that the multiple interactions of UMEA efficiently promote the multistep alcohol oxidation reaction.

Interfacial Structure of Pt(110) Electrode during Hydrogen Evolution Reaction in Alkaline Solutions.

In alkaline solutions, interfacial cations affect the hydrogen evolution reaction (HER) activity of platinum electrodes. However, the effects of cations on the HER activity have not been previously investigated based on interfacial structures. In situ surface X-ray diffraction was performed on Pt(110), of which the HER activity is the highest in the low-index planes of Pt, at hydrogen evolution potentials in alkaline solutions, and revealed the interfacial structure of alkali metal cations (Li+ and Cs+). The interfacial structure of the Pt(110) electrode changed reversibly depending on the electrode potential. In the LiOH solution, where the HER activity was higher, the densely packed water layer in the electrical double layer acted as a hydrogen supplier. In the CsOH solution, where the HER activity was lower, the Cs+ cations were aligned in the missing rows of the 1 × 2 reconstructed Pt(110) surface, suggesting that the Cs+ hindered water from accessing the surface, resulting in a lower HER activity.

Continuous-Flow Reactor Synthesis for Homogeneous 1 nm-Sized Extremely Small High-Entropy Alloy Nanoparticles.

High-entropy alloy nanoparticles (HEA NPs) emerged as catalysts with superior performances that are not shown in monometallic catalysts. Although many kinds of synthesis techniques of HEA NPs have been developed recently, synthesizing HEA NPs with ultrasmall particle size and narrow size distribution remains challenging because most of the reported synthesis methods require high temperatures that accelerate particle growth. This work provides a new methodology for the fabrication of ultrasmall and homogeneous HEA NPs using a continuous-flow reactor with a liquid-phase reduction method. We successfully synthesized ultrasmall IrPdPtRhRu HEA NPs (1.32 ± 0.41 nm), theoretically each consisting of approximately 50 atoms. This average size is the smallest ever reported for HEA NPs. All five elements are homogeneously mixed at the atomic level in each particle. The obtained HEA NPs marked a significantly high hydrogen evolution reaction (HER) activity with a very small 6 mV overpotential at 10 mA/cm-2 in acid, which is one-third of the overpotential of commercial Pt/C. In addition, although mass production of HEA NPs is still difficult, this flow synthesis can provide high productivity with high reproducibility, which is more energy efficient and suitable for mass production. Therefore, this study reports the 1 nm-sized HEA NPs with remarkably high HER activity and establishes a platform for the production of ultrasmall and homogeneous HEA NPs.

Compositional dependence of structures and hydrogen evolution reaction activity of platinum-group-metal quinary RuRhPdIrPt alloy nanoparticles.

Platinum-group-metal quinary RuRhPdIrPt alloy nanoparticles were synthesised with compositions slightly away from equimolar, and their crystal and electronic structures were investigated. Their lattice constant changed linearly with composition, while the d-band centre changed nonlinearly. Their catalytic activities for the hydrogen evolution reaction were not correlated with their d-band centre.

Noble-Metal High-Entropy-Alloy Nanoparticles: Atomic-Level Insight into the Electronic Structure.

The compositional space of high-entropy-alloy nanoparticles (HEA NPs) significantly expands the diversity of the materials library. Every atom in HEA NPs has a different elemental coordination environment, which requires knowledge of the local electronic structure at an atomic level. However, such structure has not been disclosed experimentally or theoretically. We synthesized HEA NPs composed of all eight noble-metal-group elements (NM-HEA) for the first time. Their electronic structure was revealed by hard X-ray photoelectron spectroscopy and density function theory calculations with NP models. The NM-HEA NPs have a lower degeneracy in energy level compared with the monometallic NPs, which is a common feature of HEA NPs. The local density of states (LDOS) of every surface atom was first revealed. Some atoms of the same constituent element in HEA NPs have different LDOS profiles, whereas atoms of other elements have similar LDOS profiles. In other words, one atom in HEA loses its elemental identity and it may be possible to create an ideal LDOS by adjusting the neighboring atoms. The tendency of the electronic structure change was shown by supervised learning. The NM-HEA NPs showed 10.8-times higher intrinsic activity for hydrogen evolution reaction than commercial Pt/C, which is one of the best catalysts.

Phase Control of Solid-Solution Nanoparticles beyond the Phase Diagram for Enhanced Catalytic Properties.

The crystal structure, which intrinsically affects the properties of solids, is determined by the constituent elements and composition of solids. Therefore, it cannot be easily controlled beyond the phase diagram because of thermodynamic limitations. Here, we demonstrate the first example of controlling the crystal structures of a solid-solution nanoparticle (NP) entirely without changing its composition and size. We synthesized face-centered cubic (fcc) or hexagonal close-packed (hcp) structured Pd x Ru1-x NPs (x = 0.4, 0.5, and 0.6), although they cannot be synthesized as bulk materials. Crystal-structure control greatly improves the catalytic properties; that is, the hcp-Pd x Ru1-x NPs exceed their fcc counterparts toward the oxygen evolution reaction (OER) in corrosive acid. These NPs only require an overpotential (η) of 200 mV at 10 mA cm-2, can maintain the activity for more than 20 h, greatly outperforming the fcc-Pd0.4Ru0.6 NPs (η = 280 mV, 9 min), and are among the most efficient OER catalysts reported. Synchrotron X-ray-based spectroscopy, atomic-resolution electron microscopy, and density functional theory (DFT) calculations suggest that the enhanced OER performance of hcp-PdRu originates from the high stability against oxidative dissolution.

Tailoring the active site for the oxygen evolution reaction on a Pt electrode.

Highly active electrocatalysts for the oxygen evolution reaction (OER) are essential to improve the efficiency of water electrolysis. The properties of OER active sites on single-crystal Pt electrodes were examined herein. The OER is markedly enhanced by repeated oxidative and reductive potential cycles on the Pt(111) surface. The OER activity on Pt(111) is nine times higher in the third cycle than that before the potential cycles. OER activation by potential cycling depends on the (111) terrace width, with wider (111) terraces significantly enhancing the OER. The oxidation/reduction of the Pt(111) surface produces atomic-sized vacancies on the terraces that activate the OER. Structural analysis using X-ray diffraction reveals that the active sites formed by potential cycling are defects in the second subsurface Pt layer. Potential cycling induces the bowl-shaped roughening of the electrode surface, wherein high-coordination number Pt atoms at the bottom of the cavities activate the OER.

Total x-ray scattering setup for crystalline particles at SPring-8 BL15XU NIMS beamline.

We report a total x-ray scattering (TXS) system for structural analysis of crystalline particle materials at the BL15XU NIMS beamline of SPring-8 in Japan. To achieve a high angular resolution over a high Q region up to 25 Å-1, the TXS system was capable of measuring to 120° at an x-ray energy of 29.02 keV with five CdTe pin detectors. The sample alignment and measuring system were controlled by LabView software. The x-ray pair distribution function (PDF) results for Ni bulk powder and Pt and AgRh nanoparticles were successfully simulated by the PDFgui program. In addition, Rietveld refinement results were also obtained from x-ray diffraction patterns, reflecting long-range order in the Pt nanoparticles. We expect that this TXS system may be useful for understanding structural information of crystalline nanoparticles, including amorphous features at their surface region.

Chemical and Electronic Investigation of Buried NiO1-δ, PCBM, and PTAA/MAPbI3-xClx Interfaces Using Hard X-ray Photoelectron Spectroscopy and Transmission Electron Microscopy.

Identification and profiling of molecular fragments generated over the lifespan of halide perovskite solar cells are needed to overcome the stability issues associated with these devices. Herein, we report the characterization of buried CH3NH3PbI3-xClx (HaP)-transport layer (TL) interfaces. By using hard X-ray photoelectron spectroscopy in conjunction with transmission electron microscopy, we reveal that the chemical decomposition of HaP is TL-dependent. With NiO1-δ, phenyl-C61-butyric acid methyl ester (PCBM), or poly(bis(4-phenyl) (2,4,6-trimethylphenyl)amine) (PTAA) as TLs, probing depth analysis shows that the degradation takes place at the interface (HaP/TL) rather than the HaP bulk area. From core-level data analysis, we identified iodine migration toward the PCBM- and PTAA-TLs. Unexpected diffusion of nitrogen inside NiO1-δ-TL was also found for the HaP/NiO1-δ sample. With a HaP/PCBM junction, HaP is dissociated to PbI2, whereas HaP/PTAA contact favored the formation of CH3I. The low stability of HaP solar cells in the PTAA-TL system is attributed to the formation of CH3I and iodide ion vacancies. Improved stability observed with NiO1-δ-TL is related to weak dissociation of stoichiometric HaP. Here, we provide a new insight to further distinguish different mechanisms of degradation to improve the long-term stability and performance of HaP solar cells.

Strain-Controlled Spin Transition in Heterostructured Metal-Organic Framework Thin Film.

Metal-organic framework (MOF) thin films have recently attracted much attention as a new platform for surface/interface research, where unconventional structural and physical properties emerge. Among the many MOFs as candidates for fabrication of thin films, Hofmann-type MOFs {Fe(pz)[M(CN)4]} [pz = pyrazine; M = Ni (Nipz), M = Pt (Ptpz)] are attractive, because they undergo spin transitions with concomitant structural changes. Here, we demonstrate the first example of a strain-controlled spin transition in heterostructured MOF thin films. The spin transition temperature of Ptpz can be controlled in the temperature range of 300-380 K by fabricating a nanometer-sized heterostructured thin film with a Nipz buffer layer, where the smaller lattice of Nipz causes epitaxial compressive strain to the Ptpz layer. The fabricated heterostructured thin film exhibited a remarkable increase in spin transition temperature with a dynamic structural transformation, confirmed by variable-temperature (VT) X-ray diffraction and VT Raman spectroscopy. By verifying interfacial strain in a heterostructured thin film, we can rationally control the characteristics of MOFs-not only spin transition but also various physical properties such as gas storage, catalysis, sensing, proton conductivity, and electrical properties, among others.

Suppression Mechanisms of the Solid-Electrolyte Interface Formation at the Triple-Phase Interfaces in Thin-Film Li-Ion Batteries.

Side reactions of the charge/discharge in Li-ion batteries (LIBs) generate a solid-electrolyte interface (SEI) onto an electrode surface, resulting in the degradation of the lifetime of a cell. The suppression of SEI formations has attracted much attention for achieving longer cyclable LIBs. Our research group has previously reported that few SEI were observed at triple-phase interfaces (TPIs) consisting of BaTiO3, LiCoO2, and electrolyte interfaces in LIBs with excellent cyclability and ultrahigh-speed chargeability. An investigation on the suppression mechanisms of SEI formations at TPIs should yield important information on understanding the undesirable side reactions. Therefore, we have explored the suppression mechanisms of SEI formations by preparing epitaxial thin films and evaluating the surface of the samples after the electrochemical treatment. The results of X-ray photoelectron spectroscopy and scanning electron microscopy with energy-dispersive X-ray analysis measurements suggested that the decomposition of LiPF6 was suppressed at TPIs, implying that the generation of PF5 via the decomposition of LiPF6 contributed to SEI formation.

Correction: On the electronic structure and hydrogen evolution reaction activity of platinum group metal-based high-entropy-alloy nanoparticles.

[This corrects the article DOI: 10.1039/D0SC02351E.].

Mechanism of Hydrogen Storage and Structural Transformation in Bimetallic Pd-Pt Nanoparticles.

The hydrogen storage capacity of Pd nanoparticles (NPs) decreases as the particles become smaller; however, this reduced capacity is ameliorated by addition of Pt. In the present work, the hydrogen storage mechanism and structural transformations of core (Pd)-shell (Pt) (CS) and solid-solution (SS) NPs during hydrogen absorption and desorption (PHAD) processes are investigated. In situ X-ray absorption spectroscopy measurements were performed to study the evolution of electronic and local structures around Pd and Pt during PHAD. Under ambient conditions, Pd and Pt have distinct local structures. The Pd atomic pairs are more strained in CS NPs than in SS NPs. A similar behavior has been seen in CS NPs after PHAD. The Pd K-edge extended X-ray absorption fine structure data indicate that in CS and SS NPs a substantial fraction of the signal derives from Pd-Pd atomic pairs, indicating that Pd clusters remain present even after PHAD. PHAD causes a rearrangement of the interfacial structure, which becomes homogeneously distributed. The higher coverage of active bimetallic sites results in a higher observed hydrogen storage capacity in the SS phase.

Highly Stable and Active Solid-Solution-Alloy Three-Way Catalyst by Utilizing Configurational-Entropy Effect.

Since 1970, people have been making every endeavor to reduce toxic emissions from automobiles. After the development of a three-way catalyst (TWC) that concurrently converts three harmful gases, carbon monoxide (CO), hydrocarbons (HCs), and nitrogen oxides (NOx ), Rh became an essential element in automobile technology because only Rh works efficiently for catalytic NOx reduction. However, due to the sharp price spike in 2007, numerous efforts have been made to replace Rh in TWCs. Nevertheless, Rh remains irreplaceable, and now, the price of Rh is increasing significantly again. Here, it is demonstrated that PdRuM ternary solid-solution alloy nanoparticles (NPs) exhibit highly durable and active TWC performance, which will result in a significant reduction in catalyst cost compared to Rh. This work provides insights into the design of highly durable and efficient functional alloy NPs, guiding how to best take advantage of the configurational entropy in addition to the mixing enthalpy.

Efficient overall water splitting in acid with anisotropic metal nanosheets.

Water is the only available fossil-free source of hydrogen. Splitting water electrochemically is among the most used techniques, however, it accounts for only 4% of global hydrogen production. One of the reasons is the high cost and low performance of catalysts promoting the oxygen evolution reaction (OER). Here, we report a highly efficient catalyst in acid, that is, solid-solution Ru‒Ir nanosized-coral (RuIr-NC) consisting of 3 nm-thick sheets with only 6 at.% Ir. Among OER catalysts, RuIr-NC shows the highest intrinsic activity and stability. A home-made overall water splitting cell using RuIr-NC as both electrodes can reach 10 mA cm-2geo at 1.485 V for 120 h without noticeable degradation, which outperforms known cells. Operando spectroscopy and atomic-resolution electron microscopy indicate that the high-performance results from the ability of the preferentially exposed {0001} facets to resist the formation of dissolvable metal oxides and to transform ephemeral Ru into a long-lived catalyst.