Organic wastes/by-products as alternative to CO2 for producing mixotrophic microalgae enhancing lipid production.

In this work, white wine lees (WWL), cheese whey (CW), and glycerol (GLY) were used as carbon (C) sources to mixotrophically support the production of the microalga Nannochloropsis salina, replacing CO2 supply. In doing so, the alga was allowed to grow on C sources dosed at 2 g L-1, 3 g L-1, and 4 g L-1 of C, in the presence and absence of CO2 supply. WWL and CW were not able to support the algal growth due to a fungal contamination that was genomically identified, while GLY gave interesting results in particular with 3 g L-1 of C. GLY-C was able to replace CO2-C completely when the latter was omitted, showing an algal biomass production similar to those obtained in autotrophy. If CO2-C was provided jointly with GLY-C, biomass production and lipid contents increased more than 30% and 23%, respectively, compared to autotrophy.

Mixotrophic cultivation of Chlorella for local protein production using agro-food by-products.

A local strain of Chlorella vulgaris was cultivated by using cheese whey (CW), white wine lees (WL) and glycerol (Gly), coming from local agro-industrial activities, as C sources (2.2gCL-1) to support algae production under mixotrophic conditions in Lombardy. In continuous mode, Chlorella increased biomass production compared with autotrophic conditions by 1.5-2 times, with the best results obtained for the CW substrate, i.e. 0.52gL-1d-1 of algal biomass vs. 0.24gL-1d-1 of algal biomass for autotrophic conditions, and protein content for both conditions adopted close to 500gkg-1 DM. Mixotrophic conditions gave a much higher energy recovery efficiency (EF) than autotrophic conditions, i.e. organic carbon energy efficiency (EFoc) of 32% and total energy efficiency (Eft) of 8%, respectively, suggesting the potential for the culture of algae as a sustainable practice to recover efficiently waste-C and a means of local protein production.

Dark fermentation, anaerobic digestion and microbial fuel cells: An integrated system to valorize swine manure and rice bran.

This work describes how dark fermentation (DF), anaerobic digestion (AD) and microbial fuel cells (MFC) and solid-liquid separation can be integrated to co-produce valuable biochemicals (hydrogen and methane), bioelectricity and biofertilizers. Two integrated systems (System 1: AD+MFC, and System 2: DF+AD+MFC) are described and compared to a traditional one-stage AD system in converting a mixture (COD=124±8.1gO2kg(-1)Fresh Matter) of swine manure and rice bran. System 1 gave a biomethane yield of 182 LCH4kg(-1)COD-added, while System 2 gave L yields of bio-hydrogen and bio-methane of 27.3±7.2LH2kg(-1)COD-added and 154±14LCH4kg(-1)COD-added, respectively. A solid-liquid separation (SLS) step was applied to the digested slurry, giving solid and liquid fractions. The liquid fraction was treated via the MFC-steps, showing power densities of 12-13Wm(-3) (500Ω) and average bioelectricity yields of 39.8Whkg(-1)COD to 54.2Whkg(-1)COD.

Mechanical biological treatment of organic fraction of MSW affected dissolved organic matter evolution in simulated landfill.

The aim of this paper was to study the evolution of DOM during 1 year of observation in simulated landfill, of aerobically treated vs. untreated organic fraction of MSW. Results obtained indicated that aerobic treatment of organic fraction of MSW permitted getting good biological stability so that, successive incubation under anaerobic condition in landfill allowed biological process to continue getting a strong reduction of soluble organic matter (DOM) that showed, also, an aromatic character. Incubation of untreated waste gave similar trend, but in this case DOM decreasing was only apparent as inhibition of biological process in landfill did not allow replacing degraded/leached DOM with new material coming from hydrolysis of fresh OM.

Short mechanical biological treatment of municipal solid waste allows landfill impact reduction saving waste energy content.

The aim of this work was to evaluate the effects of full scale MBT process (28 d) in removing inhibition condition for successive biogas (ABP) production in landfill and in reducing total waste impact. For this purpose the organic fraction of MSW was treated in a full-scale MBT plant and successively incubated vs. untreated waste, in simulated landfills for one year. Results showed that untreated landfilled-waste gave a total ABP reduction that was null. On the contrary MBT process reduced ABP of 44%, but successive incubation for one year in landfill gave a total ABP reduction of 86%. This ABP reduction corresponded to a MBT process of 22 weeks length, according to the predictive regression developed for ABP reduction vs. MBT-time. Therefore short MBT allowed reducing landfill impact, preserving energy content (ABP) to be produced successively by bioreactor technology since pre-treatment avoided process inhibition because of partial waste biostabilization.

The use of the dynamic respiration index to predict the potential MSW-leachate impacts after short term mechanical biological treatment.

The aim of this work was to evaluate the effects of short full scale MBT process (28 d) getting a biological stability of DRI < 1000 mg O(2) kg VS(-1) h(-1), on the impact of leachate produced in simulated landfill. As consequence of that, waste was processed by full scale MBT and both untreated and treated waste were successively incubated in simulated landfills for 1 year. Leachates were collected at different incubation times and characterized. Results obtained indicated that MBT allowed waste-organic matter (OM) reduction favoring, also, optimal condition for successive OM degradation in the simulated landfill. Final results indicated a total reduction of leachate impact for the treated waste (DRI of 978 mg O(2)kg VS(-1) h(-1)) with respect to the untreated waste of: -54%, -69%, -77%, -70%, -81% and -16% for NTK, NH(3), TOC, COD, BOD(5) and total heavy metal contents, respectively.

Perspective on the use of humic acids from biomass as natural surfactants for industrial applications.

In the context of renewable vs. non-renewable sources of chemical compounds, the development of natural surfactants as a substitute for synthetic surfactants in technological applications is an important issue. In addition, as synthetic surfactants can persist in the environment causing toxic effects, the use of natural products presents a possibility to minimize impact on the environment. Nowadays, a promising new approach in surfactant-based technologies, consists of the use of humic acids (HAs) extracted directly from biomass that exhibit amphiphilic properties, and can be conveniently used as environmentally friendly surfactants. The raw material from which HAs are extracted and their macromolecular composition affect surfactant properties. Therefore fundamental data from more strictly qualitative aspects, needs to be investigated. This review highlights surfactant ability and chemical properties of HA substances coming from renewable sources in comparison to synthetic surfactants, and points out the capacity for HAs to be used effectively in this field of application.

On-field study of anaerobic digestion full-scale plants (part I): an on-field methodology to determine mass, carbon and nutrients balance.

The mass balance (input/output mass flows) of full-scale anaerobic digestion (AD) processes should be known for a series of purposes, e.g. to understand carbon and nutrients balances, to evaluate the contribution of AD processes to elemental cycles, especially when digestates are applied to agricultural land and to measure the biodegradation yields and the process efficiency. In this paper, three alternative methods were studied, to determine the mass balance in full-scale processes, discussing their reliability and applicability. Through a 1-year survey on three full-scale AD plants and through 38 laboratory-scale batch digesters, the congruency of the considered methods was demonstrated and a linear equation was provided that allows calculating the wet weight losses (WL) from the methane produced (MP) by the plant (WL=41.949*MP+20.853, R(2)=0.950, p<0.01). Additionally, this new tool was used to calculate carbon, nitrogen, phosphorous and potassium balances of the three observed AD plants.

Assessing amendment and fertilizing properties of digestates from anaerobic digestion through a comparative study with digested sludge and compost.

Digestate, with biogas represents the final products of anaerobic digestion (AD). The methane-rich biogas is used to produce electricity and heat, whereas the digestate could be valorized in agriculture. Contrarily to well-recognized biomasses such as digested sludge and compost, the properties of the digestate are not well known and its agricultural use remains unexplored. In this work, a first attempt to study the agronomic properties of digestates was performed by comparing the chemical, spectroscopic, and biological characteristics of digestates with those of compost and digested sludge, used as reference organic matrices. A total of 23 organic matrices were studied, which include eight ingestates and relative digestates, three composts, and four digested sludges. The analytical data obtained was analyzed using principal component analysis to better show in detail similarities or differences between the organic matrices studied. The results showed that digestates differed from ingestates and also from compost, although the starting organic mix influenced the digestate final characteristics. With respect to amendment properties, it seems that biological parameters, more than chemical characteristics, were more important in describing these features. In this way, amendment properties could be ranked as follows: compost≅digestate>digested sludge≫ingestate. As to fertilizer properties, AD allowed getting a final product (digestate) with very good fertilizing properties because of the high nutrient content (N, P, K) in available form. In this way, the digestate appears to be a very good candidate to replace inorganic fertilizers, also contributing, to the short-term soil organic matter turnover.

Nanometer-scale structure of alkali-soluble bio-macromolecules of maize plant residues explains their recalcitrance in soil.

The quantity and quality of plant litter in the soil play an important role in the soil organic matter balance. Besides other pedo-climatic aspects, the content of recalcitrant molecules of plant residues and their chemical composition play a major role in the preservation of plant residues. In this study, we report that intrinsically resistant alkali-soluble bio-macromolecules extracted from maize plant (plant-humic acid) (plant-HA) contribute directly to the soil organic matter (OM) by its addition and conservation in the soil. Furthermore, we also observed that a high syringyl/guaiacyl (S/G) ratio in the lignin residues comprising the plant tissue, which modifies the microscopic structure of the alkali-soluble plant biopolymers, enhances their recalcitrance because of lower accessibility of molecules to degrading enzymes. These results are in agreement with a recent study, which showed that the humic substance of soil consists of a mixture of identifiable biopolymers obtained directly from plant tissues that are added annually by maize plant residues.

Studying soil organic matter using 13C CP-MAS NMR: the effect of soil chemical pre-treatments on spectra quality and representativity.

(13)C CP-MAS NMR spectroscopy is a technique that has proved to be useful in studying soil organic matter (SOM). Nevertheless, NMR spectra exhibit a weak signal and have very low resolution due to: the low natural abundance of (13)C (1.1% of C) in SOM, the generally low SOM content of soils, and the presence of paramagnetic impurities. This paper studies the effects of soil chemical pre-treatments on (13)CP-MAS NMR spectra quality and spectra representativity i.e. soil C mass balance. After chemical pre-treatment to increase total organic carbon (TOC) content and C/Fe ratio, eight soils characterized by different levels of organic carbon content and C/Fe ratios were studied using (13)CP-MAS NMR. Moreover, where chemical treatments were not applicable due to high carbon losses, the number of (13)CP-MAS NMR scans was increased in order to obtain satisfactory spectra. Results show that chemical pre-treatment of soils with C/Fe>1 caused high C losses. Bulk soils were therefore studied by increasing the number of (13)CP-MAS NMR scans. Acceptable spectra were obtained from 8K scans (1K=1024 transient). On the other hand, even when a large number of scan (32K) are used, soil with C/Fe<1 cannot be studied. As these soils are characterized by low C losses after HCl treatments (range of 2.9-25.4%), a pre-treatment of at least 1.39 mol l(-1) HCl removes excess Fe and at the same time increases C/Fe ratio resulting in 32K scans providing good spectra.