Chirality in electromagnetic radiation from relativistic electrons.

Electrons in circular motion emit electromagnetic radiation and lose their energy and angular momentum, both of which are carried away by the radiation field. Electromagnetic radiation from such electrons is not only circularly polarized but also, in general, possessing helical phase structure, the former of which corresponds to spin angular momentum and the latter orbital angular momentum. Based on the classical electrodynamics, we show that the chiral topological property related to the orbital angular momentum arises from deformation of the electromagnetic field due to the relativistic effect.

Exploring the main effects of phoenix dactylifera on destructive changes caused by cyclophosphamide in male reproductive system in mice.

Cyclophosphamide leaves an undesirable effect on testes. This study was conducted to explore the effects of the Phoenix dactylifera (DP) on testes following the cyclophosphamide treatment. Thirty-six male mice were divided into six groups, one control, one cyclophosphamide, two groups of cyclophosphamide with a dose of 200 mg kg-1 and a dose of 400 mg kg-1 DP, and two of only high and low doses of DP. All groups were gavaged daily for 28 days. The animals were euthanized 24 hr after implementing the last treatment. Then, the testes and epididymis samples were removed and weighed. The main sperm characteristics such as the number of sperm and sperm viability, the morphometric changes, biochemical analysis of testes and enzyme activity were investigated. With the cyclophosphamide group, only body weight, testes weight, epididymis weight, sperm viability and the fertilization percentage were decreased significantly compared to the control group. Moreover, the spermatogenesis indices and morphometric parameters in this group indicated a significant decrease. Furthermore, the morphological changes were observed in the testicular tissue, including seminiferous tubule atrophy, vacuolation, hyperemia of blood vessels and increased space in the interstitial tissue. In the biochemical study of cyclophosphamide group, the amount of glutathione peroxidase in serum was decreased, whereas, the amount of malondialdehyde in testicular tissue showed a significant increase. The DP group included the antioxidant and anti-apoptotic properties. It seemed that the compounds in the DP would lead to the inhibition of the production of active metabolites released from the cyclophosphamide.

Curcumin Can be Acts as Effective agent for Prevent or Treatment of Alcohol-induced Toxicity in Hepatocytes: An Illustrated Mechanistic Review.

Previous studies have shown that alcohol abuse can cause serious liver damage and cirrhosis. The main pathway for these types of hepatocellular cell neurodegeneration is mitochondrial dysfunction, which causes lipid peroxidation and dysfunction of the glutathione ring and the defect of antioxidant enzymes in alcoholic hepatic cells. Alcohol can also initiate malicious inflammatory pathways and trigger the initiation and activation of intestinal and extrinsic apoptosis pathways in hepatocellular tissues that lead to cirrhosis. Previous studies have shown that curcumin may inhibit lipid peroxidation, glutathione dysfunction and restore antioxidant enzymes. Curcumin also modulates inflammation and the production of alcohol-induced biomarkers. Curcumin has been shown to play a critical role in the survival of alcoholic hepatocellular tissue. It has been shown that curcumin can induce and trigger mitochondrial biogenesis and, by this mechanism, prevent the occurrence of both intrinsic and extrinsic apoptosis pathways in liver cells that have been impaired by alcohol. According to this mechanism, curcumin may protect hepatocellular tissue from alcohol-induced cell degeneration and may therefore survive alcoholic hepatocellular tissue. . Based on these mechanisms, the protective functions of curcumin against alcohol-induced cell degeneration due to oxidative stress, inflammation, and apoptosis events in hepatocellular tissue have been recorded. Hence, in this research, we have attempted to evaluate and analyze the main contribution mechanism of curcumin cell defense properties against alcohol-induced hepatocellular damage, according to previous experimental and clinical studies, and in this way we report findings from major studies.

Effect of different surface treatment on the repair bond strength of feldspathic porcelain.

BACKGROUND: Considering the use of silane-containing universal adhesives to enhance the repair bond strength of porcelain restorations, a question arises whether the application of these adhesives eliminates the need for a separate application of silane or not. OBJECTIVES: This study aimed to assess the effect of various kinds of surface treatment, including hydrofluoric acid (HF) etching, the application of bis-silane and the use of universal adhesives, on the repair bond strength of feldspathic porcelain. MATERIAL AND METHODS: In this experimental in vitro study, 70 porcelain disks were fabricated and divided into 7 groups (n = 10) for the following types of surface treatment: C (control group) ­ HF etching + silane + Porcelain Bond; HSB ­ HF etching + Single Bond; HSSB ­ HF etching + silane + Single Bond; HAB ­ HF etching + All Bond; HSAB ­ HF etching + silane + All Bond; HFB ­ HF etching + FuturaBond®; and HSFB ­ HF etching + silane + FuturaBond. After applying different kinds of surface treatment, the specimens were light-cured and the Filtek® Z250 composite was bonded to the treated surfaces. The specimens were incubated in distilled water at 37°C for 24 h, and then underwent 5,000 thermal cycles. The repair bond strength of porcelain was measured and the mode of failure was determined under a stereomicroscope. Data was analyzed using the one-way analysis of variance (ANOVA) and Tukey's test. RESULTS: Differences between the groups in the porcelain repair bond strength were significant (p < 0.0001). Bond strength for Single Bond (p < 0.001) and All Bond (p < 0.001) along with silane was significantly higher than for the application of these adhesives without a separate silane application step. This difference was not significant for FuturaBond. Mixed failure was the dominant mode of failure in all groups. CONCLUSIONS: The application of silane, irrespective of the use of universal adhesives with or without silane, increased the porcelain repair bond strength. Thus, a separate silane application step following HF etching and the use of universal adhesives with or without silane can enhance the repair bond strength of feldspathic porcelain.

Association of Neuregulin 1 rs7835688 G > C, rs16879552 T > C and rs2439302 G > C Polymorphisms with Susceptibility to Non-Syndromic Hirschsprung's Disease.

BACKGROUND: Hirschsprung's disease (HSCR) is a heterogeneous congenital malformation of the enteric nervous system with a complex genetic etiology. We investigated if there was an association between Neuregulin-1 (NRG1) rs7835688 G > C, rs16879552 T > C and rs2439302 G > C polymorphisms and the risk of HSCR. Methods: We determined and compared the frequency of NRG1 polymorphisms rs7835688 G > C, rs16879552 T > C and rs2439302 G > C in 70 children with HSCR and 90 controls by TaqMan SNPs genotyping assays. Results: No significant differences in allele or genotype frequencies of NRG1 rs7835688 G > C, rs16879552 T > C and rs2439302 G > C polymorphisms were observed between HSCR cases and controls. Analyses showed that the NRG1 rs7835688 G > C, rs16879552 T > C and rs2439302 G > C polymorphisms were not significantly associated with an increased risk of non-syndromic HSCR. Conclusions: Our findings suggested that NRG1 rs7835688 G > C, rs16879552 T > C and rs2439302 G > C polymorphisms are not a risk factor in development of HSCR.

Strengthening positive social pathways via digital social applications in individuals with social skills deficits: A scoping review.

BACKGROUND: Effective digital social capital interventions have great potential to establish trusted social pathways to access supportive services and to enable talking about issues contributing to distress. AIM: This review explores the digital social capital interventions used in individuals with social skills deficits, and the best social health outcomes achieved. METHOD: Four databases (PubMed, CINAHL, PsychINFO, and Web of Science) were used with no time limitation, and 33 papers were included. RESULTS: A diverse range of digital social programs was used for social capital improvement based on individuals' characteristics (e.g. age range and illnesses). Programs ranged from digitally-enhanced self-help or self-guided treatment (to enhance the self-efficacy of individuals), to group treatments and/or web-based caregiver support services. They comprised mobile social apps, video blogging, video-communication system/video-conferencing, and online social communication, to more advanced techniques such as virtual reality. All of these modalities were shown to be beneficial for improving the social health of individuals. Interventions targeted two aspects of social capital: (1) cognitive social capital, focusing on enhancing trust and control, self-efficacy on life. Some examples were cognitive behavioural therapy, and increasing the received and more importantly perceived social support. (2) structural social capital, focusing on individuals' relationships with family/carers, friends, peers to other connections at the macro level, such as health care providers and their community as a whole. The two interconnected aspects of social capital play a role in decreasing fears of being judged by others, general fears in social interactions and interpersonal problems. CONCLUSION: Guided digital social support interventions result in open and flexible access to various resources through supportive social networks, for patients and their family members/carers.

Virtual Reality Therapy for Social Phobia: A Scoping Review.

Virtual reality (VR) has become an interesting alternative for the treatment of social phobia. This scoping review explored the impact of VR technologies in the treatment of social phobia (25 papers were included). Treatment approaches to social phobia included virtual reality exposure therapy, cognitive behaviour therapy, exposure group therapy, in vivo exposure therapy, and waiting list. VR was identified as the most successful approach, not only in improving social phobia, but also resulting in real life changes such as improvement in occupational success. VR Head Mounted Displays were used in most of studies (76%), followed by VR-based Specific Systems (24%). Although VR techniques indicated positive impact on patients to reduce their anxiety, it is paramount to consider variables such as the way therapists control the environment as well as individuals' characteristics for achieving the best outcome.

Association of Transforming Growth Factor-ß1 rs1982073 Polymorphism with Susceptibility to Acute Renal Rejection: a Systematic Review and Meta-Analysis.

PURPOSE: The association of rs1982073 (codon 10) polymorphism at Transforming Growth Factor- ß1 (TGF-ß1) gene with acute renal rejection (ARR) has been reported by several studies. However, the results were controversial. To derive a more precise estimation of this association, a meta-analysis was performed. METHODS: The eligible literatures were identified through PubMed, Scopus, Web of Science, EMBASE, SciELO, WanFang, and CNKI databases up to July 01, 2019. The pooled odds ratios (ORs) with corresponding 95% confidence intervals (CIs) were used to calculate the strength of the association. RESULTS: A total of 23 case-control studies with 795 ARR cases and 1,562 non-AR controls were selected. Pooled data revealed that there was no significant association between TGF-ß1 codon 10 polymorphism and an increased risk of ARR in the overall population (C vs. T: OR=0.908, 95% CI 0.750-1.099, p = 0.322; CT vs. TT: OR=1.074, 95% CI 0.869-1.328, p = 0.507; CC vs.TT: OR=0.509, 95% CI=0.738-1.253, p = 0.770; CC+CT vs. TT: OR = 0.917, 95% CI 0.756-1.112, p = 0.376, and CC vs. CT+TT: OR=0.995, 95% CI 0.809-1.223, p = 0.959). Moreover, stratified analysis revealed no significant association between the TGF-ß1 rs1982073 polymorphism and ARR risk by ethnicity and cases type (recipient and donor). CONCLUSION: The current meta-analysis demonstrated that the TGF-ß1 rs1982073 polymorphism was not significantly associated with increased risk of ARR. However, studies with a larger number of subjects among different ethnic groups are needed to further validate the results.

Effect of Two Polishing Systems on Surface Roughness, Topography, and Flexural Strength of a Monolithic Lithium Disilicate Ceramic.

PURPOSE: To evaluate the effect of overglazing and two polishing procedures on flexural strength and quality and quantity of surface roughness of a monolithic lithium disilicate ceramic computer-aided design (CAD) after grinding. MATERIALS AND METHODS: This in vitro study was conducted on 52 partially crystalized bar-shaped specimens (16 × 4 × 1.6 mm) of monolithic lithium disilicate ceramic. The specimens were wet polished with 600-, 800-, and 1200-grit silicon carbide papers for 15 seconds using a grinding/polishing machine at a speed of 300 rpm. Then, the specimens were crystalized and glaze-fired in one step simultaneously and randomly divided into four groups of 13: (I) Glazing group (control); (II) Grinding-glazing group, subjected to grinding with red band finishing diamond bur (46 µm) followed by glazing; (III) Grinding-D+Z group, subjected to grinding and then polishing by coarse, medium, and fine diamond rubber points (D+Z); and (IV) Grinding-OptraFine group, subjected to grinding and then polishing with a two-step diamond rubber polishing system followed by a final polishing step with an OptraFine HP brush and diamond polishing paste. The surface roughness (Ra and Rz) values (µm) were measured by a profilometer, and the mean values were compared using one-way ANOVA and Tamhane's test (post hoc comparison). One specimen of each group was evaluated under a scanning electron microscope (SEM) for surface topography. The three-point flexural strength values of the bars were measured using a universal testing machine at a 0.5 mm/min crosshead speed and recorded. The data were analyzed using one-way ANOVA and Tamhane's test (α = 0.05). RESULTS: Statistically significant differences were noted among the experimental groups for Ra, Rz (p < 0.0001), and flexural strength values (p < 0.009). The lowest Ra and Rz values were found in the grinding-OptraFine group (0.465 ± 0.153), which were significantly lower than those in glazing (p < 0.03) and grinding-glazing (p < 0.001) groups. The Ra and Rz values were not significantly different between the two polishing systems (p = 0.23 and p = 0.25, respectively). The highest flexural strength was found in the glazing group (283.350 ± 49.854 MPa) without significant differences compared to grinding-glazing (p = 0.98) and grinding-OptraFine groups (p = 0.86). The lowest flexural strength was found in grinding-D+Z group (225.070 ± 17.299), which was significantly different from the value in glazing (p < 0.03) and grinding-glazing (p < 0.04) groups. SEM analysis of polished surfaces revealed regular morphology with some striations. CONCLUSIONS: The OptraFine system created smoother and more uniform surfaces in terms of quantity (p < 0.03 for Ra, p < 0.01 for Rz) and quality of roughness compared to glazing. The flexural strength of lithium disilicate ceramic after polishing with the OptraFine system was similar to that after glazing (p = 0.86). Despite similar surface roughness after polishing with the two systems, the D+Z system reduced the flexural strength of ceramic (p < 0.03).

Discrimination of Aspergillosis, Mucormycosis, Fusariosis, and Scedosporiosis in Formalin-Fixed Paraffin-Embedded Tissue Specimens by Use of Multiple Real-Time Quantitative PCR Assays.

In a retrospective multicenter study, 102 formalin-fixed paraffin-embedded (FFPE) tissue specimens with histopathology results were tested. Two 4- to 5-µm FFPE tissue sections from each specimen were digested with proteinase K, followed by automated nucleic acid extraction. Multiple real-time quantitative PCR (qPCR) assays targeting the internal transcribed spacer 2 (ITS2) region of ribosomal DNA, using fluorescently labeled primers, was performed to identify clinically important genera and species of Aspergillus, Fusarium, Scedosporium, and the Mucormycetes The molecular identification was correlated with results from histological examination. One of the main findings of our study was the high sensitivity of the automated DNA extraction method, which was estimated to be 94%. The qPCR procedure that was evaluated identified a range of fungal genera/species, including Aspergillus fumigatus, Aspergillus flavus, Aspergillus terreus, Aspergillus niger, Fusarium oxysporum, Fusarium solani, Scedosporium apiospermum, Rhizopus oryzae, Rhizopus microsporus, Mucor spp., and Syncephalastrum Fusarium oxysporum and F. solani DNA was amplified from five specimens from patients initially diagnosed by histopathology as having aspergillosis. Aspergillus flavus, S. apiospermum, and Syncephalastrum were detected from histopathological mucormycosis samples. In addition, examination of four samples from patients suspected of having concomitant aspergillosis and mucormycosis infections resulted in the identification of two A. flavus isolates, one Mucor isolate, and only one sample having both R. oryzae and A. flavus Our results indicate that histopathological features of molds may be easily confused in tissue sections. The qPCR assay used in this study is a reliable tool for the rapid and accurate identification of fungal pathogens to the genus and species levels directly from FFPE tissues.

Antibacterial Effect of Hydroalcoholic Extract of Punica granatum Linn. Petal on Common Oral Microorganisms.

Objectives. This study aimed to assess the effect of hydroalcoholic extract of Punica granatum Linn. (P. granatum) petal on Streptococcus sanguinis, Streptococcus mutans, Streptococcus salivarius, Streptococcus sobrinus, and Enterococcus faecalis. Materials and Methods. In this in vitro study, P. granatum extract was prepared using powdered petals and water-ethanol solvent. Antibacterial effect of the extract, chlorhexidine (CHX), and ampicillin was evaluated on brain heart infusion agar (BHIA) using the cup-plate method. By assessing the diameter of the growth inhibition zone, the minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC) of the extract were determined for the above-mentioned bacteria. Results. Hydroalcoholic extract of P. granatum petal had inhibitory effects on the proliferation of all five bacterial strains with maximum effect on S. mutans with MIC and MBC of 3.9 mg/mL. The largest growth inhibition zone diameter belonged to S. sanguinis and the smallest to E. faecalis. Ampicillin and CHX had the greatest inhibitory effect on S. sanguinis. Conclusions. Hydroalcoholic extract of P. granatum had a significant antibacterial effect on common oral bacterial pathogens with maximum effect on S. mutans, which is the main microorganism responsible for dental plaque and caries.

Surface topography and bond strengths of feldspathic porcelain prepared using various sandblasting pressures.

OBJECTIVE: The purpose of this study was to determine the bond strength of composite resin to feldspathic porcelain and its surface topography after sandblasting at different pressures. METHODS: In this in vitro study, 68 porcelain disks were fabricated and randomly divided into four groups of 17. The porcelain surface in group 1 was etched with hydrofluoric acid. Groups 2, 3, and 4 were sandblasted at 2, 3 and 4 bars pressure, respectively. Surface topography of seven samples in each of the four groups was examined by a scanning electron microscope (SEM). The remaining 40 samples received the same silane agent, bonding agent, and composite resin and they were then subjected to 5000 thermal cycles and evaluated for shear bond strength. Data were analyzed using one-way anova. The mode of failure was determined using stereomicroscope and SEM. RESULTS: The highest shear bond strength was seen in group 4. however, statistically significant differences were not seen between the groups (P = 0.780). The most common mode of failure was cohesive in porcelain. The SEM showed different patterns of hydrofluoric acid etching and sandblasting. CONCLUSION: Increasing the sandblasting pressure increased the surface roughness of feldspathic porcelain but no difference in bond strength occurred.

Relationship of Gingival Pigmentation with Passive Smoking in Women.

BACKGROUND: Oral mucosal pigmentation is among the most common findings in smokers, affecting smile esthetics. Passive smoking significantly compromises the health of non-smoker individuals particularly women. The purpose of this study was to assess the relationship of passive smoking with oral pigmentation in non-smoker women. MATERIALS AND METHODS: This historical-cohort study was conducted on a case group of 50 married women who were unemployed, not pregnant, non-smoker, had no systemic condition causing cutaneous or mucosal pigmentation, were not taking any medication causing cutaneous or mucosal pigmentation and had a heavy smoker husband. The control group comprised of 50 matched females with no smoker member in the family. Both groups were clinically examined for presence of gingival pigmentation and the results were analyzed using chi-square and logistic regression tests. RESULTS: Gingival pigmentation was found in 27 (54%) passive smokers and 14 (28%) controls (P=0.01). The odds ratio (OR) of gingival pigmentation in women exposed to secondhand smoke of their husbands (adjusted for education and having a smoker parent at childhood) was 3 (95% confidence interval; CI: 1.26 - 7.09). House floor area was correlated with gingival pigmentation in female passive smokers (P=0.025). CONCLUSION: This study was the first to describe the relationship between secondhand smoke and gingival pigmentation in women and this effect was magnified in smaller houses.

Effect of Extension and Type of Composite-Restored Class II Cavities on Biomechanical Properties of Teeth: A Three Dimensional Finite Element Analysis.

OBJECTIVES: Controversy exists regarding cavity preparation for restoration of interproximal caries in posterior teeth in terms of preserving the tooth structure and suitable stress distribution. This study aimed to assess the effect of extension and type of class II cavities and the remaining tooth structure in maxillary premolars restored with composite resin on the biomechanical properties of teeth using finite element method (FEM). MATERIALS AND METHODS: Using FEM, eight three-dimensional (3D) models of class II cavities in maxillary premolars with variable mesiodistal (MD) dimensions, variable thickness of the residual wall in-between the mesial and distal cavities and different locations of the wall were designed. Other dimensions were the same in all models. Cavities were restored with composite resin. A load equal to the masticatory force (200N) was applied to the teeth. Finite element analysis (FEA) was used to calculate the von Mises stress. RESULTS: Stress in the enamel margin increased by increasing the MD dimensions of the cavities. Deviation of the residual wall between the mesial and distal cavities from the tooth center was found to be an important factor in increasing stress concentration in the enamel. Increasing the MD dimensions of the cavity did not cause any increase in stress concentration in dentin. CONCLUSION: Increasing the MD dimensions of the cavities, decreasing the thickness of the residual wall between the mesial and distal cavities and its deviation from the tooth center can increase stress concentration in the enamel but not in dentin.

Anbarnesa: The Past Tradition, the Future Medicine.

CONTEXT: In the Iranian traditional medicine, anbarnesa smoke derived from burning female donkey's dung has long been used for treatment of inflammatory ulcers and infections of the middle and external ear with no significant side effects. The aim of this study was to introduce anbarnesa and discuss its therapeutic effects. EVIDENCE ACQUISITION: We conducted a systematic search in PubMed, Medline, Google, and Google Scholar databases to find studies on anbarnesa. The keywords searched were as follows: "anbarnesa," "traditional medicine," "medicinal smoke," "donkey," "dung," "antimicrobial," "inflammation," "infection," and "cytotoxicity. RESULTS: Literature review reveals that ANNAS (anbarnesa smoke) enhances wound healing, decreases scar formation, inhibits growth of cancer cells (Hela and KB) and has antimicrobial properties. Also, ANNAS combined with propylene glycol is nontoxic in 1/64, 1/128, and 1/256 dilutions. CONCLUSIONS: The constituents of anbarnesa smoke mainly possess antibacterial, anti-inflammatory, and growth inhibition effects on cancer cells.

Surface treatment of feldspathic porcelain: scanning electron microscopy analysis.

PURPOSE: Topographic analysis of treated ceramics provides qualitative information regarding the surface texture affecting the micromechanical retention and locking of resin-ceramics. This study aims to compare the surface microstructure following different surface treatments of feldspathic porcelain. MATERIALS AND METHODS: This in-vitro study was conducted on 72 porcelain discs randomly divided into 12 groups (n=6). In 9 groups, feldspathic surfaces were subjected to sandblasting at 2, 3 or 4 bar pressure for 5, 10 or 15 seconds with 50 µm alumina particles at a 5 mm distance. In group 10, 9.5% hydrofluoric acid (HF) gel was applied for 120 seconds. In group 11, specimens were sandblasted at 3 bar pressure for 10 seconds and then conditioned with HF. In group 12, specimens were first treated with HF and then sandblasted at 3 bar pressure for 10 seconds. All specimens were then evaluated under scanning electron microscopy (SEM) at different magnifications. RESULTS: SEM images of HF treated specimens revealed deep porosities of variable sizes; whereas, the sandblasted surfaces were more homogenous and had sharper peaks. Increasing the pressure and duration of sandblasting increased the surface roughness. SEM images of the two combined techniques showed that in group 11 (sandblasted first), HF caused deeper porosities; whereas in group 12 (treated with HF first) sandblasting caused irregularities with less homogeneity. CONCLUSION: All surface treatments increased the surface area and caused porous surfaces. In groups subjected to HF, the porosities were deeper than those in sandblasted only groups.