RESUMO
Molecular simulations based on classical force fields are a powerful method for shedding light on the complex behavior of biomolecules in solution. When cosolutes are present in addition to water and biomolecules, subtle balances of weak intermolecular forces have to be accounted for. This imposes high demands on the quality of the underlying force fields, and therefore force field development for small cosolutes is still an active field. Here, we present the development of a new urea force field from studies of urea solutions at ambient and elevated hydrostatic pressures based on a combination of experimental and theoretical approaches. Experimental densities and solvation shell properties from ab initio molecular dynamics simulations at ambient conditions served as the target properties for the force field optimization. Since urea is present in many marine life forms, elevated hydrostatic pressure was rigorously addressed: densities at high pressure were measured by vibrating tube densitometry up to 500â¯bar and by X-ray absorption up to 5â¯kbar. Densities were determined by the perturbed-chain statistical associating fluid theory equation of state. Solvation properties were determined by embedded cluster integral equation theory and ab initio molecular dynamics. Our new force field is able to capture the properties of urea solutions at high pressures without further high-pressure adaption, unlike trimethylamine-N-oxide, for which a high-pressure adaption is necessary.
Assuntos
Simulação de Dinâmica Molecular , Ureia/química , Pressão , Soluções/química , Termodinâmica , Água/químicaRESUMO
The molecular mechanisms responsible for outstanding lubrication of natural systems, like articular joints, have been the focus of scientific research for several decades. One essential aspect is the lubrication under pressure, where it is important to understand how the lubricating entities adapt under dynamic working conditions in order to fulfill their function. We made a structural investigation of a model system consisting of two of the molecules present at the cartilage interface, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine and hyaluronan, at high hydrostatic pressure. Phospholipid layers are found at the cartilage surfaces and are able to considerably reduce friction. Their behavior under load and varied solution conditions is important as pressures of 180 bar are encountered during daily life activities. We focus on how divalent ions, like Ca2+, affect the interaction between DPPC and hyaluronan, as other investigations have indicated that calcium ions influence their interaction. It could be shown that already low amounts of Ca2+ strongly influence the interaction of hyaluronan with DPPC. Our results suggest that the calcium ions increase the amount of adsorbed hyaluronan indicating an increased electrostatic interaction. Most importantly, we observe a modification of the DPPC phase diagram as hyaluronan absorbs to the bilayer which results in an Lα-like structure at low temperatures and a decoupling of the leaflets forming an asymmetric bilayer structure.
RESUMO
In this work, the effect of cholesterol on the pressure response of solid-supported phospholipid multilayers is analyzed. It is shown that DMPC multilayers become highly pressure-responsive by the incorporation of low amounts of cholesterol, resulting in a strong pressure-induced expansion of the bilayer spacing. This is accompanied by a high tendency of the multilayer system to detach from the substrate. Increasing the cholesterol concentration reduces the pressure-induced expansion and the membrane structure remains largely unchanged upon pressurization, consequently the stability of the multilayers improves. For a determination of the influence of the substrate, the pressure-dependent behavior of multilayers is compared to that of solid-supported bilayers and multi-lamellar vesicles in bulk solution. While single-supported bilayers remain largely unaffected by external pressure independent of their cholesterol content, multi-lamellar vesicles and multilayers behave similarly.
Assuntos
Colesterol/química , Dimiristoilfosfatidilcolina/química , Bicamadas Lipídicas/química , Pressão , Espalhamento a Baixo Ângulo , Difração de Raios XRESUMO
We present an in situ X-ray reflectivity study of the adsorption behavior of the protein lysozyme on titanium oxide layers under variation of different thermodynamic parameters, such as temperature, hydrostatic pressure, and pH value. Moreover, by varying the layer thickness of the titanium oxide layer on a silicon wafer, changes in the adsorption behavior of lysozyme were studied. In total, we determined less adsorption on titanium oxide compared with silicon dioxide, while increasing the titanium oxide layer thickness causes stronger adsorption. Furthermore, the variation of temperature from 20 to 80 °C yields an increase in the amount of adsorbed lysozyme at the interface. Additional measurements with variation of the pH value of the system in a region between pH 2 and 12 show that the surface charge of both protein and titanium oxide has a crucial role in the adsorption process. Further pressure-dependent experiments between 50 and 5000 bar show a reduction of the amount of adsorbed lysozyme with increasing pressure.
Assuntos
Muramidase/metabolismo , Titânio/química , Água/química , Adsorção , Concentração de Íons de Hidrogênio , Muramidase/química , Propriedades de Superfície , Temperatura , TermodinâmicaRESUMO
An X-ray reflectivity study on the adsorption behavior of human apolipoprotein A1 (apoA1) at hydrophilic and hydrophobic interfaces is presented. It is shown that the protein interacts via electrostatic and hydrophobic interactions with the interfaces, resulting in the absorption of the protein. pH dependent measurements at the solid/liquid interface between silicon dioxide and aqueous protein solution show that in a small pH range between pH 4 and 6, adsorption is increased due to electrostatic attraction. Here, the native shape of the protein seems to be conserved. In contrast, the adsorption at the liquid/gas interface is mainly driven by hydrophobic effects, presumably by extending the hydrophobic regions of the amphipathic helices, and results in a conformational change of the protein during adsorption. However, the addition of differently charged membrane-forming lipids at the liquid/gas interface illustrates the ability of apoA1 to include lipids, resulting in a depletion of the lipids from the interface.
Assuntos
Apolipoproteína A-I/química , Proteínas/química , Dióxido de Silício/química , Água/química , Ar , Humanos , Concentração de Íons de Hidrogênio , Interações Hidrofóbicas e Hidrofílicas , Eletricidade Estática , Tensão SuperficialRESUMO
We have gained new insight into the so-called hydrophobic gap, a molecularly thin region of decreased electron density at the interface between water and a solid hydrophobic surface, by X-ray reflectivity experiments and molecular dynamics simulations at different hydrostatic pressures. Pressure variations show that the hydrophobic gap persists up to a pressure of 5â kbar. The electron depletion in the interfacial region strongly decreases with an increase in pressure, indicating that the interfacial region is compressed more strongly than bulk water. The decrease is most significant up to 2â kbar; beyond that, the pressure response of the depletion is less pronounced.
RESUMO
In this work, the interaction of soy sauces with hydrophobic surfaces has been analyzed. Hydrophobic self-assembled monolayers on gold or silicon dioxide were used to harvest conditioning layers from soy sauce products with varying amounts of additives. The data was compared to adsorption of soy protein and glutamic acid as common ingredients. Spectral ellipsometry revealed that all tested sauces led to the formation of thin overlayers on hydrophobic surfaces. Products with less additives yielded adlayers in the same thickness range as pure soy protein. In contrast, sauces with more ingredients create distinctly thicker films. Using water contact angle goniometry, it is shown that all adlayers render the substrate more hydrophilic. Infrared spectroscopy provided a deeper insight into the adlayer chemistry and revealed that the adlayer composition is dominated by protein rich components. X-ray reflectivity on selected films provided further insight into the density profiles within the adlayers on the molecular scale.
Assuntos
Interações Hidrofóbicas e Hidrofílicas , Alimentos de Soja/análise , Análise de Alimentos , Manipulação de Alimentos , Ouro/química , Dióxido de Silício/química , Espectroscopia de Infravermelho com Transformada de Fourier , Propriedades de Superfície , Água/análise , Raios XRESUMO
The effect of hydrostatic pressure on the structure of a bicontinuous microemulsion in the presence of a solid interface has been studied by X-ray reflectometry and compared to the bulk behavior determined by small-angle X-ray scattering. Surface-induced lamellar ordering is observed close to the hydrophilic interface, which persists upon compression. The lamellar domains are compressed, but the correlation length of lamellar order does not change with pressure. SAXS measurements on the bulk microemulsion revealed an increased order upon pressurization. Although pressure can cause the formation of highly ordered lamellar phases from ordered bicontinuous cubic phases, such a scenario is not observed for the disordered analogue studied here. High pressure increases the stiffness of the interfacial surfactant layer, but this is not sufficient to overcome the loss in conformational entropy that would result from a transition to an ordered lamellar phase. Possible technological and biological implications of our results are briefly discussed.
RESUMO
In this work, the structure of solid-supported lipid multilayers exposed to increased hydrostatic pressure was studied in situ by X-ray reflectometry at the solid-liquid interface between silicon and an aqueous buffer solution. The layers' vertical structure was analyzed up to a maximum pressure of 4500 bar. The multilayers showed phase transitions from the fluid into different gel phases. With increasing pressure, a gradual filling of the sublayers between the hydrophilic head groups with water was observed. This process was inverted when the pressure was decreased, yielding finally smaller water layers than those in the initial state. As is commonly known, water has an abrasive effect on lipid multilayers by the formation of vesicles. We show that increasing pressure can reverse this process so that a controlled switching between multi- and bilayers is possible.
Assuntos
Bicamadas Lipídicas/química , Dimiristoilfosfatidilcolina/química , Pressão Hidrostática , Transição de Fase , Silício , Água/químicaRESUMO
A study of lysozyme adsorption below a behenic acid membrane and at the solid-liquid interface between aqueous lysozyme solution and a silicon wafer in the presence of sodium chloride is presented. The salt concentration was varied between 1 mmol L(-1) and 1000 mmol L(-1). X-ray reflectivity data show a clear dependence of the protein adsorption on the salt concentration. Increasing salt concentrations result in a decreased protein adsorption at the interface until a complete suppression at high concentrations is reached. This effect can be attributed to a reduced attractive electrostatic interaction between the positively charged proteins and negatively charged surfaces by charge screening. The measurements at the solid-liquid interfaces show a transition from unoriented order of lysozyme in the adsorbed film to an oriented order with the short protein axis perpendicular to the solid-liquid interface with rising salt concentration.