RESUMO
We report nano-selective area growth (NSAG) of BGaN by MOCVD on AlN/Si(111) and GaN templates resulting in 150 nm single crystalline nanopyramids. This is in contrast to unmasked or micro-selective area growth, which results in a multi-crystalline structure on both substrates. Various characterization techniques were used to evaluate NSAG as a viable technique to improve BGaN material quality on AlN/Si(111) using results of GaN NSAG and unmasked BGaN growth for comparison. Evaluation of BGaN nanopyramid quality, shape and size uniformity revealed that the growth mechanism is the same on both the templates. Further STEM analysis of BGaN nanopyramids on AlN/Si (111) templates confirmed that these are single-crystalline structures without any dislocations, likely due to single nucleation occurring in the 80 nm mask opening. CL results correspond to boron content between 1.7% and 2.0% in the nanopyramids. We conclude that NSAG is promising for growth of high-quality BGaN nanostructures and complex nano-heterostructures, especially for low-cost silicon substrates.
RESUMO
The present work is concerned with the improvement of thermal properties and mechanical strength of adhesive joints consisting of an epoxy adhesive layer bonding aluminium substrates by grafted nanosilica. Epoxy resin/silica nanocomposites were prepared by using functionalized silica. Silica was functionalized by amine group (SiO2-NH2). It was identified by Raman and Fourier Transform Infrared (FTIR). Effects of silica on viscoelastic properties for epoxy resin and its assemblies with aluminium substrates were studied by Dynamical Mechanical Analysis (DMA). Particles distribution was characterized by Scanning Electron Microscope (SEM). Our experimental results showed that functionalized silica presents a better distribution in the matrix than the pure silica. Our results also showed that grafting of functionalized silica improves the glass transition temperature (Tg) and the ultimate strength of aluminium/epoxy/aluminium assembly.
