Quantifying the performance enhancement facilitated by fractional-order implementation of classical control strategies for nanopositioning.

For most nanopositioning systems, maximizing positioning bandwidth to accurately track periodic and aperiodic reference signals is the primary performance goal. Closed-loop control schemes are employed to overcome the inherent performance limitations such as mechanical resonance, hysteresis and creep. Most reported control schemes are integer-order and combine both damping and tracking actions. In this work, fractional-order controllers from the positive position feedback family namely: the Fractional-Order Integral Resonant Control (FOIRC), the Fractional-Order Positive Position Feedback (FOPPF) controller, the Fractional-Order Positive Velocity and Position Feedback (FOPVPF) controller and the Fractional-Order Positive, Acceleration, Velocity and Position Feedback (FOPAVPF) controller are designed and analysed. Compared with their classical integer-order implementation, the fractional-order damping and tracking controllers furnish additional design (tuning) parameters, facilitating superior closed-loop bandwidth and tracking accuracy. Detailed simulated experiments are performed on recorded frequency-response data to validate the efficacy, stability and robustness of the proposed control schemes. The results show that the fractional-order versions deliver the best overall performance.

Two-degrees-of-freedom PI2D controller for precise nanopositioning in the presence of hardware-induced constant time delay.

The fast and accurate tracking of periodic and arbitrary reference trajectories is the principal goal in many nanopositioning applications. Flexure-based piezoelectric stack driven nanopositioners are widely employed in applications where accurate mechanical displacements at these nanometer scales are required. The performance of these nanopositioners is limited by the presence of lightly damped resonances in their dynamic response and actuator nonlinearities. Closed-loop control techniques incorporating both damping and tracking are typically used to address these limitations. However, most tracking schemes employed use a first-order integrator where a triangular trajectory commonly used in nanopositioning applications necessitates a double integral for zero-error tracking. The phase margin of the damped system combined with the hardware-induced delay deem the implementation of a double-integrator unstable. To overcome this limitation, this paper presents the design, analysis and application of a new control scheme based on the structure of the traditional Two-Degrees-of-Freedom PID controller (2DOF-PID). The proposed controller replaces the integral action of the traditional 2DOF-PID with a double integral action (2DOF-PI2D). Despite its simplicity, the proposed controller delivers superior tracking performance compared to traditional combined damping and tracking control schemes based on well-reported designs such as positive position feedback (PPF), Integral resonant control (IRC), and Positive Velocity and Position Feedback (PVPF). The stability of the control system is analyzed in the presence of a time delay in the system. Experimental results validating the efficacy of the proposed chattering-free control of a piezo-driven nanopositioning system are included.

Fractional order implementation of Integral Resonant Control - A nanopositioning application.

By exploiting the co-located sensor-actuator arrangement in typical flexure-based piezoelectric stack actuated nanopositioners, the polezero interlacing exhibited by their axial frequency response can be transformed to a zero-pole interlacing by adding a constant feed-through term. The Integral Resonant Control (IRC) utilizes this unique property to add substantial damping to the dominant resonant mode by the use of a simple integrator implemented in closed loop. IRC used in conjunction with an integral tracking scheme, effectively reduces positioning errors introduced by modelling inaccuracies or parameter uncertainties. Over the past few years, successful application of the IRC control technique to nanopositioning systems has demonstrated performance robustness, easy tunability and versatility. The main drawback has been the relatively small positioning bandwidth achievable. This paper proposes a fractional order implementation of the classical integral tracking scheme employed in tandem with the IRC scheme to deliver damping and tracking. The fractional order integrator introduces an additional design parameter which allows desired pole-placement, resulting in superior closed loop bandwidth. Simulations and experimental results are presented to validate the theory. A 250% improvement in the achievable positioning bandwidth is observed with proposed fractional order scheme.

Wiener-Hopf optimal control of a hydraulic canal prototype with fractional order dynamics.

This article addresses the control of a laboratory hydraulic canal prototype that has fractional order dynamics and a time delay. Controlling this prototype is relevant since its dynamics closely resembles the dynamics of real main irrigation canals. Moreover, the dynamics of hydraulic canals vary largely when the operation regime changes since they are strongly nonlinear systems. All this makes difficult to design adequate controllers. The controller proposed in this article looks for a good time response to step commands. The design criterium for this controller is minimizing the integral performance index ISE. Then a new methodology to control fractional order processes with a time delay, based on the Wiener-Hopf control and the Padé approximation of the time delay, is developed. Moreover, in order to improve the robustness of the control system, a gain scheduling fractional order controller is proposed. Experiments show the adequate performance of the proposed controller.