Restricted access media-molecularly imprinted polymer for propranolol and its application to direct injection analysis of beta-blockers in biological fluids.

A restricted access media-molecularly imprinted polymer (RAM-MIP) for propranolol (PRP) has been prepared for direct injection analysis of beta-blockers in biological fluids. First, the MIP for PRP was prepared using methacrylic acid and ethylene glycol dimethacrylate as the functional monomer and cross-linker, respectively, by a multi-step swelling and polymerization method. Next, a 1:1 mixture of glycerol monomethacrylate and glycerol dimethacrylate was used for hydrophilic surface modification, and added directly to the MIP for PRP after 4 h from the start of polymerization. Then further polymerization was carried out for 20 h. The obtained RAM-MIP for PRP showed excellent molecular recognition ability for PRP, good ones for alprenolol (ALP) and pindolol, and fair ones for other beta-blockers. The RAM-MIP was applied for direct injection analysis of ALP enantiomers in a rat plasma sample by a column-switching HPLC system using a beta-cyclodextrin phenylcarbamate-bonded silica column as the analytical column. The calibration graph, constructed from peak area versus each ALP enantiomer concentration, was linear with a correlation coefficient of > 0.999 over the concentration ranges of 12.5-250 ng ml(-1). The limit of quantitation was 12.5 ng ml(-1) with a 50 microl injection. This method could be applicable for the assay of ALP enantiomers at the therapeutic plasma levels, and have wide applicability for the assay of beta-blockers in biological fluids.

Preparation of uniformly sized molecularly imprinted polymers for phenolic compounds and their application to the assay of bisphenol A in river water.

Uniformly sized molecularly imprinted polymers, which can recognize bisphenol A (BPA), have been prepared by a multi-step swelling and polymerization method using BPA or a structurally related analogue of BPA [p-t-octylphenol (OP) or p-t-butylphenol (BP)] as the template molecule, 4-vinylpyridine as the functional monomer, and ethylene glycol dimethacrylate as the cross-linker. The BP-imprinted polymer showed higher molecular recognition ability for BPA than the OP-imprinted polymer. The BPA- and BP-imprinted polymers were applied for the assay of a trace amount of BPA in river water using column-switching HPLC with fluorescence detection: A BPA-imprinted polymer was used for removal of BPA from the pretreatment eluent as the trap column, and a BP-imprinted polymer was used for selective pretreatment and enrichment of BPA in river water as the pretreatment column. The calibration graph, constructed from peak area data plotted versus BPA concentration, was linear with a correlation coefficient of >0.999 in the concentration ranges of 25-1000 ppt. The limit of quantitation was 25 ppt with a 5-ml injection. The column-switching HPLC system was successfully applied for the assay of BPA in river water.

Uniformly sized molecularly imprinted polymer for (S)-nilvadipine. Comparison of chiral recognition ability with HPLC chiral stationary phases based on a protein.

Uniformly sized molecularly imprinted polymers (MIPs) for (S)-nilvadipine have been prepared by a multistep swelling and polymerization method using methacrylic acid, 2-(trifluoromethyl)acrylic acid, 2-vinylpyridine, or 4-vinylpyridine (4-VPY) as a functional monomer and ethylene glycol dimethacrylate (EDMA) as a cross-linker. The chiral recognition abilities of the MIPs for nilvadipine and other dihydropyridine calcium antagonists were evaluated using a mixture of sodium phosphate buffer (or water) and acetonitrile or only acetonitrile as the mobile phase. The (S)-nilvadipine-imprinted 4-VPY-co-EDMA polymers gave the highest resolution for nilvadipine among the MIPs prepared. In addition, the enantioseparation of nilvadipine was attained using the (S)-nilvadipine-imprinted EDMA polymers, without use of a functional monomer. 1H NMR and molecular modeling studies suggested a one-to-one hydrogen-bonding-based complex formation of (S)-nilvadipine with 4-VPY in chloroform. These results reveal that the (S)-nilvadipine-imprinted EDMA polymers could recognize the template molecule by its molecular shape, and that in addition to this recognition, hydrophobic and hydrogen-bonding interactions seems to play important roles in the retention and chiral recognition of nilvadipine on the 4-VPY-co-EDMA polymers in hydroorganic mobile phases. By optimizing chromatographic conditions such as column temperature and flow rate, the baseline separation of nilvadipine enantiomers was attained with a short analysis time and with a column efficiency comparable to commercially available chiral stationary phases based on a protein, such as ovomucoid or alpha1-acid glycoprotein.

Uniformly sized molecularly imprinted polymers for bisphenol A and beta-estradiol: retention and molecular recognition properties in hydro-organic mobile phases.

Uniformly sized molecularly imprinted polymers (MIPs) for bisphenol A (BPA) have been prepared using ethylene glycol dimethacrylate (EDMA) as a cross-linker and methacrylic acid, 2-diethylaminoethyl methacrylate or 4-vinylpyridine (4-VPY) as a functional monomer or without use of a functional monomer. The MIPs obtained for BPA were evaluated using a mixture of phosphate buffer (or water) and acetonitrile or only acetonitrile as the mobile phase. Among the MIPs prepared, that using 4-VPY showed the highest retentivity and selectivity for BPA. The highest selectivity factor, which is defined as the ratio of the retention factors (k) on the molecularly imprinted and non-imprinted polymers, k(imprinted)/k(non-imprinted), was 9.4 for BPA on the BPA-imprinted 4-VPY-co-EDMA polymers, while that for beta-estradiol on the beta-estradiol-imprinted 4-VPY-co-EDMA polymers was 2.4. The differences in the selectivity factors between BPA and beta-estradiol on the respective MIPs could be ascribable to differences in the number of interaction sites. It is plausible that the phenol groups of BPA could interact with two pyridyl groups of the MIP by hydrogen bonding interactions, while there is only one such site for beta-estradiol. Furthermore, the results suggest that hydrophobic and hydrogen bonding interactions can play an important role in the retention and recognition of BPA and beta-estradiol in the hydro-organic mobile phase, while hydrogen bonding interactions seem to be useful for the retention and recognition when acetonitrile is used as the mobile phase.

Strain-Induced "Band Flips" in Cyclodecaamylose and Higher Homologues.

The cavity of the larger molecule has less space for guests! Unlike the structure of the smaller annular cyclodextrins, that of the higher homologues of cycloamyloses (CAs) with more than ten glucose units contains a 90° kink between adjacent glucose residues within one half of the molecule and a 180° band flip between adjacent units in different halves (see depicted section of the CA14 structure) to yield butterfly-shaped structures with narrow, groovelike cavities.