Utilization of additives in biodiesel blends for improving the diesel engine performance and minimizing emissions through a modified Taguchi approach.

Biodiesel from Jatropha oil is produced through catalyzed homogeneous transesterification. Hydrogen peroxide (H2O2) is considered as additive. Blends of Jatropha considered in the present study are 60% diesel, (40-A)% biodiesel and A% additive, varying A from 0 to 10. Identifying optimal input variables (such as additive volume percentage, injection pressure, and load) is important for improving the engine performance and reducing emissions. Air-fuel ratio; brake specific fuel consumption (BSFC); and brake thermal efficiency (BTE) are the engine performance characteristics. Carbon monoxide (CO); carbon dioxide (CO2); exhaust gas temperature (EGT); nitrogen oxide (NOx); and smoke opacity are the emission characteristics. 27 experiments need to be performed for the assigned 3 levels and 3 input variables. The Taguchi's L9 orthogonal array (OA) is chosen to perform only 9 experiments to obtain the optimal solution. The expected range of performance characteristics and emissions was obtained following a modified Taguchi approach. Empirical relationships are developed and verified through engine performance and emission characteristics.

Performance indicators for the optimal BTE of biodiesels with additives through engine testing by the Taguchi approach.

Biodiesel commercialization is questionable due to poor brake thermal efficiency. Biodiesel utilization should be improved with the addition of fuel additives. Hydrogen peroxide is a potential fuel additive due to extra hydrogen and oxygen content, which improves the combustion process. In this experimental study, biodiesel has been produced from Jatropha oil employing catalyzed transesterification homogeneously to examine its influence on the performance and emissions at engine loads with 1500 rpm utilizing a four-stroke single-cylinder diesel engine. D60B40 (having 60% diesel and 40% biodiesel) and D60B30A10 (60% diesel, 30% biodiesel and 10% hydrogen peroxide (H2O2)), are the fuel mixtures in the current study. The addition of H2O2 reduces emissions and enhances the combustion process. This effect occurred due to the micro-explosion of the injected fuel particles (which increases in-cylinder pressure and heat release rate (HRR)). An increase of 20% in BTE and 25% reduction in BSFC for D60B30A10 was observed compared to D60B40. Significant reduction in emissions of HC up to 17.54%, smoke by 24.6% CO2 by 3.53%, and an increase in NOx was noticed when the engine is operated with D60B30A10. The HRR increased up to 18.6%, ID reduced by 10.82%, and in-cylinder pressure increased by 8.5%. Test runs can be minimized as per Taguchi's design of experiments. It is possible to provide the estimates for the full factorial design of experiments. Exhaust gas temperature standards are evaluated and examined for all fuel blends.