RESUMO
PURPOSE: This study was aimed at analyzing the effect of disinfectants on the roughness and mechanical properties of computer-aided design/computer-aided manufacturing (CAD/CAM) polymethylmethacrylate (PMMA) dentures. MATERIALS AND METHODS: Two groups of denture base resins were tested: heat-polymerized and milled blocks. The specimens were shaped (n=80) for flexural strength (FS), flexural modulus (FM), and (n=240) for the properties of roughness (Ra) and microhardness alterations (KHN). They were categorized into the following groups based on immersion: control (deionized water), H1 (1% sodium hypochlorite), H05 (0.5% sodium hypochlorite), and C2 (2% chlorhexidine) groups. The immersion periods were 0 (T0), 130 (T1), and 260 (T2) cycles. Statistical analyses were performed for flexural properties using the three-way analysis of variance (ANOVA). Microhardness and surface roughness were analyzed using repeatedmeasures ANOVA. A significance level of 5% was set. RESULTS: CAD/CAM PMMA showed higher FS (P = .001) and FM (P < .001) than conventional PMMA. The KHN value was superior to the conventional PMMA (P < .001). The chemical solution affected the surface roughness of both resins (P = .007). The CAD/CAM PMMA block showed increased Ra values when H1 was used. Cycling separately increased the FS of conventional PMMA (T1 vs. baseline; P < .05). However, the FM of CAD/CAM PMMA was higher (T1 and T2 vs. baseline; P < .05). The time factor increased the microhardness of both resins (T2 vs. baseline; P < .05). CONCLUSION: The CAD/CAM resin showed higher values compared to conventional PMMA in all tests, regardless of the chemical solution used; however, the values obtained for both resins were clinically acceptable. Int J Prosthodont 2023. doi: 10.11607/ijp.8301.
RESUMO
AIM: Oral hygiene technique is an important factor in maintaining the health and comfort of hospitalized patients given the frequent presence of oral biofilm and pathogens brought on by mouth breathing. This is an important practice to assist patients in intensive care, in particular those who are intu-bated and under mechanical ventilation because the realization of oral hygiene reduces the patient's risk of complications and length of hospitalization. The objective of this research was to evaluate the oral health condition of patients hospitalized in an intensive care unit (ICU) and to clarify the importance of protocol standardization involving these patients' buccal hygiene. MATERIALS AND METHODS: In this study, the sample consisted of 45 patients admitted to an ICU who were evaluated in relation to the oral biofilm score index. RESULTS: The results indicated that there was no significant difference in the biofilm score associated with the genre (p = 0.091), age group (p = 0.549), or teething profile (p = 0.207). However, the biofilm score was greater in partial and fully edentulous patients when compared with dentulous patients. CONCLUSION: Based on these results, it is recommended that care providers in ICUs complete the relevant oral health care training programs. CLINICAL SIGNIFICANCE: When in the ICU, suitable dental conduct following a protocol of prevention of oral biofilm can lead to earlier diagnosis and can prevent the spread of pathogenic microorganisms, particularly those that are systemic in patients with low immunity.
