Synthesis of a new solid-phase extractor and its application to preconcentration and determination of lead in water samples.

A procedure for preconcentration and determination of lead in water is described. The method is based on the sorption of Pb(II) in a minicolumn packed with a functionalized sorbent and subsequent elution with acidic solution. The determination of lead content in the eluate was carried out using flame atomic absorption spectrometry. The sorbent was prepared by immobilization of the ligand 4-(5'-bromo-2'-thiazolylazo)orcinol on polystyrene-divinylbenzene through an azo spacer. Diazotization and coupling reactions were used for synthesis of the sorbent. Some variables affecting the preconcentration were optimized using a full factorial design. Under optimized conditions, the method presented a detection limit of 0.5 microg/L and enrichment factor of 36 for a sample volume of 25 mL. The accuracy of the method was tested by the determination of lead in a standard reference material (National Institute of Standards and Technology 1643d Fresh Water). The proposed procedure was applied to the determination of lead in samples of natural and drinking waters.

A new functionalized resin and its application in preconcentration system with multivariate optimization for nickel determination in food samples.

In this work, Amberlite XAD-2 resin functionalized with 4,5-dihydroxy-1,3-benzenedisulfonic acid was synthesized, characterized and applied as a new packing material for an on-line system to nickel preconcentration. The method is based on the sorption of Ni(II) ions in a minicolumn containing the synthesized resin, posterior desorption using an acid solution and measurement of the nickel by spectrophotometry (PAR method). The optimization of the system was performed using factorial design and Doehlert matrix considering five variables: eluent concentration, PAR solution pH, sample flow rate, PAR solution concentration and sample pH. Signals were measured as peak height by using an instrument software. Using the experimental conditions defined in the optimization, the method allowed nickel determination with achieved sampling rate of 25 samples per hour, detection limit (3s) of 2microgl(-1) and precision (assessed as the relative standard deviation) of 8.2-2.6%, for nickel solutions of 10.0-200.0microgl(-1) concentration, respectively. The experimental enrichment factor of the proposed system was 46, for 120s preconcentration time. The proposed procedure was applied for nickel determination in food samples. Recoveries of spike additions (5 or 10microgg(-1)) to food samples were quantitative (94-110%).