Application of a nanostructured platform and imprinted sol-gel film for determination of chlorogenic acid in food samples.

Chlorogenic acid (CGA) is a polyphenol derivative that widely exists in higher plants like fruits, vegetables, black teas, and some traditional Chinese medicines. In this work, we have proposed a sensitive and selective electrochemical sensor for detection of CGA. The sensor was based on a glassy carbon electrode (GCE) modified with a functional platform by grafting vinyltrimethoxysilane (VTMS) in multi-walled carbon nanotubes (MWCNTs) and covered by a molecularly imprinted siloxane (MIS) film prepared using the sol-gel process. The VTMS was grafted onto the surface of the MWCNTs via in situ free radical polymerization. The MIS was obtained from the acid-catalyzed hydrolysis/condensation of a solution consisting of tetraethoxysilane (TEOS), phenyltriethoxysilane (PTEOS), (3-aminopropyl)trimethoxysilane (APTMS), and CGA as a template molecule. The modification procedure was evaluated by differential pulse voltammetry (DPV) and scanning electron microscopy (SEM). Under optimized operational conditions, a linear response was obtained covering a concentration ranging from 0.08µmolL(-1) to 500µmolL(-1) with a detection limit (LOD) of 0.032µmolL(-1). The proposed sensor was applied to CGA determination in coffee, tomato, and apple samples with recoveries ranging from 99.3% to 108.6%, showing a promising potential application in food samples. Additionally, the imprinted sensor showed a significantly higher affinity for target CGA than the non-imprinted siloxane (NIS) sensor.

Electrocatalytic activity of 4-nitrophthalonitrile-modified electrode for the l-glutathione detection.

The present work describes the substantial electrocatalytic activity of (NC)2C6H3-NHOH/(NC)2C6H3-NO redox couple-modified electrode toward the low voltage detection of l-glutathione (GSH), in neutral medium, at an applied potential of 0.4V versus Ag/AgCl. After optimizing the operational conditions, the sensor provided a linear response range for GSH from 8.0 up to 83.0 micromol L(-1) with sensitivity, detection and quantification limits of 54nA L micromol(-1), 2.7 micromol L(-1) and 8.0 micromol L(-1), respectively. The proposed sensor presented higher sensitivity when compared to other modified electrodes described in the literature and showed a stable response for at least 100 successive determinations. The repeatability of the measurements with the same sensor and different sensors, evaluated in terms of relative standard deviation, were 4.1 and 5.0%, respectively, for n=10. The developed sensor was applied for GSH determination in yeast extract and the results were statistically the same with those obtained by the comparative method described in the literature at a confidence level of 95%.

Amperometric sensor for nitrite based on copper tetrasulphonated phthalocyanine immobilized with poly-L-lysine film.

In this work, an amperometric sensor for nitrite detection based on a glassy carbon electrode modified with copper tetrasulphonated phthalocyanine immobilized by polycationic poly-L-lysine film is presented. The modified electrode showed an excellent catalytic activity toward nitrite oxidation. A linear response range from 0.12 up to 12.20 micromol L(-1) was obtained with a sensitivity of 0.83 microA L micromol(-1). The detection limit for nitrite was 36 nmol L(-1). The repeatability of the proposed sensor, evaluated in terms of relative standard deviation, was 1% for 10 measurements of 10 micromol L(-1) nitrite solution. Finally, the developed sensor was applied for nitrite determination in water samples and the results were in agreement to the comparative method. The average recovery for the samples was 101 (+/-4)%.

Amperometric sensor for nitrite using a glassy carbon electrode modified with alternating layers of iron(III) tetra-(N-methyl-4-pyridyl)-porphyrin and cobalt(II) tetrasulfonated phthalocyanine.

The development of a highly sensitive amperometric sensor for nitrite using a glassy carbon electrode modified with alternated layers of iron(III) tetra-(N-methyl-4-pyridyl)-porphyrin (FeT4MPyP) and cobalt(II) tetrasulfonated phthalocyanine (CoTSPc) is described. The modified electrode showed an excellent catalytic activity and stability for the nitrite oxidation decreasing the peak potentials about 200mV toward less positive values and presenting much higher peak currents than those obtained on the bare GC electrode. A linear response range of 0.2-8.6mumoll(-1), with a sensitivity of 0.37muAlmumol(-1) and detection limit of 0.04mumoll(-1) were obtained with this sensor. The repeatability of the proposed sensor, evaluated in term of relative standard deviation, was verified to be 1.4% for 10 measurements of 0.2mumoll(-1) nitrite solution. Interference caused by common ions has been investigated in simulated mixtures containing high concentration level of interfering ions and the sensor was found to be tolerant against these ions. The developed sensor was applied for the nitrite determination in water samples and the results were in agreement with those obtained by a comparative method described in the literature. The average recovery for these samples was 100.1 (+/-0.7)%.