High-order harmonics generation in Cd and Pd laser-induced plasmas.

We demonstrate the generation of high-order harmonics of laser pulses in palladium and cadmium plasmas. We adjusted the wavelength of driving pulses to investigate the resonance enhancement in different ranges of extreme ultraviolet region. The summation of incommensurate waves during the two-color pump of Pd and Cd plasmas allowed the generation of a broader range of harmonics. The theoretical aspects of the two-color pump of the laser-induced plasma are discussed.

Amorphous Calcium Phosphate and Amorphous Calcium Phosphate Carboxylate: Synthesis and Characterization.

Amorphous calcium phosphate (ACP) is the first solid phase precipitated from a supersaturated calcium phosphate solution. Naturally, ACP is formed during the initial stages of biomineralization and stabilized by an organic compound. Carboxylic groups containing organic compounds are known to regulate the nucleation and crystallization of hydroxyapatite. Therefore, from a biomimetic point of view, the synthesis of carboxylate ions containing ACP (ACPC) is valuable. Usually, ACP is synthesized with fewer steps than ACPC. The precipitation reaction of ACP is rapid and influenced by pH, temperature, precursor concentration, stirring conditions, and reaction time. Due to phosphates triprotic nature, controlling pH in a multistep approach becomes tedious. Here, we developed a new ACP and ACPC synthesis approach and thoroughly characterized the obtained materials. Results from vibration spectroscopy, nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), true density, specific surface area, and ion release studies have shown a difference in the physiochemical properties of the ACP and ACPC. Additionally, the effect of a carboxylic ion type on the physiochemical properties of ACPC was characterized. All of the ACPs and ACPCs were synthesized in sterile conditions, and in vitro analysis was performed using MC-3T3E1 cells, revealing the cytocompatibility of the synthesized ACPs and ACPCs, of which the ACPC synthesized with citrate showed the highest cell viability.

Tribovoltaic Performance of TiO2 Thin Films: Crystallinity, Contact Metal, and Thermoelectric Effects.

Tribovoltaic devices are attracting increasing attention as motion-based energy harvesters due to the high local current densities that can be generated. However, while these tribovoltaic devices are being developed, debate remains surrounding their fundamental mechanism. Here, we fabricate thin films from one of the world's most common oxides, TiO2, and compare the tribovoltaic performance under contact with metals of varying work functions, contact areas, and applied pressure. The resultant current density shows little correlation with the work function of the contact metal and a strong correlation with the contact area. Considering other effects at the metal-semiconductor interface, the thermoelectric coefficients of different metals were calculated, which showed a clear correlation with the tribovoltaic current density. On the microscale, molybdenum showed the highest current density of 192 mA cm-2. This work shows the need to consider a variety of mechanisms to understand the tribovoltaic effect and design future exemplar tribovoltaic devices.

Synthesis and Investigation of Novel Optical Active SiO2 Glasses with Entrapped YAG:Ce Synthesized via Sol-Gel Method.

We present a crack-free optically active SiO2 glass-composite material containing YAG:Ce synthesized via a modified sol-gel technique. A glass-composite material consisting of yttrium aluminum garnet doped with Ce3+ (YAG:Ce) was entrapped into a SiO2 xerogel. This composite material was prepared using a sol-gel technique with modified gelation and a drying process to obtain crack-free optically active SiO2 glass. The concentration of the YAG:Ce was from 0.5 to 2.0 wt%. All synthesized samples were characterized via X-ray diffraction (XRD) and scanning electron microscopy (SEM) techniques, confirming their exceptional quality and structural integrity. The luminescence properties of the obtained materials were studied. Overall, the prepared samples' excellent structural and optical quality makes them great candidates for further investigation, or even potential practical application. Furthermore, boron-doped YAG:Ce glass was synthesized for the first time.

Effect of Post-Printing Cooling Conditions on the Properties of ULTEM Printed Parts.

This paper aimed to estimate the effect of post-printing cooling conditions on the tensile and thermophysical properties of ULTEM® 9085 printed parts processed by fused deposition modeling (FDM). Three different cooling conditions were applied after printing Ultem samples: from 180 °C to room temperature (RT) for 4 h in the printer (P), rapid removal from the printer and cooling from 200 °C to RT for 4 h in the oven (O), and cooling at RT (R). Tensile tests and dynamic mechanical thermal analysis (DMTA) were carried out on samples printed in three orthogonal planes to investigate the effect of the post-printing cooling conditions on their mechanical and thermophysical properties. Optical microscopy was employed to relate the corresponding macrostructure to the mechanical performance of the material. The results obtained showed almost no difference between samples cooled either in the printer or oven and a notable difference for samples cooled at room temperature. Moreover, the lowest mechanical performance and sensitivity to the thermal cooling conditions were defined for the Z printing direction due to anisotropic nature of FDM and debonding among layers.

Enhanced optical properties of yttrium aluminum garnet with the yttrium vanadate impurity phase.

Yttrium aluminum garnet doped with europium with an additional impurity phase of yttrium vanadate doped europium has been prepared in different ways: synthesized by a sol-gel route and mechanically mixed in a mortar. The obtained samples were characterized by X-ray diffraction analysis, and scanning electron microscopy. Photoluminescence spectra were recorded to understand the role of the impurity phase in the garnet's optical properties. The impurity phase showed a significant contribution to the optical properties of Y3Al5O12:1%Eu.

Effect of Core-Shell Rubber Nanoparticles on the Mechanical Properties of Epoxy and Epoxy-Based CFRP.

The aim of the research was to estimate the effect of core-shell rubber (CSR) nanoparticles on the tensile properties, fracture toughness, and glass transition temperature of the epoxy and epoxy-based carbon fiber reinforced polymer (CFRP). Three additives containing CSR nanoparticles were used for the research resulting in a filler fraction of 2-6 wt.% in the epoxy resin. It was experimentally confirmed that the effect of the CSR nanoparticles on the tensile properties of the epoxy resin was notable, leading to a reduction of 10-20% in the tensile strength and elastic modulus and an increase of 60-108% in the fracture toughness for the highest filler fraction. The interlaminar fracture toughness of CFRP was maximally improved by 53% for ACE MX 960 at CSR content 4 wt.%. The glass transition temperature of the epoxy was gradually improved by 10-20 °C with the increase of CSR nanoparticles for all of the additives. A combination of rigid and soft particles could simultaneously enhance both the tensile properties and the fracture toughness, which cannot be achieved by the single-phase particles independently.

Investigation of Nonlinear Optical Processes in Mercury Sulfide Quantum Dots.

The authors report the third-harmonic generation, nonlinear refraction, and nonlinear absorption in HgS quantum dot (QD) suspensions and films using the nanosecond and femtosecond pulses. High conversion efficiency (7 × 10-4) towards the third harmonic (TH) of the 900-1700 nm, 150 fs laser in the thin (70 nm) films containing HgS QDs deposited on the glass substrates is obtained. The authors analyze spectral dependencies of the TH, nonlinear refractive indices, and nonlinear absorption coefficients of QDs in the 500-1700 nm range and discuss the relation between the TH process and the low-order nonlinear optical properties of these quantum dots.

Unraveling the Structure and Properties of Layered and Mixed ReO3-WO3 Thin Films Deposited by Reactive DC Magnetron Sputtering.

Tungsten trioxide (WO3) is a well-known electrochromic material with a wide band gap, while rhenium trioxide (ReO3) is a "covalent metal" with an electrical conductivity comparable to that of pure metals. Since both WO3 and ReO3 oxides have perovskite-type structures, the formation of their solid solutions (ReO3-WO3 or Re x W1-x O3) can be expected, which may be of significant academic and industrial interest. In this study, layered WO3/ReO3, ReO3/WO3, and mixed ReO3-WO3 thin films were produced by reactive DC magnetron sputtering and subsequent annealing in air at 450 °C. The structure and properties of the films were characterized by X-ray diffraction, optical spectroscopy, Hall conductivity measurements, conductive atomic force microscopy, scanning and transmission electron microscopy, energy-dispersive X-ray spectroscopy, and X-ray photoemission spectroscopy. First-principles density functional theory calculations were performed for selected compositions of Re x W1-x O3 solid solutions to model their crystallographic structure and electronic properties. The calculations predict metallic conductivity and tetragonal distortion of solid solutions in agreement with the experimental results. In contrast to previously reported methods, our approach allows us to produce the WO3-ReO3 alloy with a high Re content (>50%) at moderate temperatures and without the use of high pressures.

Hydrothermal Synthesis and Properties of Yb3+/Tm3+ Doped Sr2LaF7 Upconversion Nanoparticles.

We report the procedure for hydrothermal synthesis of ultrasmall Yb3+/Tm3+ co-doped Sr2LaF7 (SLF) upconversion phosphors. These phosphors were synthesized by varying the concentrations of Yb3+ (x = 10, 15, 20, and 25 mol%) and Tm3+ (y = 0.75, 1, 2, and 3 mol%) with the aim to analyze their emissions in the near IR spectral range. According to the detailed structural analysis, Yb3+ and Tm3+ occupy the La3+ sites in the SLF host. The addition of Yb3+/Tm3+ ions has a huge impact on the lattice constant, particle size, and PL emission properties of the synthesized SLF nanophosphor. The results show that the optimal dopant concentrations for upconversion luminescence of Yb3+/Tm3+ co-doped SLF are 20 mol% Yb3+ and 1 mol% Tm3+ with EDTA as the chelating agent. Under 980 nm light excitation, a strong upconversion emission of Tm3+ ions around 800 nm was achieved. In addition, the experimental photoluminescence lifetime of Tm3+ emission in the SLF host is reported. This study discovered that efficient near IR emission from ultrasmall Yb3+/Tm3+ co-doped SLF phosphors may have potential applications in the fields of fluorescent labels in bioimaging and security applications.

Oxidation State and Local Structure of Chromium Ions in LaOCl.

LaOCl doped with 0-10 mol% Cr was synthesized by thermal decomposition of chlorides. X-ray diffraction (XRD) analysis revealed that incorporation of chromium results in a decrease of the lattice parameter a and a simultaneous increase of the lattice parameter c. The local structure of chromium ions was studied with X-ray photoelectron (XPS), X-ray absorption (XANES), multifrequency electron paramagnetic resonance (EPR) and electron-nuclear double resonance (ENDOR) spectroscopy techniques. It was determined that synthesis in oxidizing atmosphere promotes the incorporation of chromium ions predominantly in the 5+ oxidation state. Changes of chromium oxidation state and local environment occur after a subsequent treatment in reducing atmosphere. Spin-Hamiltonian (SH) parameters for a Cr5+ and two types of Cr3+ centers in LaOCl were determined from the EPR spectra simulations.

Time-resolved luminescence and excitation spectroscopy of Co-doped Gd3Ga3Al2O12 scintillating crystals.

Cerium doped Gd3Ga3Al2O12 (GGAG) single crystals as well as GGAG:Ce single crystals co-doped by divalent (Mg2+, Ca2+) and tetravalent (Zr4+, Ti4+) ions have been studied by means of time-resolved luminescence as well as the excitation luminescence spectroscopy in vacuum ultraviolet (VUV) and soft X-ray (XUV) spectral range. Tunable laser excitation was applied for time-resolved experiments in order to obtain luminescence decay curves under excitations in Ce3+, Gd3+ and excitonic absorption bands. The influence of the co-dopant ions on the Ce3+ luminescence decay kinetics is elucidated. The fastest luminescence decay was observed for the Mg2+ co-doped crystals under any excitation below bandgap energy indicating the perturbation of the 5d states of Ce3+ by Mg2+ ions. Synchrotron radiation was utilized for the luminescence excitation in the energy range from 4.5 to 800 eV. Special attention was paid to the analysis of Ce3+ excitation spectra in VUV and XUV spectral range where multiplication of electronic excitation (MEE) processes occur. Our results demonstrated that GGAG:Ce single crystals co-doped by Mg2+ ions as well as the GGAG:Ce crystal annealed in vacuum reveal the most efficient excitation of Ce3+ emission in VUV-XUV excitation range. The role of intrinsic defects in MEE processes in the co-doped as well as in the annealed GGAG:Ce single crystals is discussed.