Well-defined nanomagnetic nitrilotriacetic acid complex of Cu(ii) supported on silica-coated nanosized magnetite: a new highly efficient and magnetically separable catalyst for C-N bond formation.

A nitrilotriacetic acid (NTA) complex of Cu(ii) supported on silica-coated nanosized magnetite Fe3O4@SiO2-Pr-DEA-[NTA-Cu(ii)]2 was prepared as a new well-defined magnetically separable nanomaterial and fully characterized via IR, XRD, FESEM, TEM, TGA, DLS, BET, VSM, solid-state UV-vis spectroscopy, EDX, ICP-OES, and FESEM-EDX map analyses. Thereafter, it was successfully applied as a new easily magnetically separable and reusable heterogeneous nanocatalyst for the Buchwald-Hartwig C-N bond formation reaction in DMF at 110 °C. Using this method, various kinds of nitrogen heterocycles, such as imidazoles, 2-methyl-1H-imidazole, benzimidazole, indole, and 10H-phenothiazine as well as aliphatic secondary amines such as piperidine, piperazine, morpholine, dimethylamine, and diethylamine, were reacted with aryl halide compounds, and the desired products were obtained with good to excellent yields. In all cases, the applied catalyst could be recovered easily and rapidly using an external magnet and reused 7 times without significant loss of catalytic activity.

Fe3O4@SiO2 core/shell functionalized by gallic acid: a novel, robust, and water-compatible heterogeneous magnetic nanocatalyst for environmentally friendly synthesis of acridine-1,8-diones.

In this study, we conveniently prepared a novel robust heterogeneous magnetic nanocatalyst using a Fe3O4@SiO2 core/shell stabilized by gallic acid. The catalyst was completely characterized by various physicochemical techniques, including infrared spectroscopy (FT-IR), X-ray diffraction (XRD), dynamic light scattering (DLS), transmission electron microscopy (TEM), field emission scanning electron microscopy (FE-SEM), thermogravimetric analysis (TGA), potentiometric titration, energy dispersive X-ray microanalysis (EDX), vibrating sample magnetometer (VSM), zeta potential analysis, and BET. The potential ability of the newly developed sulfonated nanocatalyst was then exploited in the multicomponent synthesis of acridine-1,8-dione derivatives by considering the green chemistry matrix and under mild conditions. Various aldehydes and amines were smoothly reacted with dimedone, affording the desired products in good to excellent yields. The introduction of sulfonic groups using gallic acid allowed the development of a water-compatible and highly recyclable catalytic system for reactions in an aqueous environment. The prepared catalyst can be readily magnetically separated and reused eight times without significant loss of activity. High synthetic efficiency, using a recyclable and eco-sustainable catalyst under mild conditions, and easy product isolation are salient features of this catalytic system, which makes this protocol compatible with the demands of green chemistry.

Direct additive-free N-formylation and N-acylation of anilines and synthesis of urea derivatives using green, efficient, and reusable deep eutectic solvent ([ChCl][ZnCl2]2).

In the current report, we introduce a simple, mild efficient and green protocol for N-formylation and N-acetylation of anilines using formamide, formic acid, and acetic acid as inexpensive, nontoxic, and easily available starting materials just with heating along stirring in [ChCl][ZnCl2]2 as a durable, reusable deep eutectic solvent (DES), which acts as a dual catalyst and solvent system to produce a wide range of formanilides and acetanilides. Also, a variety of unsymmetrical urea derivatives were synthesized by the reaction of phenyl isocyanate with a range of amine compounds using this benign DES in high to excellent yields. [ChCl][ZnCl2]2 showed good recycling and reusability up to four runs without considerable loss of its catalytic activity.

Novel Cu(ii) acidic deep eutectic solvent as an efficient and green multifunctional catalytic solvent system in base-free conditions to synthesize 1,4-disubstituted 1,2,3-triazoles.

A novel green Cu(ii)-acidic deep eutectic solvent (Cu(ii)-ADES) bearing copper salt, choline chloride, and gallic acid ([ChCl]4[2GA-Cu(ii)]) was synthesized and thoroughly specified by physicochemical approaches such as FT-IR, EDX, XRD, Mapping, ICP, and UV-Vis analyses and physicochemical properties. After the detection of authentic data, the central composite design (CCD) was utilized to accomplish the pertaining tests and develop the optimum condition, and, in the following, [ChCl]4[2GA-Cu(ii)] was applied as a green multifunctional catalytic solvent system in reducing agent-free and base-free condition for the three-component click reaction from sodium azide, alkyl, allyl, ester, and benzyl halide, and terminal alkyne made from amines and caprolactam as a cyclic amide to furnish a successful new library of 1,4-disubstituted 1,2,3-triazoles with a yield of up to 98%. The Cu(ii)-ADES is stable and can comfortably be recovered and reused without a considerable decline in its acting for seven cycles. This triazole synthesizing methodology is distinguished via its atom economy, operational facility, short reaction times, diverse substrate scope, and high performance for large-scale synthesis of the desired products including: -CN and -NO2 as efficient functional groups.

Retraction: Bis-salophen palladium complex immobilized on Fe3O4@SiO2 nanoparticles as a highly active and durable phosphine-free catalyst for Heck and copper-free Sonogashira coupling reactions.

Retraction of 'Bis-salophen palladium complex immobilized on Fe3O4@SiO2 nanoparticles as a highly active and durable phosphine-free catalyst for Heck and copper-free Sonogashira coupling reactions' by Ali Reza Sardarian et al., Dalton Trans., 2019, 48, 3132-3145, https://doi.org/10.1039/C9DT00060G.

Bis-salophen palladium complex immobilized on Fe3O4@SiO2 nanoparticles as a highly active and durable phosphine-free catalyst for Heck and copper-free Sonogashira coupling reactions.

New Fe3O4@SiO2 core-shell superparamagnetic nanoparticles functionalized by a bis-salophen Schiff base Pd complex were synthesized and employed as an efficient magnetic nanocatalyst in the Heck and Sonogashira cross coupling reactions. The synthesized nanostructures were characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), dynamic light scattering (DLS), energy dispersive X-ray analysis (EDX), X-ray photoelectron spectroscopy (XPS), elemental analysis (CHN), cyclic voltammetry (CV), Brunauer-Emmett-Teller analysis (BET), and UV-vis spectroscopy. The morphology and size of the nanoparticles were investigated by FE-SEM and TEM analyses. Furthermore, the magnetic properties of the catalyst were investigated by VSM analysis. The loading content and leaching amounts of palladium on the catalyst were measured by inductively coupled plasma (ICP) analysis. Also, the thermal behavior of this magnetic heterogeneous catalyst was studied using a TGA instrument. This heterogeneous catalytic system showed a good performance in the coupling of aryl halides with alkynes (Sonogashira reaction) as well as aryl halides with alkene derivatives (Heck reaction). High to excellent yields were achieved for these C-C coupling reactions. The catalyst can be simply separated from the reaction media by an external magnet and reused for eight consecutive runs without any significant loss of activity. Finally, the kinetics of the reactions were studied in this work.

Metal-Free Regioselective Monocyanation of Hydroxy-, Alkoxy-, and Benzyloxyarenes by Potassium Thiocyanate and Silica Sulfuric Acid as a Cyanating Agent.

A novel and efficient metal- and solvent-free regioselective para-C-H cyanation of hydroxy-, alkoxy-, and benzyloxyarene derivatives has been introduced, using nontoxic potassium thiocyanate as a cyanating reagent in the presence of silica sulfuric acid (SSA). The desired products are obtained in good to high yields without any toxic byproducts.

Highly efficient synthesis of alkyl and aryl primary thiocarbamates and dithiocarbamates under metal- and solvent-free conditions.

A highly efficient, metal-free and solvent-free process is reported for the preparation of novel series of alkyl and aryl primary thiocarbamates and dithiocarbamates through the reaction of aliphatic alcohols, phenols and thiols with thiocyanate salts in the presence of 4-dodecylbenzenesulfonic acid (DBSA) as an inexpensive, readily available and amphipathic acid reagent. All reactions proceeded smoothly, and the products are obtained in good to excellent yields. Using this method, a wide range of structurally diverse primary thiocarbamates was prepared successfully.

Evaluation of the Corrosion of Five Different Bracket-Archwire Combination: An In-vitro Analysis Using Inductively Coupled Plasma Mass Spectrometry.

STATEMENT OF THE PROBLEM: Stainless steel brackets release metallic ions following the process of corrosion in the oral environment. These released ions have potential adverse effects on health, friction between wire and bracket, staining, strength of brackets. Choosing a bracket with favorable corrosive properties; therefore, should be a goal of every practitioner. PURPOSE: The goal of this study is to compare the amount of corrosion among five different brands of brackets using inductively coupled plasma (ICP) mass spectrometry. MATERIALS AND METHOD: Five different brands of brackets (Dentaurum, 3M, Ortho Organizer, Cobas and O.R.G) were chosen and ten brackets were selected from each brand. A piece of stainless steel wire was ligated to each bracket. The bracket-archwire complex was then immersed in artificial saliva. Subsequently, the samples were analyzed using an ICP device and the levels of iron, chromium, nickel, and manganese ions were measured. RESULTS: The findings of this study demonstrated that iron was released the most from the tested brackets, followed by nickel. We also found that the Cobas bracket had the most ion release among the tested brackets (p< 0.05), while Ortho Organizer and ORG performed favorably. There was no significant difference between Dentaurum and 3M (p> 0.05). CONCLUSION: Based on the results, Ortho Organizer and ORG brackets are suggested in terms of resistance to corrosion.

Detection of nucleic acids in situ: novel oligonucleotide analogues for target-assembled DNA-mounted exciplexes.

This research describes the effects of structural variation and medium effects for the novel split-oligonucleotide (tandem) probe systems for exciplex-based fluorescence detection of DNA. In this approach the detection system is split at a molecular level into signal-silent components, which must be assembled correctly into a specific 3-dimensional structure to ensure close proximity of the exciplex partners and the consequent exciplex fluorescence emission on excitation. The model system consists of two 8-mer oligonucleotides, complementary to adjacent sites of a 16-mer DNA target. Each probe oligonucleotide is equipped with functions able to form an exciplex on correct, contiguous hybridization. This study investigates the influence of a number of structural aspects (i.e. chemical structure and composition of exciplex partners, length and structure of linker groups, locations of exciplex partner attachment, as well as effects of media) on the performance of DNA-mounted exciplex systems. The extremely rigorous structural demands for exciplex formation and emission required careful structural design of linkers and partners for exciplex formation, which are here described. Certain organic solvents (especially trifluoroethanol) specifically favour emission of the DNA-mounted exciplexes, probably the net result of the particular duplex structure and specific solvation of the exciplex partners. The exciplexes formed emitted at approximately 480 nm with large Stokes shifts ( approximately 130-140 nm). Comparative studies with pyrene excimer systems were also carried out.

Synthetic analogues of the manzamenones and plakoridines which inhibit DNA polymerase.

An array of novel analogues of the marine oxylipins, the manzamenones and plakoridines, have been prepared in divergent fashion using an approach modelled on a biogenetic theory. Many of the target compounds show potent inhibition of DNA polymerases alpha and beta and human terminal deoxynucleotidyl transferase (TdT).

Exciplex fluorescence emission from simple organic intramolecular constructs in non-polar and highly polar media as model systems for DNA-assembled exciplex detectors.

Organic intramolecular exciplexes, N-(4-dimethylaminobenzyl)-N-(1-pyrenemethyl)amine (1) and N'-4-dimethylaminonaphthyl-N-(1-pyrenemethyl)amine (2), were used as model systems to reveal major factors affecting their exciplex fluorescence, and thus lay the basis for developing emissive target-assembled exciplexes for DNA-mounted systems in solution. These models with an aromatic pyrenyl hydrocarbon moiety as an electron acceptor appropriately connected to an aromatic dimethylamino electron donor component (N,N-dimethylaminophenyl or N,N-dimethylaminonaphthyl) showed strong intramolecular exciplex emission in both non-polar and highly polar solvents. The effect of dielectric constant on the maximum wavelength for exciplex emission was studied, and emission was observed for 1 and 2 over the full range of solvent from non-polar hydrocarbons up to N-methylformamide with a dielectric constant of 182. Quantum yields were determined for these intramolecular exciplexes in a range of solvents relative to that for Hoechst 33,258. Conformational analysis of 1 was performed both computationally and via qualitative 2D NMR using (1)H-NOESY experiments. The results obtained indicated the contribution of pre-folded conformation(s) to the ground state of 1 conducive to exciplex emission. This research provides the initial background for design of self-assembled, DNA-mounted exciplexes and underpins further development of exciplex-based hybridisation bioassays.

Target-assembled tandem oligonucleotide systems based on exciplexes for detecting DNA mismatches and single nucleotide polymorphisms.

We report the first exciplex-based split-probe system for DNA detection. The detector is split at a molecular level into signal-silent components which, before a signal is generated, must be assembled correctly into a particular three-dimensional arrangement. The model system comprises of two 8-mer oligonucleotides, complementary to neighbouring sites of a 16-mer DNA target, each equipped with moieties able to form an exciplex on correct, contiguous hybridization. The exciplex emits at approximately 480 nm with a large Stokes shift (135 nm). The extremely rigorous structural demands for exciplex formation and emission were achieved by careful structural design and by the discovery that high levels of certain organic solvents (especially trifluoroethanol) specifically favour emission of the DNA-mounted exciplex, probably the net result of the particular duplex structure and specific solvation of the exciplex partners. Inserts and mismatches can be effectively detected by this exciplex construct giving potential for single nucleotide polymorphism detection.

An exciplex-based, target-assembled fluorescence system with inherently low background to probe for specific nucleic acid sequences.

A novel detection technique, called ExciProbes, has been developed to proof-of-principle level for DNA oligonucleotides. The new approach is based on the use of two short oligonucleotides complementary to a target nucleic acid sequence. Each short-probe oligonucleotide bears the separated parts of a new class of fluorescence detector, an exciplex. These isolated parts of the detector have no inherent signal at the detection wavelength. They are designed to detect biotarget by being assembled by the target itself to give a new molecular entity (the exciplex), with a characteristic fluorescence and very large Stokes shift (typically >150 nm). The technique is not related to fluorescence resonance energy transfer, and can potentially resolve to 1 base pair. ExciProbes can detect single or double mutations in a short sequence of DNA, and can be combined with temperature-filtering to provide allelic discrimination of single nucleotide polymorphism analysis. Compared to other fluorophore systems that have large backgrounds (typically >60%), ExciProbes show backgrounds of <1% under comparable conditions, and can be used with DNA, RNA, or synthetic nucleic acids such as locked nucleic acid.