Selective Extraction and Quantification of Hemoglobin Based on a Novel Molecularly Imprinted Nanopolymeric Structure of Poly(acrylamide-vinyl imidazole).

Imbalances in hemoglobin (Hb) levels can lead to conditions such as anemia or polycythemia, emphasizing the importance of precise Hb extraction from blood. To address this, a novel synthetic imprinted polymer was meticulously developed for capturing and separating Hb. Poly(acrylamide-vinylimidazole) nanopolymer (poly(AAm-VIM)) was synthesized using acrylamide and vinyl imidazole as functional monomers through surfactant-free emulsion polymerization. Characterization using FTIR, particle size, zeta potential, and SEM ensured the polymer's structure. The Hb-imprinted nanopolymer (Hb-poly(AAm-VIM)) demonstrated notable specificity, with a calculated Hb-specific adsorption value (Qmax) of 3.7377 mg/g in a medium containing 2.5 mg/mL Hb. The molecularly imprinted polymer (MIP) exhibited approximately 5 times higher Hb adsorption than the nonimprinted polymer (NIP). Under the same conditions, the imprinted nanopolymer displayed 2.39 and 2.17 times greater selectivity for Hb over competing proteins such as bovine serum albumin (BSA) and lysozyme (Lys), respectively. Also, SDS-PAGE analysis results confirmed the purification of Hb by the molecularly imprinted nanopolymer. These results underscore the heightened specificity and efficacy of the molecularly imprinted nanopolymer in selectively targeting Hb atoms among other proteins. Incorporating such polymers is justified by their notable affinity, cost-effectiveness, and facile production. This research contributes valuable insights into optimizing synthetic imprinted polymers for efficient Hb extraction, with potential in medical diagnostics and treatment applications.

Removal of amoxicillin via chromatographic monolithic columns: comparison between batch and continuous fixed bed.

This study presented a hydrophobic interaction-based poly(HEMA-MATrp) monolithic chromatographic column (MCC) to remove amoxicillin from aqueous solutions. In addition to their porous structure, monolithic-filled columns offer superior properties without loss of performance, which is one of the points that make them unique. The specific surface area of the monolithic column synthesized by the bulk polymerization of 2-hydroxyethyl methacrylate and N-Methacryloyl-L-tryptophan. Also, poly(HEMA-MATrp) MCC has been characterized via FTIR, SEM, and elemental analysis. According to BET analysis, the specific surface area of the poly(HEMA-MATrp) monolithic chromatographic column (MCC) is 14.2 mg/g. The adsorption and desorption of amoxicillin in an aqueous solution were investigated comparatively in both continuous fixed bed and batch adsorption. The highest adsorption value of amoxicillin was determined at pH 7 in the presence of PBS as 62.11 mg/g. The appropriate adsorption isotherm for the adsorption of amoxicillin was Langmuir, and the reaction kinetics was pseudo-second-order. No significant loss was observed for the adsorption capacity of poly(HEMA-MATrp) MCC after the 5 cycles of adsorption-desorption studies. Also, the loss for the adsorption capacity of the monolithic column is just %5.2 after 6-month storage, proving the reusability and storability of the monolithic column.

Preparation of Immobilised 17ß-Estradiol-Imprinted Nanoparticles onto Bacterial Cellulose Nanofibres to Use for the Removal of 17ß-Estradiol from Wastewater.

Estradiol, a phenolic steroid oestrogen, is one of the endocrine-disrupting chemicals (EDCs) found in natural and tap waters. The detection and removal of EDCs is attracting attention daily as they negatively affect animals' and humans' endocrine functions and physiological conditions. Therefore, developing a fast and practical method for the selective removal of EDCs from waters is essential. In this study, we prepared 17ß-estradiol (E2)-imprinted HEMA-based nanoparticles onto bacterial cellulose nanofibres (E2-NP/BC-NFs) to use for the removal of E2 from wastewater. FT-IR and NMR confirmed the structure of the functional monomer. The composite system was characterised by BET, SEM, µCT, contact angle, and swelling tests. Additionally, the non-imprinted bacterial cellulose nanofibres (NIP/BC-NFs) were prepared to compare the results of E2-NP/BC-NFs. Adsorption of E2 from aqueous solutions was performed in batch mode and investigated via several parameters for optimisation conditions. The effect of pH studies was examined in the 4.0-8.0 range using acetate and phosphate buffers and a concentration of E2 of 0.5 mg/mL. The maximum E2 adsorption amount was 254 µg/g phosphate buffer at 45 °C. The experimental data show that the Langmuir is a relevant isotherm model for E2 adsorption. Additionally, the relevant kinetic model was the pseudo-second-order kinetic model. It was observed that the adsorption process reached equilibrium in less than 20 min. The E2 adsorption decreased with the increase in salt at varying salt concentrations. The selectivity studies were performed using cholesterol and stigmasterol as competing steroids. The results show that E2 is 46.0 times more selective than cholesterol and 21.0 times more selective than stigmasterol. According to the results, the relative selectivity coefficients for E2/cholesterol and E2/stigmasterol were 8.38 and 86.6 times greater for E2-NP/BC-NFs than for E2-NP/BC-NFs, respectively. The synthesised composite systems were repeated ten times to assess the reusability of E2-NP/BC-NFs.

A Novel Benzimidazole-Based Chemosensor for Fluorometric Determination of Zinc Ions.

A simple and novel Schiff base chemosensor (BMHM) based on benzimidazole was synthesized. In ethanol-water (1:1, v/v) medium on varying concentrations of Zn2+ chemosensor exhibited a strong and quick turn on fluorescence response. The Zn2+ recognition was based on the Chelation-enhanced fluorescence effect. The binding constant and limit of detection for BMHM-Zn2+ complexation were estimated to be 7.99 × 104 M-1 and 0.148 µM, respectively. The extreme fluorescent enhancement caused by Zn2+ binding in chemosensor BMHM occurred at a pH range of 6-7. The practical use of chemosensor BMHM was tested by determination of Zn2+ in real water samples and comparing the results with the data obtained using high resolution inductively coupled plasma mass spectrometry.

Dopamine-imprinted monolithic column for capillary electrochromatography.

A dopamine-imprinted monolithic column was prepared and used in capillary electrochromatography as stationary phase for the first time. Dopamine was selectively separated from aqueous solution containing the competitor molecule norepinephrine, which is similar in size and shape to the template molecule. Morphology of the dopamine-imprinted column was observed by scanning electron microscopy. The influence of the organic solvent content of mobile phase, applied pressure and pH of the mobile phase on the recognition of dopamine by the imprinted monolithic column has been evaluated, and the imprinting effect in the dopamine-imprinted monolithic polymer was verified. Developed dopamine-imprinted monolithic column resulted in excellent separation of dopamine from structurally related competitor molecule, norepinephrine. Separation was achieved in a short period of 10 min, with the electrophoretic mobility of 5.81 × 10-5  m2 V-1 s-1 at pH 5.0 and 500 mbar pressure.