Osteoinductive potential of recombinant BMP-9 in bone defects of mice treated with antiresorptive agents.

The aim of the present study was to investigate the effects of recombinant human (rh)BMP-9 on bone regenerative potential in a mouse model of antibody-mediated antiresorptive therapy (AMART). A monoclonal anti-murine receptor activator of nuclear factor-kappa B ligand (RANKL) antibody (mAb) was used to create an AMART model in mice. rhBMP-9 combined with collagen membrane was implanted in calvarial defects in mAb-treated mice. After 4 weeks, the bone formative potential in the defects was evaluated by micro-computed tomography and histological approaches. The groups implanted with rhBMP-9-containing collagen membranes demonstrated substantial osteopromotive potential, with significantly greater new bone volume (Sham + BMP-9 group; 0.86 ± 0.29 mm3 and mAb + BMP-9 group; 0.64 ± 0.16 mm3) than control PBS-membranes (Sham + PBS group; 0.44 ± 0.29 mm3 and mAb + PBS group; 0.24 ± 0.12 mm3) in both sham and mAb-treated mice. In line with in vivo study, bone marrow cells isolated from both sham and mAb-treated mice confirmed greater osteogenic potential upon stimulation with rhBMP-9 in vitro. These findings suggest for the first time that local rhBMP-9 administration might be a strategy to accelerate bone regeneration in the context of AMART.

Bone apposition to a titanium-zirconium alloy implant, as compared to two other titanium-containing implants.

Implants made of commercially pure titanium (cpTi) are widely and successfully used in dentistry. For certain indications, diameter-reduced Ti alloy implants with improved mechanical strength are highly desirable. The aim was to compare the osseointegration of titanium-zirconium (TiZr) and cpTi implants with a modified sandblasted and acid-etched (SLActive) surface and with a Ti6Al4V alloy that was sand-blasted and acid-washed. Cylindrical implants with two, 0.75 mm deep, circumferential grooves were placed in the maxilla of miniature pigs and allowed to heal for 1, 2, 4 and 8 weeks. Undecalcified toluidine blue-stained ground sections were produced. Surface topography, area fraction of tissue components, and bone-to-implant contact (BIC) were determined. All materials showed significantly different surface roughness parameters. The amount of new bone within the implant grooves increased over time, without significant differences between materials. However, BIC values were significantly related to the implant material and the healing period. For TiZr and cpTi implants, the BIC increased over time, reaching values of 59.38 % and 76.15 % after 2 weeks, and 74.50 % and 84.67 % after 8 weeks, respectively. In contrast, the BIC for Ti6Al4V implants peaked with 42.29 % after 2 weeks followed by a decline to 28.60 % at 8 weeks. Significantly more surface was covered by multinucleated giant cells on Ti6Al4V implants after 4 and 8 weeks. In conclusion, TiZr and cpTi implants showed faster osseointegration than Ti6Al4V implants. Both chemistry and surface topography might have influenced the results. The use of diameter-reduced TiZr implants in more challenging clinical situations warrants further documentation in long-term clinical studies.

Osteogenic potential of autogenous bone grafts harvested with four different surgical techniques.

The osteogenic potential of autogenous bone grafts is superior to that of allografts and xenografts because of their ability to release osteoinductive growth factors and provide a natural osteoconductive surface for cell attachment and growth. In this in vitro study, autogenous bone particles were harvested by four commonly used techniques and compared for their ability to promote an osteogenic response. Primary osteoblasts were isolated and seeded on autogenous bone grafts prepared from the mandibles of miniature pigs with a bone mill, piezo-surgery, bone scraper, and bone drill (bone slurry). The osteoblast cultures were compared for their ability to promote cell attachment, proliferation, and differentiation. After 4 and 8 hrs, significantly higher cell numbers were associated with bone mill and bone scraper samples compared with those acquired by bone slurry and piezo-surgery. Similar patterns were consistently observed up to 5 days. Furthermore, osteoblasts seeded on bone mill and scraper samples expressed significantly elevated mRNA levels of collagen, osteocalcin, and osterix at 3 and 14 days and produced more mineralized tissue as assessed by alizarin red staining. These results suggest that the larger bone graft particles produced by bone mill and bone scraper techniques have a higher osteogenic potential than bone slurry and piezo-surgery.

Effects of Carnoy's solution on blood vessels of the axillary fossa of rats.

Carnoy's solution is applied to reduce the recurrence of odontogenic keratocysts and unicystic ameloblastomas. The deleterious action of this fixative on nerves has been studied but no attention has been paid to its effects on nearby vessels. The aim of this study was to investigate the effects of Carnoy's solution on blood vessels. The rat axillary artery and vein were surgically exposed, soaked with Carnoy's solution and kept in place for 2, 5 or 10 min, depending on the treatment group. The 5-min group was followed for 1, 2 and 3 weeks postoperatively. The vessels in the 2-min and 5-min exposure groups showed histological changes to the vessels, represented by focal loss of the endothelium and hyalinization of the wall. These alterations increased in the 10-min group. The vessels in the 3-week observation period revealed signs of recovery. It is concluded that Carnoy's solution can damage blood vessels but the process is reversible for exposure times less than 5 min.

Complication rates and associated factors in alveolar distraction osteogenesis: a comprehensive review.

Despite its growing popularity, alveolar distraction osteogenesis (DO) is a technically challenging operation. The purpose of this review is to estimate the types and frequencies of complications in alveolar DO and to identify factors associated with them. 26 reports of alveolar DO found in the PubMed database that met the criteria for inclusion were studied. 256 patients underwent 270 DO procedures; 109 complications arose in 77 patients (30%) with 77 distractions (29%). In 27/77 patients, more than 1 complication occurred. 20 complications (7%) were a consequence of surgery, 32 (12%) occurred during distraction, 22 (8%) during the consolidation period and 35 (13%) post-distraction. The most common complications were insufficient bone formation following the consolidation period (22 cases, 8%), regression of distraction distance (18 cases, 7%) and problems related to the distractor device (16 cases, 6%). The most severe complications occurred in 4 cases (2%). The type of device used and an augmentation rate of more than 0.5 mm/24 h were significantly related to insufficient bone formation and evidence of complications. This review indicates that complications in alveolar DO are frequent, but rarely cause severe problems or clinical decline. Appropriate treatment selection, surgical technique and adjusted protocol should decrease the number of complications.

Alveolar distraction osteogenesis: a systematic review.

This literature review was performed to analyse the outcomes of clinical studies of alveolar distraction osteogenesis (DO) listed by PUBMED between January 1996 and December 2006. A PUBMED search identified 128 articles on alveolar DO. Twenty articles covering 209 cases were analysed, considering location, device and procedural parameters, rate of augmentation, aspect of final implant placement and follow up. The mean latency period was 7.26+/-2.31 days, distraction rate 0.71+/-0.27 mm/day, rate of augmentation 6.88+/-2.52 mm and consolidation period 12.22+/-5.58 weeks. A total of 469 implants were placed and followed post loading for an average of 14.19+/-11.03 months, with a survival rate of 97%. Of the different procedural parameters, only the difference between mean consolidation period for failed (8.10+/-2.51 weeks) and successful (12.43+/-5.62 weeks) implants was statistically significant (P=0.01). Use of DO may be advantageous in terms of the success rate of implants placed in augmented sites, but there is still a lack of sufficient data based on long-term follow up. Future experimental studies should evaluate the application of different methods with a view to shortening the overall treatment period and improving the performance of implants placed in distracted alveolar ridges.

Alveolar distraction before insertion of dental implants in the posterior mandible.

We investigated the efficacy of alveolar distraction for reducing crown height:implant length ratio in the posterior mandible. Ten alveolar distractions were done in seven patients. The pre-distraction ratio of required crown height to bone height available for implantation was in all cases > or =1. Two implants were placed in each distracted area (total 20 implants). Before distraction, the mean (SD) predicted crown height was 12.8 (2.1) mm; mean bone height available for implantation was 7.8 (1.5) mm. After distraction and insertion of implants, mean crown height was 8.1 (1.9) mm, and mean implant length was 11.3 (1.9) mm. Before distraction, the mean required crown height:available bone height ratio was 1.7 (0.3); after distraction and insertion of implants, the mean crown:implant ratio was 0.7 (0.2) (P<0.0005). Alveolar distraction is effective for increasing the height of the alveolar ridge in the posterior mandibular region, and should be considered when the height of the predicted crown that is required is greater than or equal to the maximum height of bone available for implantation.